View Full Version : Soaking times
09-24-2012, 03:55 PM
I just received a bestor 1200, and Rika 5000 from the unnameable. I was wondering what a proper soak time is on these guys. This is my first foray into proper whetstones/sharpening. Any tips and info would be greatly appreciated.
09-24-2012, 04:01 PM
I just leave mine submerged whenever not in use. You can use them after about 30 minutes or so. If while you are using them they are getting dry in a couple minutes, or you can see the water soaking into the stone, they need a longer bath.
Usually the Bestor can soak for a few minutes and then be used with lots of water being added constantly if needed.
09-24-2012, 04:25 PM
If you plan to keep your stones at home just yes soak them forever, I would take a 1/2 GN or 1/3 GN and just keep both together in one water.
Doesnt take too much space either.
09-24-2012, 05:05 PM
Permasoaking is the easiest thing to do, otherwise a 30 minute soak is a good starting point.
09-24-2012, 05:39 PM
Good to know. Thanks guys.
09-24-2012, 10:15 PM
My bester 1200 and beston 500 have been permasoaking since I last moved, a year ago. I change the water at least once a week ( when I do my work knives ) , it's very convenient to just grab the container out of the cupboard and you're ready to go. Although I live in the tropics I've not had any problems with mould so I don't add bleach to the water as some suggest.
09-24-2012, 11:37 PM
Yeah just permasoak those 2.
09-25-2012, 05:39 AM
Permasoak and flatten as you go. I can be stubborn, and I was part of the Carter camp in my views on flattening, but now that I'm honing razors more and more, I'm really noticing how important a flat stone is (stupid, dumb, stupidity, stupid....). I'm sure you know this, but mine got pretty bad, and I spent about 2 hours flattening/chamfering stones, yesterday, when I should have been doing pretty much anything else.
Powered by vBulletin® Version 4.2.2 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.