PDA

View Full Version : Starting 3/13/11



The BoardSMITH
03-12-2011, 06:18 PM
I will be offering a 10% discount through 3/19/11 to any poster here on KKF for St Patricks day. (Yes, I'm of Scotch/Irish descent and I have the family tree that goes back to Ireland in 1758)

To get the discount, go through the ordering process on the web site and enter "KKF" in the comments section. I will refund 10% of the purchase price for the board. This will be good for all the stock sizes as well as for any special orders.

Dublinia123
03-12-2011, 07:24 PM
I will be offering a 10% discount through 3/19/11 to any poster here on KKF for St Patricks day. (Yes, I'm of Scotch/Irish descent and I have the family tree that goes back to Ireland in 1758)



Aha !! ;)

I knew there was a good reason I liked your work so much!

What part of Ireland - and how did you go about tracing back that far?

Most of the records here are very sketchy, hard to find and only recorded / available in written form.

The BoardSMITH
03-12-2011, 09:21 PM
There were three brother with the surname Stevenson. One was a sailor, he came to the US and the other two remained in Ireland. I don't know what part of Ireland they were from. The family tree I have is hand written and shows them as the start.

My Dads family was from the foothills of NC and that area was settled mainly by Scotch and Irish immigrants. Not sure where mothers family originated.

BTW My deceased mother hated me bring this up around her. Her family was from Alamance county in NC. My middle name, an old family name, is the same as Jessy James middle name. His family also originated in Alamance county NC and moved west. Coincidence?

StephanFowler
03-13-2011, 01:58 AM
sold

I was planning to order something in the next couple weeks, but this I will have to jump on.

Dave Martell
03-13-2011, 10:57 AM
Very cool offer David! :cool:

WildBoar
03-13-2011, 02:26 PM
That's really nice of you, David!

FryBoy
03-13-2011, 02:30 PM
Is this retroactive???? :D

The BoardSMITH
03-13-2011, 04:08 PM
Is this retroactive???? :D

I hate to ask....How far back? Maybe 3/12/11?

mhlee
03-14-2011, 01:17 PM
David:

I noticed that you offer boards without rubber feet so that both sides can be used. Can you explain some pros and cons of using both sides?

Also, if your boards ever happen to warp or become uneven (which, from what I've read, has not happened), do you offer a service to refinish or flatten your boards?

Thanks.

Michael

mainaman
03-14-2011, 04:59 PM
I just ordered one but paypal did not show comments field, is it possible to get the discount still?

The BoardSMITH
03-14-2011, 06:01 PM
mhlee - Pros and cons of the rubber tipped feet. They add stability to the board and keep it from moving during use. The last thing you guys want while using those "scary sharp" edges would be a board you had to chase. They add shock absorption when chopping, air circulation underneath the board to help prevent warps and they are high enough to allow for an easy handhold when moving. I also add the wooden holders to give it a higher end look rather than just attaching them to the bottom of the board.

I have refinished boards in the past for some customers. When they leave the shop I make them look as much like new as I can. Once the boards leave the shop I rarely hear from my customers unless there is a problem. There may be some warping issues I haven't heard about so I can't say for sure if that has happened or not.

I do know of two though. One poster on KF who had a board for several weeks put his in the sink and ran hot water over it for 5 minutes and expected me to replace it. It arched up like a mad cat and had mildew on it. He ended up giving it to his mother. The other one was a 24 x 36 maple board with no feet that sat in a drop or two of water. The end lifted up like a ski jump but eventually came almost all the way down.

mainaman - I will take care of the discount tonight.

mainaman
03-14-2011, 06:58 PM
Thanks David, I have been holding for a very very long time on a good board, but now I could not pass.

dakiyama
03-15-2011, 10:13 AM
David,

I ordered a maple board from you on 3/13/11 before I saw this thread. Any chance I can get the discount too? No worries if it's too late. They are a great deal with or without the discount.

Thanks,
David

The BoardSMITH
03-15-2011, 05:57 PM
David,

I ordered a maple board from you on 3/13/11 before I saw this thread. Any chance I can get the discount too?

More than happy to honor the discount. Just took care of it.

dakiyama
03-16-2011, 01:39 AM
Thanks David! Can't wait to welcome another one of your boards to the family. It's such a pleasure to be use an object made with such obvious care on a daily basis.

chuck239
03-16-2011, 05:42 AM
David,

Thanks for this sweet sale. I have bee thinking about buying a board from you for a long time but have been moving quite a bit. This sale made me say screw it and just buy a board. Now I need to figure out if its going to fit in my apartment... Well, i have been thinking about moving... hmm

-Chuck

mhlee
03-17-2011, 12:16 PM
Thanks for the info David. Do you have all of the woods in stock except for Mahogany?