View Full Version : Drillin pin holes, need your help?
06-11-2013, 01:13 PM
I've heard many a recommendation to drill slightly larger holes than the pins you will be using so I was curious, what size drill bit would you recommend for 1/8" and 1/4" pins? Also, if you feel strongly against doing this, what do you recommend to make the fitting of the handle together to go easier?
06-11-2013, 01:16 PM
1/8" = wire size 30 or 29 drill bit
1/4 = Letter size drill F
Hope this helps.
06-11-2013, 01:34 PM
Thank you very much!
06-11-2013, 02:35 PM
Happy to help. I know when I figured this out it made life alot easier and knife making even more fun! Sanding down every pin to size can be a pain.
Powered by vBulletin® Version 4.1.8 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.