PDA

View Full Version : Michael Symon's cutting board on Cook like an iron chef



rockbox
05-06-2011, 11:16 AM
Outside Morimoto, Michael Symon is my favorite iron chef. He just makes stuff I like eat. Have you guys ever seen the board he uses on "Cooking like an Iron Chef". It totally badass. Its an integrated board that appears to be about the size of a standard work desk. I think its made out of walnut and has a large hole cut in it for trash. I'm thinking of making making one to replace the top of my kitchen island.

http://yourfamilyviewer.com/wp-content/uploads/2010/07/CC001_CookLikeAnIC_1679ABB.jpg

Jim
05-06-2011, 11:27 AM
Is that an ewe on his shirt?

Marko Tsourkan
05-06-2011, 11:36 AM
Outside Morimoto, Michael Symon is my favorite iron chef. He just makes stuff I like eat. Have you guys ever seen the board he uses on "Cooking like an Iron Chef". It totally badass. Its an integrated board that appears to be about the size of a standard work desk. I think its made out of walnut and has a large hole cut in it for trash. I'm thinking of making making one to replace the top of my kitchen island.

http://yourfamilyviewer.com/wp-content/uploads/2010/07/CC001_CookLikeAnIC_1679ABB.jpg

Hmm...
interesting idea. I was thinking about making a 42x25" end-grain countertop for one of my kitchen cabinets, which has a trash bin next to it.
Your post gave me an idea. :)
Cutting the hole in 2.5" thick counter top could be a bit tricky, but doable with a plunge router and a circle cutting jig. I say it is tricky because of the thickness of the wood (you have to make shallow passes), otherwise it's pretty straight forward.

M

rockbox
05-06-2011, 11:43 AM
Marko,

I'm great for ideas. I'm just not so good at execution.:lol2:

Dave Martell
05-06-2011, 11:46 AM
Warren's son Josh had a counter top butcher's block (3" thick I believe) made with a hole cut in it for dumping into the trash. I believe he had Bally block make it, they're local here.

mr drinky
05-06-2011, 11:47 AM
It might be an Ozark West board. At least they advertise on their site that he uses their board on the show. Scroll down about a third of the way.

http://www.ozarkwest.com/cuboseonfone.html

k.

Lefty
05-06-2011, 11:49 AM
Curtis Stone has a miniature version out (it's not executed well either...)
I have an island designed for our next house that has a hole like that, but with a little little steps built in, so you can cover it up when not in use.

Lefty
05-06-2011, 11:51 AM
Drinky, thanks for the link. I have to admit I lingered for far too long on the first chef.
Dave has RR, I have GDL

rockbox
05-06-2011, 11:52 AM
Sorry for the huge picture, but here is another angle of it.

http://1.bp.blogspot.com/_Y1_lHso5NC0/TE8nLMD3N4I/AAAAAAAAAdo/I3LhqF5kdUU/s1600/Screen+shot+2010-07-26+at+8.41.48+PM.png

rockbox
05-06-2011, 11:54 AM
Curtis Stone has a miniature version out (it's not executed well either...)
I have an island designed for our next house that has a hole like that, but with a little little steps built in, so you can cover it up when not in use.

Now that's a great idea.

FryBoy
05-06-2011, 12:07 PM
Seems to have a metal edge around it -- what's up with that? And how would you give it a thorough cleaning?

Marko Tsourkan
05-06-2011, 12:27 PM
I think it's a concrete countertop with an area to recess the end-grain board in it.

rockbox
05-06-2011, 12:36 PM
I think its a metal molding around the outside of it.

Now that I've been thinking about it for a few more seconds, I'm thinking I may cut the hole large enough to put a small hotel pan in it. That way I can just pick up the pan and throw the trash away.

mr drinky
05-06-2011, 12:37 PM
Drinky, thanks for the link. I have to admit I lingered for far too long on the first chef.
Dave has RR, I have GDL

Whenever I see Giada looking particularly good, I yell up to my wife, "Giada is cooking up some cleavage honey." Now my good wife will actually pause the DVR if she is sportin' a low top and alert me. Good woman she is.

k.

Marko Tsourkan
05-06-2011, 01:21 PM
Marko,

I'm great for ideas. I'm just not so good at execution.:lol2:

I use very basic equipment - a contractor saw, manual clamps, a router, but I have an access to a jointer and a wide belt sander, which helps. I am on a lookout for a better table saw though. It ain't fun cutting 2" thick boards with a light-weight saw.

M

rockbox
05-06-2011, 01:30 PM
I use very basic equipment - a contractor saw, manual clamps, a router, but I have an access to a jointer and a wide belt sander, which helps. I am on a lookout for a better table saw though. It ain't fun cutting 2" thick boards with a light-weight saw.

M

I have all the tools to make it except for the drum sander. I was going to get a drum sander but I used the money to buy the grinder instead. The problem is that I don't have the time or the focus to finish my projects.

Marko Tsourkan
05-06-2011, 01:33 PM
I have all the tools to make it except for the drum sander... The problem is that I don't have the time or the focus to finish my projects.

That is the problem. I too have many ideas but not enough time for all. Renting an access to wide-belt sander is much more economical than buying a drum sander. Finding a shop that would rent time on a wide belt sander is harder. For me it was the biggest attraction moving into my present time workshop. The upstairs is a stair building business.

M

JohnnyChance
05-06-2011, 01:54 PM
Cutting the hole in 2.5" thick counter top could be a bit tricky, but doable with a plunge router and a circle cutting jig.

Hole saw:
http://www.computerpoweruser.com/images/smartcomputing/fullsize/00843400.jpg
Rough it out with the hole saw, then hand finish with file/paper should get you pretty good results.

I have a kitchen island cart (which I am now using as a computer desk) that has a IKEA cutting board counter top. $80 for a 49 1/2" x 25 5/8" board. It isn't end grain, but I don't cut on much. Then I used some extra DOM tubing I had for legs and shelf, and put some casters on it.

Marko Tsourkan
05-06-2011, 03:28 PM
Hole saw:
http://www.computerpoweruser.com/images/smartcomputing/fullsize/00843400.jpg
Rough it out with the hole saw, then hand finish with file/paper should get you pretty good results.

I have a kitchen island cart (which I am now using as a computer desk) that has a IKEA cutting board counter top. $80 for a 49 1/2" x 25 5/8" board. It isn't end grain, but I don't cut on much. Then I used some extra DOM tubing I had for legs and shelf, and put some casters on it.

I was thinking 6" hole in diameter. Plus the counter top would be about 2.5-3" so a hole saw might not be up for the task. For thinner boards it should work.

M

JohnnyChance
05-06-2011, 03:43 PM
I was thinking 6" hole in diameter. Plus the counter top would be about 2.5-3" so a hole saw might not be up for the task. For thinner boards it should work.

M

You can get 6" hole saws. And you can drill from both sides using the pilot drill hole to align them. Or if you couldn't get a 6", you could drill two 3-4" or holes next to each other and cut out the left over material between them to make a 6-8" long oval opening.

mpukas
05-06-2011, 04:24 PM
[QUOTE=rockbox;12854]Outside Morimoto, Michael Symon is my favorite iron chef. He just makes stuff I like eat. Have you guys ever seen the board he uses on "Cooking like an Iron Chef". It totally badass. Its an integrated board that appears to be about the size of a standard work desk. I think its made out of walnut and has a large hole cut in it for trash. I'm thinking of making making one to replace the top of my kitchen island.

I really like MS too...

Last time I watched MR Knuckle Sandwich, his counter tops were the same style - dark edge grain wood - but the whole counter top was wood, not inlaid like MS's. He has some very cleaver things built into it too, like recesses for small vessels - for holding salt, ground pepper, etc. - so that the tops are flush w/ the counter's surface.

Food Network must use the same designer/fabricator for all of these sets...

Marko Tsourkan
05-06-2011, 04:24 PM
You can get 6" hole saws. And you can drill from both sides using the pilot drill hole to align them. Or if you couldn't get a 6", you could drill two 3-4" or holes next to each other and cut out the left over material between them to make a 6-8" long oval opening.

Sounds like a lot of work. :)

Rottman
05-06-2011, 04:43 PM
Drilling with a hole-saw from both sides sound like a great plan to me.

wenus2
05-08-2011, 06:17 AM
I like the oval idea. What would keep one from simply using a jigsaw, start a hole and get to cuttin'?
I've actually considered something like this a few times because my sister has a friend with a very similar setup to this. The only thing is that it dumps into a trash can under the counter, which I don't really like.
I would want it to dump into a stainless hotal pan so I would be prompted to dump it after every use, and I could simply toss the pan in the dishwasher.
Otherwise it would constantly be all dank under my board, because if I can dump it bi-weekly... I will :)

Lefty
05-08-2011, 07:06 AM
The hotel pan is a great idea.
That is essentially what we did with our beef scraps at the butcher shop. We had two rectangle holes that lead to a scrap bin. A lot of very useable "scrap" would get turned into ground beef or suet later on in the day. Just because it was scrap while trimming out a roast or a bunch of steaks, doesn't mean it was scrap altogether.

Chef Niloc
05-08-2011, 08:55 AM
Outside Morimoto, Michael Symon is my favorite iron chef.

I'd have to go with iron Chef Chen Kenichi as my 2nd

Lefty
05-08-2011, 09:11 AM
I'm a Batali fan....

Vertigo
05-09-2011, 03:51 PM
I'm a Batali fan....

I wish he still played around on ICA (toying with his competitors). Miss him and his Misono.

The flaming cheese wheel was fantastic showmanship.

Lefty
05-09-2011, 07:43 PM
Hey, I like this guy! :)
My sentiments exactly! Not to mention he makes upscale mom food!

heirkb
05-09-2011, 10:09 PM
I'd have to go with iron Chef Chen Kenichi as my 2nd

I just like the guy's name.
I can't pick favorites out of the three (four not counting Iron Chef Italian) Japanese Iron Chefs, though.

SpikeC
05-09-2011, 10:24 PM
Michiba is battling chicken tonight on the cooking network.