View Full Version : 5/26 New Cascara Sagrada & Buckeye Burl and other Stabilized Blocks

Burl Source
05-26-2013, 08:51 PM
Today I added a bunch of new stabilized blocks to our web store.
All of these were professionally stabilized by K&G, so you know they were done right.
Just click on the photos to go to where these are located in the web store.

1st are some blocks of figured Cascara Sagrada from NW California. This wood has very small pores and very three dimensional figure that has a metallic flash that seems to move around beneath the surface of the wood.
http://i901.photobucket.com/albums/ac219/burlsource/413/2_zps533a7601.jpg (http://www.burlsource.us/servlet/the-Stabilized-Wood-BLOCKS-cln-Cascara/Categories)

These are a couple extra long blocks of California Buckeye Burl. Great coloring and burl figure. Might be large enough for a couple handles.
http://i901.photobucket.com/albums/ac219/burlsource/413/1_zpsab152c96.jpg (http://www.burlsource.us/servlet/the-Stabilized-Wood-BLOCKS-cln-Buckeye/Categories)

These are some Old Growth Redwood Burl. A bit darker than normal Redwood.
http://i901.photobucket.com/albums/ac219/burlsource/413/3_zpsb64cb888.jpg (http://www.burlsource.us/servlet/the-Stabilized-Wood-BLOCKS-cln-Redwood/Categories)

These Koa blocks will be going into the store Monday or Tuesday.
Some High Grade, unusual Orange Hawaiian Koa. These are not dyed. This is the natural coloring. Not a color you see very often with Koa.
http://i901.photobucket.com/albums/ac219/burlsource/413/ock004_zps00af8095.jpg (http://www.burlsource.us/servlet/the-Stabilized-Wood-BLOCKS-cln-Koa/Categories)

Everything in the store comes with a money back guarantee.
Free US Shipping.
$20 Flat Rate International Shipping or Free if the order is over $100
Volume discounts for larger orders are 10% if over $200, or 20% if over $500, or 30% if over $1000.

05-26-2013, 10:32 PM
Can these be cut for scales ?

Burl Source
05-27-2013, 01:56 PM
Can these be cut for scales ?
Any of the blocks can be cut into scales at no additional charge. Just make a note during checkout. I usually cut the scales about 3/8" thick unless requested otherwise.