PDA

View Full Version : WTB - Inexpensive Vintage Carbon Workhorse



skiajl6297
02-28-2013, 08:46 PM
Looking to spend < $100 for a vintage carbon blade. I'm looking for an inexpensive large chefs knife that I can really go to town sharpening and practicing on. Bevel setting, microbevels, thinning, polishing, etc. Not opposed to gnarly condition requiring work - but it needs to be fixable on stones alone. A story behind it makes it even cooler - it will be loved and well used and maybe rehandled down the road. Thanks all!

Lucretia
02-28-2013, 09:21 PM
Did you check out Son's (sachem allison) knives in this thread? He was getting rid of some big old carbon beauties. Titled "Some old favorites."

Mike9
02-28-2013, 09:29 PM
http://www.ebay.com/sch/i.html?_odkw=forgecraft+knife&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313&_nkw=45a10h&_sacat=0


Here ya go

sachem allison
02-28-2013, 10:32 PM
If you are looking for 10in ones Then that link is a good one. The 10in are much more common and can be had at a very good price. The 12 in and 14 in ones are much more difficult to find thus much more expensive. One of the 12" ones listed on the link, is incredibly pitted and may not be worth the inexpensive price tag in the long run. look at the pics carefully. The 10 in ones are definitely worth looking at.

knyfeknerd
03-01-2013, 12:29 AM
If you'd like to try one out for free for a while, try the knife library http://www.kitchenknifeforums.com/showthread.php/8884-Knife-Library/page2 The Foster Bros. knife is great. I'd be more than happy for you to experiment sharpening on it, but please no messin' with the handle.
This might give you a good feel for an old carbon blade without spending any coin.

skiajl6297
03-01-2013, 05:12 PM
Thanks all (esp Lucretia and Son) - just pulled the trigger on Son's Dexter 12" Chef! Appreciate the feedback and excited to get my hands on some vintage knife goodness.

Mike9
03-03-2013, 02:35 PM
Is that the Dexter 45A12H? If so it's a great knife I have one I converted.

skiajl6297
03-03-2013, 02:42 PM
48912 actually. Excited to own my first vintage!

Mike9
03-03-2013, 05:24 PM
Cool & congrats next you'll be checking out Mark's burl site - :lol2:

Jmadams13
03-03-2013, 08:13 PM
Congrats. Just a word of warning, old dirty carbon can become quite an addiction, lol Before you know it, you'll spend your days off browsing antique store after antique store like I do :)

Jmadams13
03-03-2013, 08:16 PM
Also, that's a great steel to practice sharpening on. It takes a great edge, and is pretty easy to move. IMO it would be a shame to mess to much with it, it is a beatiful knife as is. I almost pulled the trigger myself, just spent to much this month already

skiajl6297
03-03-2013, 09:13 PM
Primary goal is to have fun with a knife that I can really go to work on. I am really in need of fine tuning to get a screaming edge. This blade will get a lot of love from me. And who knows, maybe an older knife will intimidate my wife less and then I can get her used to using sharp, large knives! She still reaches for a short shun santoku since my knives scare her!

skiajl6297
03-07-2013, 03:00 PM
Got the knife today - thanks Son! Looking forward to some sharpening fun this weekend.

sachem allison
03-07-2013, 04:31 PM
have fun

teppanchef
03-08-2013, 12:01 AM
good luck!