PDA

View Full Version : Tsunami and mammoth molar Suji.. PICTURE HEAVY



HHH Knives
01-08-2013, 03:57 PM
Hello and thanks for checking out the post! This one just loved the camera and I was able to get some great shots so I loaded a bunch for ya all to look at.

This 270mm Suji has a beautiful Tsunami pattern damascus blade.. Its sporting Nickle silver bolsters, with some very cool orange and yellow. stabilized mammoth mammoth tooth.. I used stainless pins, both on the bolster and the rear of the handle, and added a single mosaic pin.
As the bolster ages the stainless pin will be more and more visible.. Which I'm sure will be sweet looking after it gets some love!


The specs are as follows.

270mm blade tip to heel.
45mm tall at heel.
2.3mm thick tapering to the tip.
OAL. 15.5" or 394mm
Weight 9.5 oz.
Balance point is right at the plunge line. just in front of the bolsters approx 1/4"

http://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0101024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0071024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0561024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0581024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0321024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0411024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0721024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0181024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0031024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0241024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0751024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0821024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0731024x683.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/HHH%20Knives/MammothtoothSuji0881024x683.jpg


As always, comments and critiques encouraged and welcomed.

God Bless YA
Randy

Mr.Magnus
01-08-2013, 04:02 PM
that handle really looks like it would speak to kids. not sure if thats good or bad. :P
i like it tough, very diffrent and cool.

Crothcipt
01-08-2013, 04:05 PM
I'm loving the stabilized Mammoth looks awesome.

CanadianMan
01-08-2013, 04:16 PM
Really nice and vibrant colours from the mammoth

Mike9
01-08-2013, 04:23 PM
Beautiful blade and handle.

El Pescador
01-08-2013, 04:45 PM
The handle is out of this world.

knyfeknerd
01-08-2013, 05:05 PM
Whang-Dang that is so freakin' awesome!

HHH Knives
01-08-2013, 05:55 PM
Thanks guys.. The tooth is some that we processed and stabilized from whole tooth to finished knife. Very rewarding to finally see and use some of this tooth..

Glad you all seem to like it. Its gona be a love it or hate it thing. And I knew that when I started the handle. I personally LOVE IT.. yet i'm bias.

I want to shoot out a special thanks to my buddy Clay who has been pivotal in getting these teeth stabilized.

Andrew H
01-08-2013, 06:06 PM
I love the looks, especially the handle, but the blade might have too much upsweep to the tip for me; it's hard to tell from the pics.

Crothcipt
01-08-2013, 06:15 PM
for a 270 that isn't bad at all.

HHH Knives
01-08-2013, 07:50 PM
I love the looks, especially the handle, but the blade might have too much upsweep to the tip for me; it's hard to tell from the pics.

It always is hard to tell in a picture. The tip is actually below the bottom of the handle if ya run a straight line and I think alot of it is a camera thing. Maybe one day at a gathering etc. you can get a chance to cut something with this one!!

Thanks for the comments!! God Bless YA
Randy

The hekler
01-08-2013, 10:34 PM
You are quickly becoming the mammoth molar guy, not to take away from the knife which looks great but that handle is drop dead gorgeous! Only thing I'm not sure if is the pin in the ferrule, it might grow on me but I think it'd look cleaner without one if that possible.

HHH Knives
01-09-2013, 05:24 AM
Thanks hekler. The pin is going to become more visible as the bolster patinas. By design. I think once it gets some love that it will look much nicer. The bolster is nickle silver and it is mirror polished now. but will quickly patina. and then the stainless pin which is also mirror polished will POP. :)

Thats my story and Im sticking to it!! :D

Its a KNIFE LIFE!

RRLOVER
01-09-2013, 07:02 AM
WOW:thumbsup::thumbsup:.....She is so beautiful I want to make a western handle now.

Von blewitt
01-09-2013, 07:09 AM
WOW:thumbsup::thumbsup:.....She is so beautiful I want to make a western handle now.

If you need a guinea pig :)

Great job Randy! I really like that handle!

scotchef38
01-09-2013, 07:54 AM
Beautiful work.I am curious about the Mammoth tooth- how big was the original tooth and did you dye it or are the colours natural?

Crothcipt
01-09-2013, 08:47 PM
here is a page he did on that before. hope this helps.

http://www.kitchenknifeforums.com/showthread.php/6418-Mammoth-molar-Slabs-FS

oops wrong link I was thinking of. this one should help out.

http://www.kitchenknifeforums.com/showthread.php/6401-Woolly-Mammoth-Molar-Tooth-lt-lt-SUPER-SIZED-gt-gt

HHH Knives
01-12-2013, 04:32 PM
Thanks guys!! And thank you Corthcipt for adding the links. :)

This one should be arriving or already arrived at its new home. I cant wait for him to see it and let me know what he thinks of it and how it preforms for him!!

God Bless

JMac
01-13-2013, 10:30 PM
Knife is Gorgeous!

HHH Knives
01-18-2013, 09:11 PM
Thanks JMac!