View Full Version : Anybody here who is good with a graphics program?
03-10-2011, 08:17 PM
I am terrible at drawing things and feel I don't have the time to get into learning a graphics program right now, so I was wondering if anybody here could help me out with a some drawings. I just want to add a few drawings to my website of how the handles are constructed, what parts to measure if you want a custom handle etc. I could probably do something amateurishly with Google Sketchup etc. but it should be a breeze for someone who has worked with programs like this before.
03-12-2011, 01:58 PM
Do you want a completely rendered drawing, or a picture that shows where to measure your knife?
03-12-2011, 02:41 PM
For example, you could use a picture like this and show where people need to measure their current knife:
Just replace the actual measurements with like "A - Length" and then a form to fill out all the required measurements.
What measurements do you need?
Overall Handle Length
Height x Width (at ferrule)
Height x Width (at end)
Other helpful info if they can provide it:
Knife Type, Length, Weight
Original Handle Weight
ChrisBelgium did some nice renders here:
03-12-2011, 03:31 PM
Thanks, that woud be a great start. If you look at my webste and scroll down this page http://www.skeller.info/handles/test/?page_id=13 you can see the picture I borrowed from Gator where I have colored lines to show the measurements I need. My hope was that one could somehow get that into a 3-D picture that one can rotate to see the thing better. Of course, I could just take a number of pictures from different angles... I also want two pictures that show the inside construction of my handles ebcause it is different from the traditional burn-in Japanese handle.
03-12-2011, 11:21 PM
I work in a 3D program called lightwave. Here is a link to my 3D flickr set that has some examples of 3D stuff that I have done. If you send me an email with a little more detail on what you are needing I might be able to put something together.
03-13-2011, 12:20 AM
Steve, I sent you a PM, thanks.
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.