PDA

View Full Version : New Petties in the works.



Mike Davis
12-08-2011, 03:02 AM
This is an idea that has been in the works for a while now. I am doing some petties in the 130-210 range. Have a few that will be ready by the weekend, and will be available on my website.
http://i30.photobucket.com/albums/c303/munky2/2011-12-07_22-19-33_391.jpg
Here is the one i did for the Bladeforums christmas KITH. The ones i have upcoming will have a few in mono steel and also a few in damascus :)

Thanks for looking
Mike

add
12-08-2011, 09:27 PM
Nice work Mike.

IMHO, just a perfect profile for a petty in those lengths...

Mike Davis
12-08-2011, 10:51 PM
Thanks! I have a few in mono steel, a few in damascus, and maybe a really thick one in a san mai...Still working the thoughts on that one, as the san mai is pretty thick(1/4" i think). I have one of these in my kitchen i have been using everyday for almost a year...takes a wicked edge and cuts forever.

Eamon Burke
12-09-2011, 01:25 AM
Can't see that one.

Mike Davis
12-09-2011, 01:30 AM
Pic not working?

Eamon Burke
12-09-2011, 01:31 AM
OH it is now. I guess my compy had a cpu-fart.

Mike Davis
12-09-2011, 01:33 AM
LOL! Ok cool.

Mike Davis
12-12-2011, 03:24 AM
Ok so i have a few blades done, but cannot decide what wood to us to go with them....Any suggestions? Pics are down below.
Ok, First one is a 150mm made from Deker's Basketweave pattern.
http://i30.photobucket.com/albums/c303/munky2/2011-12-12_03-08-01_820-1.jpg

Second one is a 180mm made from Delbert's Lizard pattern
http://i30.photobucket.com/albums/c303/munky2/2011-12-12_03-08-14_950-1.jpg

And here...Is a couple pieces of wood i am considering....
http://i30.photobucket.com/albums/c303/munky2/2011-12-12_02-02-49_249.jpg

What do you guys think?

Mike

welshstar
12-12-2011, 04:11 AM
Top row 4th from the left

It mimics the blade finish perfectly

kalaeb
12-12-2011, 07:39 AM
Hmm, redwood pin wood Burl on the bottom for the lizard
And maple Burl top row third column for the other.

tk59
12-12-2011, 09:55 PM
These profiles look great, Mike. What else can you tell us about these blades? I'm afraid I won't be much use on the handle materials though, lol. What's the long block on the right and what color is it?

Mike Davis
12-12-2011, 10:15 PM
Ok here we go. The 180 is Delberts lizard pattern, in O1/L6/Pure Nickel. It is at 2.3 mm at the spine. It has a partial grind to a zero edge. Both should be in the 61rc range. The 150 is made from Deker's basketweave, is 1084/15N20, ground very similar to the first. The long block is Buckeye Burl..It is pretty much gray with black streaks. None of the usual yellows associated with the buckeye.

Dave Martell
12-12-2011, 10:40 PM
That lizard damascus is super cool - I never saw that before - Delbert's holding out on us.

JohnnyChance
12-13-2011, 02:37 AM
That lizard damascus is super cool - I never saw that before - Delbert's holding out on us.

I'm pretty sure he had a piece of it at ECG.

tk59
12-13-2011, 07:04 PM
The only problem with that stuff is the pure nickel. In my experience, it really doesn't hold up anywhere near as well as steel does.

Hattorichop
12-13-2011, 07:43 PM
That lizard damascus is amazing.

I'd love to see a made out of it.

bcrano
12-14-2011, 10:52 AM
1+ on the redwood!

Mike Davis
12-14-2011, 12:27 PM
I already have the redwood cut for it lol. The 150 is getting maple burl, copper and blackwood. I have a special "dark" handle in mind for the other 180...I iwll show them off later tonight.

Dave Martell
12-14-2011, 06:31 PM
I'm pretty sure he had a piece of it at ECG.

He did? Hmmmm

Mike Davis
12-15-2011, 12:55 AM
I am pretty sure that was the bar he had there lol.

Mike Davis
12-15-2011, 03:39 AM
Ok...here are the blades all done.
http://i30.photobucket.com/albums/c303/munky2/2011-12-15_00-19-55_542-1.jpg
Now...Handles are in descending order.
180 Spider petty:Buckeye burl/african blackwood with copper/antler/copper spacers 130mm
http://i30.photobucket.com/albums/c303/munky2/2011-12-15_00-00-03_282.jpg
180 Lizard petty: Redwood pin burl/african blackwood with red fiber/copper/red fiber spacers 130mm
http://i30.photobucket.com/albums/c303/munky2/2011-12-14_23-56-38_385.jpg
150 Basketweave petty: Spalted maple burl/african blackwood with red fiber spacer 128mm
http://i30.photobucket.com/albums/c303/munky2/2011-12-15_00-01-53_140.jpg

I am hoping to have these all mounted tomorrow...With luck anyway lol
Mike

bcrano
12-15-2011, 03:58 AM
They look super Mike can't wait to see that lizard in particular!

tk59
12-15-2011, 12:30 PM
I like the wood selections quite a bit. I'll be interested to see how the spacers work out.

kalaeb
12-15-2011, 01:39 PM
Love the use of copper accents. Can't wait to see how the antler polishes up. I have some, but was not sure how it would work out.

WillC
12-19-2011, 06:38 AM
Very nice sleek profiles. Mmm looking forward to seeing these finished.:biggrin:

Mike Davis
12-22-2011, 02:01 AM
Got one finished and sold tonight, other hopefully tomorrow...Been a lot going on with very little shop time these last 2weeks.
http://i30.photobucket.com/albums/c303/munky2/2011-12-22_00-07-42_913.jpg
http://i30.photobucket.com/albums/c303/munky2/2011-12-22_00-06-58_709.jpg
http://i30.photobucket.com/albums/c303/munky2/2011-12-22_00-06-48_528.jpg

Mike

jmforge
12-22-2011, 10:56 AM
Nice!

HHH Knives
12-30-2011, 06:59 PM
Mike, That looks awesome. Great handle combination and nice lines on the blade profile! Cant wait to see the next couple!