View Full Version : Immersion circulators
02-26-2012, 06:01 PM
Just wondering if anyone here has built their own immersion circulator?
Looks solid but I'm wondering that I'll end up having to buy a polyscience one anyways for some reason.
02-26-2012, 06:07 PM
I was wanting to make one of these a few years ago. There was one the seemed more elaborate and more $$ to make. This seems like a cool thing to try.
02-26-2012, 06:15 PM
No, but an immediate improvement I can think of having read the article is to incorporate a water sensitive switch so that the machine won't heat up unless the switch is submerged
02-26-2012, 07:30 PM
I built that about a couple years ago. It works like a champ, and it's not all that hard to do. Reading through the comments was really helpful. Mine cost more because I bought better parts and also stuck an outlet on the box so I can plug in the probe and the pump/heaters, making them easy to replace if necessary. I'd recommend using an aquarium bubbler for the circulation - I've had the fountain pumps fail in higher water temperatures. I also used an electric SSR and put in a heatsink (the relay gets pretty hot) which added a bit to the cost but should improve longevity.
02-26-2012, 07:56 PM
Do you still use it? How often does it get used?
02-26-2012, 09:51 PM
What temps do these things need to hold at?
Why can't you just use aquarium equipment and an oversized heater?
02-27-2012, 07:43 AM
I use it every now and then, not as much anymore because I don't have as much free time. It is very useful for pasteurizing eggs though, and for making perfect eggs.
I regularly get temperatures up to 140 degrees, sometimes 160s for short ribs. I initially tried aquarium heaters which I wired to be always on, but they could get up only to 100 or so. Not nearly hot enough.
Powered by vBulletin® Version 4.2.2 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.