PDA

View Full Version : Hinoura's Son



Tosho
02-25-2014, 02:57 PM
Another package this morning.
We have been working with Tsukasa Hinoura's son since last August to produce these knives.
They are stainless clad White #2 with yew wood or ebony handles.
These are 240mm and 210mm ( both of these knives have the same heel height of 50mm)
We are still waiting for 150, 180 and 210 Pettys and some 180 Bunka.
2239022391

CPD
02-25-2014, 03:43 PM
Those like nice with the ebony handles. Very curious to see what the Bunka looks like when it comes in.

kiefer
02-27-2014, 11:28 AM
Beautiful knives!
I'm cannot find them on the website though under Hinoura. Are they listed elsewhere?

Tosho
02-27-2014, 12:08 PM
We are putting them us right now, they should be up in the next hour

Tosho
02-27-2014, 12:53 PM
Here are the links
https://toshoknifearts.com/shop/knives/mitsumi-hinoura-gyuto-stainless-clad-white2-210-mm-yew
https://toshoknifearts.com/shop/knives/mitsumi-hinoura-gyuto-stainless-clad-white2-240-mm-yew

Asteger
02-27-2014, 02:01 PM
Hi Tosho ... or Ivan?

But what are these called? I can read some kanji but the photos are too small to make things out. What name are these sold under?

Ebony and ishii - nice wood for handles. Good idea.

Tosho
02-27-2014, 06:41 PM
Hi Asteger, these knives are sold under Mitsumi Hinoura's name however the Kanji reads "Made for Kaneshige" because the handles were put on by Konosuke Sakai/Kaneshige

Mateyhv
03-06-2014, 08:44 PM
Hi, could you post some measures of the 240 please. I can't find the ebony handle from the picture above, have they been sold? Thanks

Tosho
03-06-2014, 10:46 PM
I'll post some measurements in the morning (thickness of 2 spots along the spine, heel height and edge length) the ebony 210 has been sold but the 240 is still up. We only received one however so we're not going to up it up on the website. Send us a PM if you are interested