PDA

View Full Version : Difference between Kono Gyuto and Kono Funayaki/Gyuto?



bechler
05-27-2013, 12:53 PM
Does anyone know what makes these two Kono HDs different? Thanks

bkultra
05-27-2013, 01:00 PM
The Funayaki is a much flatter profile and it is slightly thicker knife as well.

tk59
05-27-2013, 06:55 PM
I dunno about the thicker. I think there is just some variation in general, esp with regard to taper. My original KonHD was on the thick side at the tip. It took me a while to figure out why it didn't perform the way I expected it to.

bkultra
05-27-2013, 08:51 PM
The Funayaki is listed as 2.44mm and the HD2 as 2.1mm, in regards to their thickness.

marc4pt0
05-27-2013, 09:13 PM
The funayuki, as told by mark himself, was "commissioned" by him through konosuke to follow the same profile as the Murray Carter. Some would also say that it resembles the Masamoto KS. More info here:

http://www.kitchenknifeforums.com/showthread.php/10171-Torn-between-Sakai-Yusuke-KS-clone-and-Konosuke-Funayuki-Gyuto?highlight=funayuki

And here:

http://www.kitchenknifeforums.com/showthread.php/12266-Konosuke-Funayuki-Gyuto-270mm-review?highlight=funayuki

labor of love
05-27-2013, 09:18 PM
I've own(ed) them both, the difference in spine thickness is undetectable without measuring. Even still, I would expect a lot if variance from knife to knife within the same series.

greasedbullet
05-27-2013, 10:10 PM
I have the kono funayuki and my Sous Chef has the Kono gyuto and we held them side by side trying to figure out the differences, couldn't find many. Granted mine is brand new and his has been sharpened several times so that may have made the profiles more similar, but the only real difference we could see was the profile of the spine was different, the cutting edges were very similar. Both are great knives. YMMV.

tk59
05-27-2013, 10:51 PM
The Funayaki is listed as 2.44mm and the HD2 as 2.1mm, in regards to their thickness.You don't seriously think Mark or anyone else measures every knife to 2.44 mm. I would say 0.3 ish mm is within tolerance. He probably picked out the first knife in the box and published the measurements straight away.

bkultra
05-27-2013, 11:00 PM
Very true, but in my defense I said "slightly" :evilgrin: