PDA

View Full Version : Black Sycamore



Burl Source
04-02-2012, 10:39 PM
I thought I would take a gamble and have some of the Sycamore dyed black.
This is the first one I cleaned up. Every piece will look different but I am encouraged so far.
Good? Bad?
I like it. But I would like to hear what you guys think.
Saturday I will do a drawing and give this piece away.

http://i901.photobucket.com/albums/ac219/burlsource/mar12/s004.jpghttp://i901.photobucket.com/albums/ac219/burlsource/mar12/s003.jpg

SpikeC
04-02-2012, 10:43 PM
Very cool!

DarrenSwerid
04-02-2012, 10:51 PM
I like it! But I love black.

The hekler
04-02-2012, 11:18 PM
I like it... Maybe not enough for a full wa handle but I think as scales on a western with nice pins and an offsetting liner they would look great!

PierreRodrigue
04-02-2012, 11:40 PM
+1 For a wa, its lost too much of what that particular wood has to offer, With pins and spacers/liners it wold be nice.

WildBoar
04-02-2012, 11:50 PM
I could see this making some really cool handles.

Mike Davis
04-03-2012, 12:23 AM
I think it is awesome! I am appreciating the dark woods more and more lately. It almost reminds me of a surface charred curly maple or koa.

MadMel
04-03-2012, 06:41 AM
I like it! But I love black.

+1

Taz575
04-03-2012, 03:15 PM
How bout as a bolster/ferrule material?

Burl Source
04-07-2012, 02:07 PM
Winning post is #2
Spike wins the Black Sycamore
Congratulations

Eamon Burke
04-07-2012, 02:19 PM
lololol this was a drawing? Blast!

Congrats, Spike, glad its in good hands.

SpikeC
04-07-2012, 02:40 PM
Yee haw! thanks mark! I have a Suji-ish blade on my bench now that I have been trying to decide on wood for, and this will be perfect! I just carved a wax for the bolster and I think that I will cast in a white alloy to go with the black. Maybe add an ivory spacer in there as well!

Burl Source
04-07-2012, 07:39 PM
I cleaned up some of the other Black pieces.
http://i901.photobucket.com/albums/ac219/burlsource/mar12/q004.jpg

Burl Source
04-07-2012, 07:54 PM
Some of these pieces are already spoken for but I wanted to show them anyways.
This is some maple dyed black. Dying wood you never know what you are going to get until after they are all done.
http://i901.photobucket.com/albums/ac219/burlsource/mar12/q005.jpg

DarrenSwerid
04-07-2012, 08:01 PM
I am digging that black dyed maple. I need to use up the rest of my stash before I can buy some new stuff.

SpikeC
04-07-2012, 09:09 PM
This is what it will go on:

https://lh3.googleusercontent.com/-1qb6wA8EbTk/T4CR8FQCgpI/AAAAAAAAAes/g4gE-8_2gW4/s640/IMG_2686.JPG

Burl Source
04-07-2012, 10:10 PM
59285929

Andrew H
04-08-2012, 12:36 AM
59285929

Wow.

Johnny.B.Good
04-08-2012, 01:44 AM
59285929

I hope one of these is for me Mark!

Burl Source
04-08-2012, 02:02 PM
The koa blocks are spoken for.
They were posted in the wrong place and I thought that was OK because nobody was looking at this thread.

There is more really good koa coming soon.

SpikeC
04-21-2012, 09:22 PM
This piece of sycamore is now a handle, it has some odd characteristics compared to other stabilized wood that I have used. It is really poreous, most of the surface doesn't seem to have absorbed the stabilizing material. This gives it texture, but the surface Needs to be sealed. I put some boiled linseed oil on it and it drank it up like crazy. If I can get the oil to cure I think some more finish is going to be needed.

Taz575
04-22-2012, 12:05 AM
Hmmm. Maybe the stabilizing only coated the cell walls instead of fully filling them??

Burl Source
04-22-2012, 03:53 PM
I would sure like to see some photos of what you are talking about.
Something for everyone to bear in mind. If you are going to use an oil finish on any wood that is spalted or porous you will want to use an oil blend like tung oil or danish oil. These will build up a surface finish. Boiled linseed oil is more of a penetrating oil. Good for making the grain and figure stand out.
You can still use one of these oil blends over the linseed oil.

hax9215
04-25-2012, 07:16 PM
What is avaialable of the dyed black maple? I have a couple of cleavers I want to re-handle, and my last name is Gray!!!

Hax the Cook CLEAVERS RULE!!! :D

Burl Source
04-25-2012, 09:39 PM
What is avaialable of the dyed black maple? I have a couple of cleavers I want to re-handle, and my last name is Gray!!!

Hax the Cook CLEAVERS RULE!!! :D

Last I looked in the webstore there were a few nice pieces of maple dyed black and stabilized.
This link will take you to the maple section of the store. (http://www.burlsource.us/servlet/the-Stabilized-Knife-Handle-Wood-cln-Maple/Categories)