PDA

View Full Version : Mammoth molar Slabs. FS



HHH Knives
05-10-2012, 02:43 PM
OK, After tons of work and testing Im finally ready to offer you guys the Best of the Best in stabilized mammoth tooth and ivory knife scales and blocks, Ill start off with these. They are fully stabilized and have been flat sanded on both sided to 220Grit. There perfectly flat on both sides.
I want you to know, based on many years of using and buying this material. I can say with certainty. These are the best of the best and largest tooth scales you can buy! let alone find for sale! Dont believe me, Google it. :D

OK so here is the breakdown.. I will measure these from the largest points. and thats the numbers I will use in the descriptions.
I could square them up. But with materials like this. I would prefer leaving whole. Which allows you to be selective in how you lay out your knife handles.. Most of these are large enough to make 2 sets of knife scales. With pieces left over for a set of bolsters or some spacers etc.. Thats the main reason I started down this road. Because I was unhappy with what was available. It always seemed like when I needed a piece for a project, all I could find was pieces that were to small or to thin, or not long enough etc..etc..

I accept normal forms of payment. PayPal Is preferred. Shipping on these will be 5.20 for USA and 15.00 for international.
To purchase. Please post on this thread. and I will contact you. These are posted for sale on a couple other forums. So your post will be how I determine who gets what set.

For instructions on how to cut and sand and drill please see my other post. http://www.kitchenknifeforums.com/showthread.php/6401-Woolly-Mammoth-Molar-Tooth-lt-lt-SUPER-SIZED-gt-gt?p=107019#post107019

Set 5 Measures 6 7/8 X 2 13/16 X 1/4 Asking 150.00
http://i1101.photobucket.com/albums/g428/HHHKnives/Damascus%20billets%20for%20sale/IMG_8784.jpghttp://i1101.photobucket.com/albums/g428/HHHKnives/Damascus%20billets%20for%20sale/IMG_8785.jpg

Please post on this thread to secure your set!

I can fit up to 4 sets in a small flat rate box. package.

Stay tuned, I will be cutting and prepping some Blocks and ferrule pieces and sets.

Thanks

oivind_dahle
05-10-2012, 02:53 PM
dude, one piece handles are much cooler than knife scales. Knife scales are so 1990...

kalaeb
05-10-2012, 03:17 PM
dude, one piece handles are much cooler than knife scales. Knife scales are so 1990...

You are dilusional. Its all about the westerns. Who wants straight flat lines when you can have curves. You of all people should understand how nice curves are. :hula::hula:

HHH Knives
05-10-2012, 05:18 PM
Sets #1 2 and 4 are SOLD.. :) oivind Looks like a few of us are still rockin the 90's!! :)

oivind_dahle
05-10-2012, 05:27 PM
Ice Ice baby...

WildBoar
05-10-2012, 05:28 PM
I'll take #3

HHH Knives
05-10-2012, 05:34 PM
Ice Ice baby...

Bu, buda bum, bum.. bumbuum.. Ice Ice BABY!

HHH Knives
05-10-2012, 05:36 PM
Set 3 SOLD to Dave! Thanks

HHH Knives
05-10-2012, 05:57 PM
Here is a better photo of set 5. :) I just realized how little the picture was of it.

HHH Knives
05-11-2012, 05:53 PM
Dave, I sent out your slabs today.. They should arrive quickly. There is one set left! Set 5..

I will be cutting more next week, and cutting some blocks and pieces for ferules and end caps and spacers. So far I have Mike down for 2 blocks. if anyone wants dibs on some post here what you would like, any special instructions and sizes or shoot me a PM

HHH Knives
05-12-2012, 01:52 AM
Set 5 is now SOLD.. Thanks KKF!

Should have some blocks and more scale sets in the next week or so. :)

mhenry
05-12-2012, 10:56 AM
I would like a couple blocks of ivory for ferrules

RRLOVER
05-12-2012, 07:31 PM
I would like a couple blocks of ivory for ferrules

+ 1 X 2:D

HHH Knives
05-13-2012, 11:42 AM
You guys want Ivory? Or tooth?

I have some very select ivory thats solid and large enough for furrell blocks. But it comes at a premium price.. Let me know and I can cut you some blocks.

HHH Knives
05-14-2012, 09:29 AM
For Sale. :cool2:

Ferrule block of Mammoth IVORY.. The block measures approx. 5 7/8" X 1 3/8 X 1 1/8 Weighs 8.7 oz. Asking $210.00

Pretty solid block. corners on one side have inclusion area.as seen in photos. This should not effect a Wa handle at all and is in the area where you will likely sand away to create your handle. There is a small crack thats been filled and sealed.


Should be able to get at least 3 ferrule blocks.. With material to spare for spacers or inlays etc. Or this is large enough to use as the main part on a handle with a dark wood ferrule and end cap for a really classy looking Wa handle!!

Please post here Ill Take it. or message me Shipping and payment methods are the same as stated in first post above.

Thanks and God Bless.
Randy

HHH Knives
05-15-2012, 10:45 PM
Cutting more mammoth tooth. Should have the pieces that were requested ready by weeks end. Thanks for your patience..

Also very excited about the tooth that will follow this one. Stay tuned!