PDA

View Full Version : Stuff



JKerr
05-06-2012, 08:06 AM
Condensing and adding a few items:


First up is my Hattori FH cleaver. Had this for about 6 months, give or take. Used it work so it has some light wear, most of my knives are on constant rotation so this was getting swapped out with my Sugimoto 6 and cm gyuto. It's pretty heavy at 500g, but it really is a "slicing" cleaver, super thin behind the edge. Paid $390 for it, asking $280 USD.
686468656866


Next, my sugimoto cm 27. Solid knife, about 220g, large handle, decent finish, spines a little sharp, choil is slightly smoothed on the right. Black of knife is flat (a la A-type gyuto). This was my main knife for about 5-6 months so it's been sharpened quite a few times and so it could probably use a little thinning to bring it back to full potential. Front and back are a little scuffed from sharpening and the ferrule is a little scratched. Length comes up a bit short. I don't have anything to measure it with, but from memory, it's closer to 26cm. I don't have a lot to compare it to steel wise, it can get sharp, holds it's edge better than the Hattori FH and can take a more acute angle IMO, I like it. As mentioned, it's not a laser, roughly 2.7mm at the heel with little taper until the last third. Bit of belly on it too, tip finishes fairly high compared to others out there. Paid $245, asking $160 USD.
686768686869


Next, Takeshi Saji 27cm VG-10 gyuto w/ stag handle. Hesitant to sell this knife, but I just don't use it enough to warrant keeping it, and my tastes have shifted away from damascus and "bling". Again, about 1.5 years old. Pretty much only used at home, used it a few time sin the kitchen at my last job, i feel it's too thin to be a primary in a commercial kitchen which is why it rarely got used, unless I had a lot of onions to cut. I spoke with Koki before ordering this, enquiring about the Saji range and he mentioned he had one 27cm gyuto which is was 2.2mm at the heel and about 280g (regular range were 2.4 and 370g) so I snapped it up. Thinnest knife I've every used, but still a decent amount of heft, mainly from the handle so if you like blade heavy knives, probably not for you. Flat profile, tip is awesome but could probably be rounded a little at the heel (find it's a little clunky at times), handle is very comfy IMO, narrow but tall. I've smoothed the damascus out with micro mesh pads as it was too rough before and causing drag, cuts very well now. Steel feels similar to hattori's FH series. Paid $350, asking $260 USD.
687068716872

Next, Ikkanshi Tadatsuna 21cm hon kasumi usuba. About a year old, used a bit, mainly in the house. Sharpened a few times (micro bevel on it) still in excellent condition, saya fits well, no pin for it (wasn't supplied) but holds well with friction. White 2 steel. Paid $250, asking $200USD
687368746875

All items located in Australia, but happy to post anywhere in the world. I'll pay postage. Paypal only please.

Cheers,
Josh

Namaxy
05-06-2012, 10:31 AM
PM sent.

JKerr
05-06-2012, 11:56 AM
Hattori Cleaver sold

schanop
05-07-2012, 01:17 AM
That Tadatsuna Usuba looks like a very good deal, people.

sachem allison
05-07-2012, 03:27 AM
saji i want it, but i can't , no money

JKerr
05-29-2012, 10:06 AM
Some additions and price drops:
Sugimoto CM gyuto now $140
Saji Gyuto now $240
Tadatsuna usuba now $180

Additions (Can link pics so I'm just gonna link to my photo bucket account, hope that's ok)
Shigefusa 24cm usuba, selling as I rarely use it now, it's a shame to let such a knife sit in a drawer and I could put the cash to better use. Still in great condition, saya included, asking $400
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0254.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0255.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0233.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0259.jpg

Next, Shigefusa 21cm mioroshi deba. Again, still in great condition, cutting length is actually about 195mm, no saya with this one unfortunately, asking $300 (pics are from new, it has a patina now and sharpened with a microbevel, I'll try to get some new pics up)
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0199.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0200.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0202.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0203.jpg

Sugimoto HM Hankotsu 14cm, carbon steel (heard speculation that the HM series is white steel, can't say for sure myself, gets sharp though) Sees some use at work, got some patina going on it, plenty of life left, comes with a cheapo synthetic sheath, asking $100.
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0264.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0265.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0266.jpg

Lastly for now, Kanetsune 165 white 2 deba. Nifty little starter deba, nothing fancy but it gets sharp, easy on the stones and comfortable to use. Had this guy for about 2 years I think but only started to use it in the last couple of months. Been on the stones a few times, broken down more poultry with it than fish (nothing larger than baby snapper). Damascus is pretty scuffed on the blade road and the saya has a few scuffs on it too, fits well though, asking $100
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0249.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0250.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0252.jpg
http://s1259.photobucket.com/albums/ii557/Kerr27/?action=view&current=IMAG0253.jpg

As before, paypal only please and I'll pay postage. All prices in USD, and sorry for the crappy pics

Cheers,
Josh

chinacats
05-29-2012, 09:41 PM
Wow! Wish I had some cash...love to score a Shig Deba and that looks like a great deal!

Vertigo
05-29-2012, 11:06 PM
Shigefusa 24cm usuba ... $400

http://1.bp.blogspot.com/_JYM_gxKrz3M/TMqWRIEsFDI/AAAAAAAAAEE/FrrYXvm8q88/s1600/why-god-why1.jpg

:shots:

schanop
05-29-2012, 11:44 PM
Ouch ... usuba lust is growing on me again ...

knyfeknerd
05-30-2012, 01:02 AM
Someone has got to buy this usuba!!!!! This is insane!!!!!!

JMac
05-30-2012, 01:39 AM
pm'd regarding deba

JMac
05-30-2012, 01:43 AM
your box is full:scratchhead:

jm2hill
05-30-2012, 01:46 AM
Someone buy the shigi mioroshi, I want bad.

Maluaka
05-30-2012, 01:50 AM
Shigefusa 24cm usuba\

Respectfully requesting that you pull this down for a couple months until my wife forgets I just spent $500 on a Yanagiba :dazed:

schanop
05-30-2012, 01:51 AM
Someone, make a ransom for that shig usuba :-)

gentlecook
05-30-2012, 01:53 AM
pm'd regarding deba

think i make PM for Shigefusa Deba firs!

but owner is the Master

gentlecook
05-30-2012, 02:50 AM
also my offer - 350$ for Shigefusa mioroshi deba.

sorry for ethics and maybe i dnt know some rules about this..

but , very long ago I want to see the Shige Deba.

schanop
05-30-2012, 03:07 AM
Whoever gets that mioroshi will be happy. I'm more than happy with mine, an excellent performer on smaller fish like saba, aji, sayuri, and few kinds of flat fish we have around here.

ecchef
05-30-2012, 04:00 AM
What the hell...I'll be 1st or 2nd backup on the Shige mioroshi.

gentlecook
05-30-2012, 07:57 AM
What the hell...I'll be 1st or 2nd backup on the Shige mioroshi.

this mioroshi most be superb light and comfortable to use with small hands =)
absolutely dnt like classic heavy Debas..

I think we'll just wait for owners decision..

DaveRossy
05-30-2012, 10:23 AM
I tried to pm but said it was full. is the Ikkanshi Tadatsuna still for sale?

Justin0505
05-30-2012, 11:48 AM
I saw thoes shigs yesterday and had to quietly back away from the pc. Amazing deal.

JKerr
05-30-2012, 12:08 PM
Hey everyone, sorry I haven't been in touch. Long day at work. Just got back, didn't quite expect as much interest.

So the Shigefusa Deba and Usuba have been sold. I've message'd the two buyers to inform them, so if you haven't heard from me, sorry :whistling:

Everything else is still available and I've made some room in my inbox.

Cheers for the interest and patience everyone.

Best regards,
Josh

chazmtb
05-30-2012, 02:18 PM
Darnnnnnnn on the Mioroshi Deba... Oh well I keep telling myself I don't need it...I don't need it.

add
05-30-2012, 02:23 PM
Darnnnnnnn on the Mioroshi Deba... Oh well I keep telling myself I don't need it...I don't need it.

And that works for you?

JKerr
07-09-2012, 12:29 AM
Bump and a small price drop:

Saji gyuto $220
Sugimoto Gyuto $130
Tadatsuna Usuba $170
Kanestsune Deba $90
Hankotsu no longer for sale at this point

Again, paypal only please and I'll pay P+P. Prices in USD.

Cheers,
Josh

Pabloz
07-09-2012, 01:09 AM
Josh,
I'll take the Takeshi Saji 27cm VG-10 gyuto w/ stag handle. PM sent.

Thanks,
PZ

JKerr
07-09-2012, 01:35 AM
Saji gyuto sold to Paul.

Cheers,
Josh

JKerr
07-09-2012, 02:42 AM
Tad usuba spf too.

Cheers,
Josh

JKerr
07-09-2012, 03:53 AM
Tad usuba sold. Just the sugimoto gyuto and kanetsune deba left.

Cheers,
Josh