PDA

View Full Version : Catcheside Cutlery - Knives available.



WillC
11-02-2012, 06:11 AM
Hello All :biggrin:
I thought I had better start a separate thread for finished knives which are available to purchase.
This little lot is ready and all finished. Details for each are on my website.
If your not already on there, click to join my mailing list to hear when extras are available and any special offers, I will have more stock to add shortly in plenty of time for Christmas.
http://www.catchesidecutlery.com/shop.html
http://i798.photobucket.com/albums/yy262/catcheside/IMGP3008-1.jpg

ecchef
11-02-2012, 07:24 AM
Will, you no longer use the "Hereford - England" mark?

Them's some nice knives you got there!

WillC
11-02-2012, 09:08 AM
Thanks Dave, yeah, i had to simlify the logo, to allow for a range of sizes. The tiny writing would not come out clearly on the small logo's.

RobinW
11-02-2012, 11:23 AM
And will the "Hereford - England" work on; well lets say a 250 Funayuki? I kind of like it....

Don Nguyen
11-02-2012, 11:30 AM
Wow, that suji is amazing. Looks like a single bevel.

WillC
11-08-2012, 02:43 PM
Still available, I'll offer a 20% forum discount off any of these 4, thats 20% off the prices listed on my site. Just drop me a pm and i'll send you the discounted total.:)

ChiliPepper
11-10-2012, 05:44 AM
the different levels of finishes on the suji's blade are really a thing of beauty. Rough and elegant at the same time. Impressive.

ecchef
11-10-2012, 07:43 AM
I owe my wife a knife, but I have to wait until after the new year. Not sure how defense budget cuts will affect me. :curse:

WillC
11-28-2012, 12:44 PM
Just the lovely little san mai Suji remaining from that lot.
I've given a nice discount and applied it to the web price.:biggrin:
http://www.catchesidecutlery.com/shop.html

Mrmnms
12-08-2012, 12:17 AM
The pictures don't do your knives justice . Got the little knife today and love it . The handle is beautiful, precise and very comfortable . The knife is outrageously sharp. I'm going to go over your sharpening progression . Going to get a lot of use out of it.

WillC
12-08-2012, 05:23 AM
Thanks Mike, glad you like it, thanks for the pics too.:biggrin:
All this lot now sold, thanks KKF.:bliss:

WillC
12-18-2012, 12:54 PM
Two Knives I have just added to my Store. Full details are now up.
http://www.catchesidecutlery.com/shop.html
The composite damascus Cleaver.
http://i798.photobucket.com/albums/yy262/catcheside/IMGP3247.jpg
And this 150mm truffula petty.
http://i798.photobucket.com/albums/yy262/catcheside/IMGP3324.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMGP3337.jpg
Many Thanks All:biggrin:

Pachowder
12-18-2012, 01:19 PM
When I have no cash Pierre posts a great knife, Marko posts sweet knives, Avis, ealy and now this cleaver! You are all killing me! I must start moving on my being independently wealthy plan. Awesome work Will! I have a catcheside petty and it is an awesome knife and one of only 3 I have and will keep (next to a harner nakiri and ealy gyuto) forever!

WillC
12-18-2012, 01:26 PM
Thanks Mate, I will be updating my order page for the new year to include this design of knife in more modestly priced materials.:biggrin:

quantumcloud509
12-18-2012, 01:34 PM
Thanks Mate, I will be updating my order page for the new year to include this design of knife in more modestly priced materials.:biggrin:

:bliss:

WillC
03-07-2013, 08:46 AM
These 3 Guys here with the new Utility line handles are up in store.:hungry:
http://i798.photobucket.com/albums/yy262/catcheside/IMGP3477_zps90bc83bc.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMGP3476_zpsa2c1b820.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMGP3456_zps7a46fa1d.jpg
http://www.catchesidecutlery.com/shop.html

skiajl6297
03-07-2013, 09:17 AM
Will - the site is still down (according to my attempt at 9:15am EST on 3/7).

WillC
03-07-2013, 09:25 AM
It has been back up since last night. No problems that I can see, do let me know if it continues to not work for you. Or drop me a pm if all else fails for pricing.

jigert
03-07-2013, 09:38 AM
The site seems to work just fine for me. And the new line looks great, Will! If a 210 gyuto will appear in this line, then I think I'll just have snag one.

WillC
03-07-2013, 09:48 AM
Cheers, I'll bear that in mind, as I'll be adding some most weeks, thats the plan anyway.:biggrin:

WillC
03-08-2013, 02:07 PM
The 195mm Petty has sold, thanks:biggrin:

WillC
03-16-2013, 09:30 AM
The Two Gyuto are still available. :biggrin:

WillC
03-21-2013, 02:50 PM
245mm Gyuto Sold.

I have 2 new ones in stainless to add to the Store.

A lovely 210mm Nakiri in special hollow/double bevel
Another 240mm Gyuto
The 270mm is also still available.

I will run a forum special on these up to the end of the weekend and throw in postage and payment fees.

So the 240mm is 240 all in
The 270 mm is 265 all in
The Nakiri is 280 all in

Technology is not playing ball with pictures tonight, but the 240mm is the same as the one on my website, the 270 is up on my site, here is a sneaky pic of the Nakiri, hopefully photobucket will work tomorrow again and I will get some more.

PM Me for this offer as prices will be in full on my site.

1409014091

WillC
03-21-2013, 03:16 PM
240mm Gone!:bigeek:

WillC
03-21-2013, 04:13 PM
270mm Gone :biggrin:

marc4pt0
03-21-2013, 06:26 PM
DOH!!!!!!! Gawd d&$(:;+#!(=+:_!#/++/#&$):/+;)#***~*!!!!!!!!,!!!

WillC
03-22-2013, 07:17 AM
The Nakiri pics and specs are now up on my site.
http://www.catchesidecutlery.com/shop.html
Photobucket has gone badly wrong and just lost me several hours work, not very impressed and no pics in the thread i'm afraid, but they are on my website.
Forum weekend deal price is 280 pm me for this introductory offer.

WillC
03-22-2013, 11:02 AM
Here are the pics.
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0007_zps9025c755.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0011_zpsf98e3897.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0013_zps6ff80090.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0014_zps7527ebe3.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0016_zpsdba84143.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0018_zpse5f8c5a8.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0019_zpsd6c39dcf.jpg
http://i798.photobucket.com/albums/yy262/catcheside/IMG_0020_zpsce53131f.jpg

Burl Source
03-22-2013, 12:33 PM
Great looking Nakiri Will.
Beautiful, yet conservative.
I think you have a winner with the Bubinga/Blackwood combo.

chinacats
03-22-2013, 03:27 PM
Will,

Is that nakiri pretty much the same as the one in the passaround?

Cheers

WillC
03-22-2013, 03:51 PM
Thanks Mark:doublethumbsup:
Chinacats, The pass around knife is a similar grind but the knives are quite different. I would say this is a more traditional Nakiri shape, this is a bigger knife, grinding this one to the spine gave me better control over the geometry. I deliberately made the bevel smaller on this one to accentuate the release. So a few tweaks and improvements. :D

WillC
03-22-2013, 06:48 PM
I could probably put that better....
The pass around knife is the original if you like, the first knife I ground the hollow faces. As such its a little quirky in its shape and it has the Ko finish. Its a personal knife, I think you guys will love it and it tells you what you need to know in use about this geometry. This package is the refined version, largely cosmetic, but it is a bigger overall knife and with a couple of performance tweaks. But the way they cut is very similar. I have a video of this one uploading, It in HD too but it will likely take all night!
Here are the blade specs.
Specifications
Blade length - 214 mm
Handle Length - 142mm
Height over heel - 64mm, halfway 58mm, At tip 47mm
Taper on spine - 3mm - 2.5mm - 1.6mm
Taper at apex of hollow - 1.25 - 1mm - 0.8mm
Balance point 30mm in front of handle.
Weight approx 240 grams.

That should tell you something about the way the blade feels and cuts... Its stiff, zero flex, has weight, yet cuts with very little resistance. I knew it would and it still surprised me:D Video coming up.
And again the Forum only special only the Nakiri left... is on until the end of Sunday...Or when I rise on monday. Free shipping and fees on the web price so 280.
I have some coming up in carbon, but need grinding........

WillC
03-23-2013, 01:52 PM
Nakiri video is now up.
http://www.kitchenknifeforums.com/showthread.php/6363-Catcheside-Cutlery-Video-Gallery?p=192332#post192332

SlapChop
03-23-2013, 04:09 PM
very sexy!

WillC
04-02-2013, 01:17 PM
This amazing Nakiri is still available for purchase now in my Store.
http://www.catchesidecutlery.com/shop.html
Carbon ones coming up....

Igasho
04-02-2013, 02:13 PM
Dude....if that was CAD not Euros my bank account would be empty

WillC
04-02-2013, 02:43 PM
Well its nice to know its pushing some buttons anyway. :)
The price is what it is I'm afraid, so much more work in one of these than a convex ground Gyuto.......I think its very much worth it for the effect.:D

Igasho
04-02-2013, 02:51 PM
Well its nice to know its pushing some buttons anyway. :)
The price is what it is I'm afraid, so much more work in one of these than a convex ground Gyuto.......I think its very much worth it for the effect.:D

I completely respect the price, im just drooling and being wishful in my thinking!

WillC
04-08-2013, 11:36 AM
Quick Early doors on these, before I fix the handles on, sharpen, get some more pictures, and put them in my store....
Catcheside Gyuto's with the Utility handle, These in glorious carbon 01 tested to 61hrc.
These are a little thicker than the stainless, only by a shade over the heel, full distal taper, wonderfully convex and very thin at the edge and tip. tested on food they cut and release very nicely.

http://i798.photobucket.com/albums/yy262/catcheside/20130408_154202_zpsa16965ae.jpg

The 270mm 58mm at the heel - 275 all in.
The 240mm 54mm at the heel - 245 all in.
The 210mm 48mm at the heel - 205 all in.

And these two guys, in Stainless clad carbon core, (01).

http://i798.photobucket.com/albums/yy262/catcheside/20130408_154410_zpsdbb1295d.jpg

Again very sturdy Knives, Just over 3mm over the heel, with slightly convex distal taper on these, allowing more convex geometry for the mid section of the knife too. So not lasers, but very very thin at the edge and tip, making them cut wonderfully.
These are finished to a nice satin hand rubbed finish and etched.
The handles incorporate Amboyna, Cow horn, with white faux ivory and red spacers.
The balance for both is on the choil.

The logo's came out a bit weak on these, 304 stainless hates being etched it seems. Otherwise I'm very happy with these indeed.

The 240mm - 58mm height - 440
The 200mm - 51mm height - 375

Pm any interest or questions or in the thread.

Many Thanks:)

Will

marc4pt0
04-08-2013, 12:00 PM
ohhhhhhh, those are gorgeous knives Will. Nice work! What's shipping go for these days, say.... to Maryland, US?

WillC
04-08-2013, 12:03 PM
Those prices are all inclusive for you lovely lot.:)

jigert
04-08-2013, 02:20 PM
Great looking knives, Will! Glad they're not stainless this time around. Then I'd have to make a hard decision, since I don't have the money. :)

WillC
04-08-2013, 04:40 PM
Stainless clad carbon core though.....best of both worlds:D

Mike9
04-08-2013, 04:56 PM
Damn brake job . . . . damn, damn, damn. Gorgeous work Will - I seriously need to plant a money bush this year - (I'm not greedy) Hey - need a relic Tele body and neck by any chance? Or maybe a whole custom MoTone Tele, or Strat . . . hey just throwing it out there.

WillC
04-08-2013, 05:55 PM
Mmm If I played I would be very tempted....But really these are my bill payers. Cheers Mike:)

WillC
04-10-2013, 09:41 AM
The carbon Utility line are all now up on my Site as are the Red sharks as i'm calling them in stainless san mai. Lots and lots of detail and geometry shots are up for those who asked. I would have put them in here but photobucket is playing up again.
http://www.catchesidecutlery.com/shop.html
Cheers
Will

WillC
04-10-2013, 11:18 AM
Right trying to not have to use Photobucket
These are the Carbon Catcheside Utility Gyuto detail shots.
14500
14501
14502
14503
14504

WillC
04-10-2013, 11:40 AM
The Red Shark stainless san mai pair....
14521

14522

14523

14524

14525

WillC
04-10-2013, 12:10 PM
The 200mm Red Shark is SOLD:)

chinacats
04-10-2013, 01:11 PM
Congrats on the quick sale! I like the look of the angled heel--seems like I am constantly cutting myself with that part of the blade (just handling not while cutting). Is that something new for you?

WillC
04-10-2013, 01:33 PM
I do mostly take a little notch out of the heel there to stop it catching on flesh, but not usually so much as that. The 304l/01 combination is very particular the way it needs to be forged and prepared for heat treatment, or the cladding will rip the core in two, so that was another fail safe as I have seen a split core start from that vulnerable point on failed pieces.
After it has been tempered its quite stable. But I have several dramatically failed pieces to show what can go wrong at almost every stage:D Another reason why I am particularly pleased with these, because I got it to work eventually.....:D

WillC
04-11-2013, 05:42 AM
The Red Shark 240mm is SPF, thanks KKF:biggrin:

Still available in the Catche'store are

210 carbon Gyuto, Utility line handle - 215
240 Carbon Gyuto, Utility line handle- 245
270 Carbon Gyuto, Utility Line handle- 275

Also the fabulous Stainless special grind Nakiri, I will continue the offer on that for KKF at 280 via pm only.

WillC
04-15-2013, 07:47 AM
Both the Red Sharks now sold and shipped.

Still available are
210 carbon Gyuto, Utility line handle - 215
240 Carbon Gyuto, Utility line handle- 245
270 Carbon Gyuto, Utility Line handle- 275

Also the Stainless Nakiri. 280 via pm only.

Above prices include shipping and payment fees.

I believe these knives offer superb value for money for the time are care put into the heat treatment and grind. Each and every knife is tested with the final thinning being done by hand assuring the best possible geometry right into the thin edge. This is the same process as for my custom knives.

Von blewitt
04-15-2013, 07:57 AM
I can't believe these haven't sold yet! That 270mm Gyuto looks awesome!

WillC
04-15-2013, 10:02 AM
Thanks Mate :biggrin:

WillC
04-16-2013, 01:05 PM
Ok lets shake some life into this. These are superb knives and they want to be out there being used.
Its my birthday next monday and I am off on a break along the welsh coast on my aging honda cbr 400 for the week. So a little holiday bonus would be most welcome and to pay some bills before I go away.


So I will offer the next two to sell of the knives currently listed on my site at a %20 discount. For the Nakiri the 20% is off the forum offer price. I really want to see these knives out there being used and talked about. Pm me for this offer and I will give you the total and my paypal details.

So this is valid for any of the 3 carbon utility or the stainless Nakiri. But only the first two to sell. This is valid until monday 22nd, (my birthday):D

ejd53
04-16-2013, 01:26 PM
PM sent on 210

WillC
04-16-2013, 02:06 PM
Hang on Guys had a little wave of pm's there. I will just confirm which knife/knives the first wants. Ejd, I will get back to you shortly.

marc4pt0
04-16-2013, 09:19 PM
240 or 270 still available?

WillC
04-17-2013, 02:05 AM
OK fellas, EJd gets the 210mm and Marc gets the 240mm, pending payment, I will send you details.
Many Thanks Guys, I will post a picture of me with my Bike eating a fish on the beach next week for you in gratitude:biggrin:

ejd53
04-18-2013, 02:30 PM
The 200 Redshark got here yesterday, safe and sound. It is beautiful!!!:bliss:

WillC
04-18-2013, 04:44 PM
Thanks Ed, thats great, glad it got the safe and sound.:)

ejd53
04-20-2013, 08:19 PM
Finally got a chance to use the 200 Red Shark tonight. What a cutter! :fanning: Goes through potatoes like they are butter and has very good release. What type of grind are you using on them, Will? Whatever it is, it's great. My daughter used it and has since claimed the 210 carbon as her own when it gets here. :knife:

marc4pt0
05-01-2013, 09:34 AM
Stellar knife, Will. This thing is a beast on prep!
Thanks again!

http://i1281.photobucket.com/albums/a520/marc4pt0/Untitled13_zps06b6903c.jpg

WillC
05-01-2013, 11:00 AM
Thanks Guys, Ed, The grind I have come to which works best is basically a blended double bevel, taken very thin at the edge. It ends up being a very robust grind with great release, especially on a thicker knife like yours. The grind appears convex to the eye. If you look at the heel you will see there is an apex to the convex. This is often described as a wave, I find this to give the best release. And as long as the time is taken to get it uber thin at the edge it cuts well too.
I have my processes to make sure a knife cuts food well out of the box. I tend to grind the knife as close as I can get it on belts, test it on food, then do the final thinning by hand on Diamond plates, retest as necessary, then hand finish.
I do it this way as many times I have hand finished a knife, tested it, not been as happy as I could be....so needed to grind a bit more and hand finish all over again:laugh:

Marc, thats fantastic mate, Its a great feeling to have some worker bee knives out there, let me know how it works out in the long term. That Patina is coming already.:)

ejd53
05-01-2013, 11:06 AM
The 210 arrived yesterday. Not sure if I'll be able to give you feedback anytime soon, as my daughter has appropriated it. :doublethumbsup:

WillC
05-09-2013, 12:15 PM
There is still the 270mm carbon Utilty line left. And the wonderful special grind stainless Nakiri. I had better have a post holiday sale and offer 20% off the web price on these to you guys here by pm.
Pictures and specs here...
http://www.catchesidecutlery.com/shop.html
Thanks All:biggrin:

marc4pt0
05-09-2013, 01:19 PM
I love that profile of the 270. And I was really enjoying the 240, can't wait to get back in to the kitchen to use it again!

WillC
05-09-2013, 01:21 PM
Cheers Marc, great to hear:biggrin:

ejd53
05-09-2013, 02:18 PM
PM on the Nakiri.

WillC
05-09-2013, 03:31 PM
Fabulous Nakiri Sold to Ed. I'm so happy you are buying so many of my knives Ed, thank you.:biggrin:

Mrmnms
05-09-2013, 08:05 PM
Congratulations to Will and Ed!

WillC
05-10-2013, 03:19 AM
Thanks buddy, 270mm carbon is also now sold.
Many Thanks
Will

WillC
05-24-2013, 02:54 PM
I have a stainless Utility Line available. This one was damaged on the way to the customer. The customer has changed his order to a damascus knife, so this is available. It lost 1mm off the Tip and has been re thinned and finished. Its still 240mm in length 49mm depth. Utilty line handle. Superb cutter.
I will do the 20% discount and a bit more on this one so be quick.... 230 all in, will include a nice Knife Mat to wrap it in and Knife certificate.
Pm me on this one and I'll send you the details

Many Thanks All
Will
Quick snaps, Usual geometry
http://i798.photobucket.com/albums/yy262/catcheside/20130524_193958_zps175bbede.jpg (http://s798.photobucket.com/user/catcheside/media/20130524_193958_zps175bbede.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/20130524_194016_zpsd631c684.jpg (http://s798.photobucket.com/user/catcheside/media/20130524_194016_zpsd631c684.jpg.html)

Flee
05-24-2013, 04:38 PM
Pm on the utility knife.

marc4pt0
05-24-2013, 04:47 PM
Good choice Flee! I almost jumped on this and I already have his 240 in carbon. You are definitely going to enjoy this knife!

WillC
05-24-2013, 05:18 PM
Well done Flee sold pending.

ejd53
05-24-2013, 05:45 PM
Nice job Flee. I have a 210 carbon and a 200 San Mai, both great cutters.

ecchef
05-24-2013, 09:52 PM
Great score! Will makes outstanding knives. And he's a nice guy. :)

Bill13
05-26-2013, 05:08 PM
Lucky grab. I would of snatched that up if I had seen it in time!

WillC
06-02-2013, 08:19 AM
This Guy is available. It is a full custom Gyuto in 14c28n with no wait. The customer is having something else from me.
Specs are.
Blade length 270mm
Height 52 mm
14c28n at 62hrc
Handle is is Koa and Amboyna.
Balance is on the choil.

Price is 360 all in via pm, I will add it to my site in the next few days.

3mm at spine, full distal taper. convex faces, hand thinned into edge and tip prior to hand finish.

Many Thanks

Will

http://i798.photobucket.com/albums/yy262/catcheside/Mono%20stainless/IMGP3582_zpsc98ceccb.jpg (http://s798.photobucket.com/user/catcheside/media/Mono%20stainless/IMGP3582_zpsc98ceccb.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/Mono%20stainless/IMGP3584_zps2c76dd8b.jpg (http://s798.photobucket.com/user/catcheside/media/Mono%20stainless/IMGP3584_zps2c76dd8b.jpg.html)

jigert
06-02-2013, 11:55 AM
If I could swing a 270 in my kitchen... Great looking knife, Will!

WildBoar
06-02-2013, 09:27 PM
Wow.

WillC
06-04-2013, 01:24 PM
Thanks Guys, still here, have not had a chance to put it on my website yet, so if you want it, pm me.
Cheers
Will

cclin
06-04-2013, 01:43 PM
I want to try Will's gyuto & 14c28n steel so bad.....very tempting!!

marc4pt0
06-04-2013, 03:29 PM
If it performs anything like the o1 carbon utility I got, go for it!

ejd53
06-04-2013, 06:03 PM
I have three of Will's knives, a 200 San Mai Gyuto, a 210 O1 carbon Gyuto and a 215 Stainless Nakiri. They all perform beautifully.

WillC
06-06-2013, 07:14 PM
I was about to put both these up for sale.....But the Gyuto has been snapped up:D
So the Suji still available.
The Price 712
Blade specs, stainless clad/01 core with nickel. Core 61hrc.
Both are approximately 3.5mm over the heel, full distal taper. Very...very... thin behind the edge.... whilst nicely convex faces.
The finish is hand rubbed to 600 grit and a light polish and etch.

Handles are stabilized dyed maple and birch. With solid nickel silver ferrule, split with a fullered stainless spacer. Stainless endcap with mosaic pin.
The Gyuto is actually a 240mm, (245)
The Suji a 280mm
Both balance on the heel.

http://i798.photobucket.com/albums/yy262/catcheside/20130606_201705_zps4d1a2c32.jpg (http://s798.photobucket.com/user/catcheside/media/20130606_201705_zps4d1a2c32.jpg.html)

Lots of pics in the gallery. Thanks All

Also the 14c28n custom Gyuto in koa/amboyna still available

Von blewitt
06-06-2013, 07:22 PM
Stunning Will, whoever snapped up that Gyuto is a lucky fella!

WillC
06-06-2013, 08:07 PM
Thanks Huw, all good practice for your one:D
Both the stainless clad knives, sold pending, im a happy bunny, as will be my landlord:bat:

Bill13
06-07-2013, 05:16 PM
This Guy is available. It is a full custom Gyuto in 14c28n with no wait. The customer is having something else from me.
Specs are.
Blade length 270mm
Height 52 mm
14c28n at 62hrc
Handle is is Koa and Amboyna.
Balance is on the choil.

Price is 360 all in via pm, I will add it to my site in the next few days.

3mm at spine, full distal taper. convex faces, hand thinned into edge and tip prior to hand finish.

Many Thanks

Will

http://i798.photobucket.com/albums/yy262/catcheside/Mono%20stainless/IMGP3582_zpsc98ceccb.jpg (http://s798.photobucket.com/user/catcheside/media/Mono%20stainless/IMGP3582_zpsc98ceccb.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/Mono%20stainless/IMGP3584_zps2c76dd8b.jpg (http://s798.photobucket.com/user/catcheside/media/Mono%20stainless/IMGP3584_zps2c76dd8b.jpg.html)

That is a beautiful knife and I think WildBoar should buy it so I can see it in person one of these days:D

WildBoar
06-07-2013, 06:41 PM
I hear you. But it was already sold. Plus I got more then my share of 240s. Now if it were a 255 that would be a different story... :D

ms4awd
06-09-2013, 02:53 PM
Any pettys/pairing available? do u make western handle?

WillC
06-11-2013, 06:33 AM
The 270mm mono stainless Gyuto is still available, nothing else currently available. Cheers
Will

WillC
06-11-2013, 05:47 PM
270 Gyuto now sold, thanks everyone. I will be focusing on catching up big time on commission pieces for a while, but will slip a few extras in here and there. I do have a special grind carbon Nakiri coming up I think I will do with a nice handle.

WillC
06-26-2013, 02:01 PM
Two more available here.

Mono steel carbon Nakiri - special grind - Hollow ground faces, flat bevels stone finished to Zero.
Length 221mm height 65mm
Thickness over heel 3.1mm
Handle is Maple and dyed elder.
Price 455 all in.

http://i798.photobucket.com/albums/yy262/catcheside/20130626_165545_zps25923dc5.jpg (http://s798.photobucket.com/user/catcheside/media/20130626_165545_zps25923dc5.jpg.html)

And this stainless damascus clad carbon core Gyuto.
Blade length 245mm height 51mm
Thickness at heel 3.1mm, full distal taper, my usual grind, fully convex, super thin at the edge.
Handle is spalted horn beam and Maple with dyed elder.

Price 548 all in.

http://i798.photobucket.com/albums/yy262/catcheside/175a96bf-4afc-421c-b5cb-6f65eb6636bf_zps7b5c18fe.jpg (http://s798.photobucket.com/user/catcheside/media/175a96bf-4afc-421c-b5cb-6f65eb6636bf_zps7b5c18fe.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/20130626_170448_zps8bef8e11.jpg (http://s798.photobucket.com/user/catcheside/media/20130626_170448_zps8bef8e11.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/20130626_170458_zps0b8c292a.jpg (http://s798.photobucket.com/user/catcheside/media/20130626_170458_zps0b8c292a.jpg.html)


Pm me any interest they are not on my site yet.

Thanks All:biggrin:

WillC
06-26-2013, 05:05 PM
Nakiri Now sold. :)

Gyuto still currently available.

ejd53
06-26-2013, 05:16 PM
Congrats to whoever bought the Nakiri, they cut like a dream and things do not stick to that grind.

WillC
06-26-2013, 05:35 PM
Thanks Ed, glad your enjoying it:)

turbochef422
06-26-2013, 11:29 PM
Good luck with the sale but you shouldn't need any. That gyuto is beautiful.

chinacats
06-27-2013, 05:08 AM
Good luck with the sale but you shouldn't need any. That gyuto is beautiful.

:plus1: love the damascus on the gyuto

WillC
06-27-2013, 05:48 PM
Thanks Guys, this one is up in my store now.
http://www.catchesidecutlery.com/shop.html

WillC
06-28-2013, 06:42 AM
I have just spent the morning introducing a proper cart/stock management system to the website as it really needed doing as im away from the computer while in the workshop and most weekends. It also allows discount codes.
So I have added one for this knife to try it out. To get a 10% discount on this wonderful stainless damascus clad Gyuto before or over the weekend click to buy then add the discount code 00KKF00

http://www.catchesidecutlery.com/shop.html


:)

marc4pt0
06-28-2013, 07:46 AM
My God man, that knife is beautiful. Wish I had the means! Hats off to the lucky bastard who snatches this up, especially at such a great price!

Lefty
06-28-2013, 05:13 PM
I just received a Catcheside in the mail, for a saya. This thing is flat out INSANE! This should be purchased...now!!!

WillC
07-01-2013, 04:40 AM
Thanks Fellas, looking forward to seeing the saya for the Suji Special Lefty :)
This stainless damascus clad beauty is still available. I will leave the discount code active for you for another two days.:D With the discount thats just over 50 off!
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMGP3620_zpsdd843650.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMGP3620_zpsdd843650.jpg.html)

Brad Gibson
07-01-2013, 05:46 AM
I saw the super flat profiled gyuto that lefty has right now. Dear lord that thing is beautiful. Keep up the hard work. I hope someday I can own a piece of your work!

WillC
07-01-2013, 10:30 AM
Thanks Brad I love making them.:bliss:
The stainless clad Gyuto has sold.
Thanks all
Will

Mike9
07-01-2013, 05:03 PM
You seem to have a problem with your web site Will . . . everything is always SOLD!!! :groucho:

ejd53
07-01-2013, 07:37 PM
You seem to have a problem with your web site Will . . . everything is always SOLD!!! :groucho:

Yeah Will, ask yourself this: do you really need the shop page or should you rename it "knives I used to have for sale"? :biggrin:

WillC
07-02-2013, 12:10 PM
Lols Guys, I need to get more knives made:laugh:

WillC
08-14-2013, 02:50 PM
Hey Guys the first two Parers are up now on my site. Contact me via the contact button for payment details.
http://www.catchesidecutlery.com/shop.html

WillC
08-14-2013, 03:20 PM
One of the first two Parers Left....

cookinstuff
08-14-2013, 11:51 PM
Sent ya an email on that other one if it is still available, these look great.

WillC
08-15-2013, 01:39 AM
Thanks, Koa One is yours ;)

WillC
08-30-2013, 08:39 AM
Available now on my site.

290mm Stainless damascus clad, special Gyuto. Diamond shape handle RH only.
This is the largest full depth Gyuto I have ever produced. This is a very special knife. Stainless damascus clad 01 carbon core. Dark Desert ironwood burl handle with stainless damascus fittings, also a first for me. The damascus is set off by a Jadeite spacer. The handle is unusually in my diamond shape, my version of a D handle. Set for right hand use. The knife is of my usual geometry, thin in the right places.
Dimensions
Blade length 291mm
Height at heel 59mm
Handle length 15 cm
Blade thickness over heel 3.75mm, full distal taper over length.
Balance point on choil.
Weight approx 350 grams.
Price includes shipping and fees.
Link to Purchase
http://www.catchesidecutlery.com/shop.html
Pictures
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3748_zpsa1b1273d.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3748_zpsa1b1273d.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3749_zps0422e2a6.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3749_zps0422e2a6.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3750_zps61cd0f06.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3750_zps61cd0f06.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3752_zps913f140c.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3752_zps913f140c.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3753_zps7685e466.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3753_zps7685e466.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3754_zps1a6bad78.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3754_zps1a6bad78.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3757_zpsaf48f0ee.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3757_zpsaf48f0ee.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/shop/IMGP3763_zpsedb9b514.jpg (http://s798.photobucket.com/user/catcheside/media/shop/IMGP3763_zpsedb9b514.jpg.html)
Thanks all, have a lovely weekend;)

skiajl6297
08-30-2013, 08:55 AM
Dude. That thing is spectacular.

WillC
08-30-2013, 10:26 AM
Thank you sir, And this one is sold.:)

Lefty
08-30-2013, 11:18 AM
You keep making my knives backwards, Will....

ejd53
08-30-2013, 11:37 AM
Still need to change the page name on your website to "Knives I used to have for Sale"...

JMJones
08-30-2013, 12:13 PM
That is impressive and inspiring work!

Aphex
08-30-2013, 03:20 PM
My god, is that a sword or a knife! It's almost as long as my kitchen is wide.

Congrats on such a quick sale.

scotchef38
08-30-2013, 06:38 PM
Thats a monster.Amazing work as always Will.

ar11
08-31-2013, 07:51 PM
That gyuto is truly impressive craftsmanship. Maybe if I save for a long time i can afford one of your beauties one day

WillC
10-26-2013, 03:39 PM
A little heads up, Some stainless damascus Paring knives and two stainless clad Gyuto are available now in store.
http://www.catchesidecutlery.com/shop.html
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0023_zpsd21ff86f.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0023_zpsd21ff86f.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0032_zpsd086198a.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0032_zpsd086198a.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0034_zps64284b3d.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0034_zps64284b3d.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0039_zps8f7d058f.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0039_zps8f7d058f.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0040_zps77a8badf.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0040_zps77a8badf.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0041_zpsf061aaa4.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0041_zpsf061aaa4.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0042_zps239432eb.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0042_zps239432eb.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0046_zpsa0b803dd.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0046_zpsa0b803dd.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0047_zps5925e36a.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0047_zps5925e36a.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0048_zps111f4b65.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0048_zps111f4b65.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0050_zpsf3d73a69.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0050_zpsf3d73a69.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMG_0052_zps931f408c.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMG_0052_zps931f408c.jpg.html)

http://www.catchesidecutlery.com/shop.html

Mrmnms
10-26-2013, 07:57 PM
They are gorgeous Will. I'll be stunned if they last the weekend.

WillC
10-27-2013, 05:23 AM
Thank you Kind Sir, very nice to wake up to Sales, the two Gyuto's and a parer are gone to members here, thanks KKF.
Three of the Parers are remaining. I had a chance to get some better shots for each of the stainless damascus, which I have added to my site.
http://www.catchesidecutlery.com/shop.html
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMGP3847_zps22d08ff3.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMGP3847_zps22d08ff3.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMGP3846_zpsc8c65766.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMGP3846_zpsc8c65766.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/stainless%20damascus/IMGP3845_zpsf72f95a8.jpg (http://s798.photobucket.com/user/catcheside/media/stainless%20damascus/IMGP3845_zpsf72f95a8.jpg.html)
http://www.catchesidecutlery.com/shop.html

marc4pt0
10-27-2013, 01:22 PM
Lucky folks! Those gyutos look stellar!

WillC
10-28-2013, 03:33 PM
Both Gyuto's and the 78mm Parer got packed and sent off today. Three lovely stainless damascus clad parers are still in store. The largest really a Petty at 110mm. :)

Lefty
10-28-2013, 04:07 PM
I wish I could get one of those. Just insane work, Will.

ejd53
10-28-2013, 09:29 PM
Beautiful work, Will. Can't wait to see how mine turns out. :doublethumbsup:

WillC
10-31-2013, 05:05 AM
Thank you Ed, Im looking forward to seeing it too, after the one that was not, but the next feather damascus will be even better;)

A couple of Pares still remaining. These are RARE from me. Im surprised they are still there.:big eek:

Vangelis
10-31-2013, 06:08 AM
The 23cm Guyto arrived this morning in a very nice package !!!! Result I was late at work as I had to chop some apples :D. First impressions very good. It is a light and nimble knife. Apples aren't the hardest vegetable but the was 0 effort, very happy with the result.

I am not 100% certain about the handle, seems a bit short for me compering to the other wa hanldes I had.

I will spend more time with it tonight, I am planning to make a winter vegeterian stew.

V

WillC
10-31-2013, 08:41 AM
Excellent thanks, let me know how you get on with it. A handle length to suit someones hand would br the diagonal measurement across your palm. Any extra length is spare or pertruding. These were 13 cm in length i think or just under if your palm measurement is 14 plus it could be a tad short for you. Drop me a pm aftet you have used it a whike and we will work it out.
Cheers
Will

Vangelis
10-31-2013, 09:24 AM
Of course, and I will give an initial review after using it. My current go-to gyuto is going to have some new shoes... so I will use it alot. I heard that you will be at Maxim's gathering ! Unfortunately I have other commitments for the weekend.


By the way did you etch the edge :D

Best

Lefty
10-31-2013, 09:34 AM
Light and nimble? Crazy. The Catcheside gyuto I am doing some work for is not light, but I mean that in a good way. I'd put it in the medium category. It's a gorgeous piece, for sure, though.

Vangelis
10-31-2013, 09:47 AM
Well this is how it felt, I am not an expert on how to categorise the gyutos :D but sure it is a gorgeous piece of cutting art.

All credits to this impulse purchase goes to my girlfriend.


Light and nimble? Crazy. The Catcheside gyuto I am doing some work for is not light, but I mean that in a good way. I'd put it in the medium category. It's a gorgeous piece, for sure, though.

ejd53
10-31-2013, 10:19 AM
Light and nimble? Crazy. The Catcheside gyuto I am doing some work for is not light, but I mean that in a good way. I'd put it in the medium category. It's a gorgeous piece, for sure, though.
:plus1: My Red Shark gyuto is not light, but it cuts so well that you just fly through things. Maybe that takes some of the weight off. :biggrin:

WillC
10-31-2013, 01:51 PM
The san mai are not thin. I would say they are medium too Lefty... Thickness between 3.5mm and 4mm at the heel. Ed I think yours is on the thicker side close to 4mm and Vangelis, around 3.6mm. I think the balance will have allot to do with it feeling nimble and a slender tip. The weight is pretty much over the heel. Happy cutting,Thanks All:biggrin:

WillC
10-31-2013, 04:19 PM
I have set up myself a lightbox so I can get home late and still be able to get some well lit Photos for the my site. Next lot I will do this on the website.
Here are a few test shots of the two tone amboyna Paring knife in my store. Camera is also new to me, my first dslr, an old Eos D20, really nice piece of kit and an ebay bargain:D
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1970_zps31969b89.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1970_zps31969b89.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1968_zpsa0e72082.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1968_zpsa0e72082.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1967_zpsa873d6cf.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1967_zpsa873d6cf.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1966_zpsbe667747.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1966_zpsbe667747.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1961_zps1c066680.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1961_zps1c066680.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1959_zps5e2097e5.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1959_zps5e2097e5.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1958_zps6cfcb073.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1958_zps6cfcb073.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1955_zps9795db15.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1955_zps9795db15.jpg.html)
http://i798.photobucket.com/albums/yy262/catcheside/_MG_1953_zps43ff967f.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_1953_zps43ff967f.jpg.html)
Im pretty happy for a first go with the kit, been a while since I used a full manual camera, I need to get a tripod to get the depth of field type shots. What do you think?

Lefty
10-31-2013, 07:39 PM
It looks pretty nice to me, Will. The colours look really true, which I often find a difficult task.

CanadianMan
10-31-2013, 08:11 PM
Great pictures will!! You captured the grains really well

nepastovus
12-20-2013, 03:57 PM
you said you still have something for sale? :)

Dream Burls
12-20-2013, 09:28 PM
Nice Will. The EOS line is very good. A tripod will help with the depth of field, but the pictures you posted look great for handheld shots.

WillC
01-10-2014, 12:09 PM
Tripod is deffo still on the list!
Just a quick note to say I added two knives to my site. A stainless damascus D2 core Honesuki, and a Stainless sammy/01 core 70mm Parer:)
http://www.catchesidecutlery.com/shop.html

WillC
01-11-2014, 04:19 PM
I finally bought myself a decent Tripod today, a Manfrotto one, so excuse the shed load of pictures, some shot for depth of field. These are the two available. There are actually two of the D2 core hard use Petty available, a more honesuki shape and a more small Petty, line knife one. I want to keep one back for a while to test against cpm 3v. But I'm not too fussed which one I sell if someone fancies the other one let me know. Lots of pics of the Parer, so many tiny details to get across.

Parer 70mm
http://i798.photobucket.com/albums/yy262/catcheside/_MG_2574_zpsd9e68075.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2574_zpsd9e68075.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2575_zpsfddc9afa.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2575_zpsfddc9afa.jpg.html)


http://i798.photobucket.com/albums/yy262/catcheside/_MG_2583_zps53fc56b2.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2583_zps53fc56b2.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2587_zps473d145c.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2587_zps473d145c.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2590_zps92d3bfa3.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2590_zps92d3bfa3.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2597_zpsc31d6d76.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2597_zpsc31d6d76.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2604_zps1b388917.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2604_zps1b388917.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2607_zps8f5ecca3.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2607_zps8f5ecca3.jpg.html)

These are the two 180mm D2 core stainless damascus clad...
http://i798.photobucket.com/albums/yy262/catcheside/_MG_2615_zpsf972b08a.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2615_zpsf972b08a.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2622_zpseb4a442e.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2622_zpseb4a442e.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2631_zps962137c6.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2631_zps962137c6.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2635_zpsacc28096.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2635_zpsacc28096.jpg.html)

I will offer a 20% forum discount off the web price for forum members for these for a January incentive. So PM me and I will send you a discounted total.

Thanks All

Will

Mrmnms
01-11-2014, 08:01 PM
Very curious about your CPM 3v comparisons Will. These knives look amazing. Beautiful and tough is a good combination .

WillC
02-05-2014, 05:36 PM
Couple of wee gorgeous ones are available.

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2657_zps717a4010.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2657_zps717a4010.jpg.html)

Buy me now. (http://www.catchesidecutlery.com/shop.html)

WillC
02-06-2014, 03:32 AM
Thats about 20% off list on those two for you btw. :biggrin:

WillC
02-07-2014, 02:24 PM
Those two sold, many thanks, its been a heavy month on materials bills, it all helps.
I'm not 100% sure which will be up next, maybe one of the 3v, need to do some testing first though.
Make sure you get on my Mailing list via my website for updates.
Thanks All

V1P
02-07-2014, 02:58 PM
Wow, nice Will!

I notice that you custom makers been pumping out new pieces at unbelievable speed lately. Santa must have loaned you his elves after the Christmas season, lol.

Ferry

WillC
02-07-2014, 03:09 PM
Thanks Ferry, Sometimes I put a couple aside for a rainy day, or times like these when I'm in the midst of a sea damascus production with not much being finished.....but don't tell anyone:D

daddy yo yo
02-08-2014, 05:27 PM
Thanks Ferry, Sometimes I put a couple aside for a rainy day

Having spent some time nearby (Bromyard) on several occasions, I really have to say that you have quite many rainy days on your island... ;-)

WillC
02-26-2014, 06:28 PM
This pair,

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2936_zpsdc4a240f.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2936_zpsdc4a240f.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_3014_zpsb9865289.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_3014_zpsb9865289.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_3018_zps49ab9e9f.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_3018_zps49ab9e9f.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2914_zps8dd9fffb.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2914_zps8dd9fffb.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/_MG_2910_zps01c40a5b.jpg (http://s798.photobucket.com/user/catcheside/media/_MG_2910_zps01c40a5b.jpg.html)

Were briefly for sale earlier. :D I sent a mail shot out to those on my mailing list.

Next up between commission pieces will be the cpm 3v stainless clad pieces...

So make sure you subscribe to my mailing list for the shout out. Many thanks

Will

http://www.catchesidecutlery.com/shop.html

WillC
07-30-2014, 11:08 AM
This very special Guy is up for sale, a 310mm Suji in the powdered carbon damascus.
Knife specifics...
310mm Powder Damascus Sujihuki.
This piece is a complete one off, made from Powdered carbon steels and pure Nickel. The edge is 01.
Here is the work in progress of the making of this special piece of work.
http://www.kitchenknifeforums.com/showthread.php/18794-Powder-damascus-Masterclass-piece-WIP
Knife specifications are as follows.
Blade length measured from heel to tip 310mm
Height of blade at the heel 45mm
Thickness at spine over heel 3.5mm, halfway 2mm, 1inch behind tip , 0.8mm
Convex, fully ground double bevel, very thin at the edge.
Hardness of the edge material - 61hrc.
Handle length 140mm.
Handle materials - Multi-bar nickel twist ferrule, Fire within end cap. Both with silver soldered nickel silver spacer, hard soldered. The wood is best quality Rosewood burl.
This Knife balances 1cm in front of the heel and feels perfect in hand.

Images

http://i798.photobucket.com/albums/yy262/catcheside/Powder%20damascus%20WIP/_MG_4106_zps3d6bcb55.jpg (http://s798.photobucket.com/user/catcheside/media/Powder%20damascus%20WIP/_MG_4106_zps3d6bcb55.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/Powder%20damascus%20WIP/_MG_4124_zps4eb1f590.jpg (http://s798.photobucket.com/user/catcheside/media/Powder%20damascus%20WIP/_MG_4124_zps4eb1f590.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/Powder%20damascus%20WIP/_MG_4132_zpsd2174ad4.jpg (http://s798.photobucket.com/user/catcheside/media/Powder%20damascus%20WIP/_MG_4132_zpsd2174ad4.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/Powder%20damascus%20WIP/_MG_4143_zps78d0f5bb.jpg (http://s798.photobucket.com/user/catcheside/media/Powder%20damascus%20WIP/_MG_4143_zps78d0f5bb.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/Powder%20damascus%20WIP/_MG_4121_zps4d2f7d11.jpg (http://s798.photobucket.com/user/catcheside/media/Powder%20damascus%20WIP/_MG_4121_zps4d2f7d11.jpg.html)

Available to buy now in my store.

http://www.catchesidecutlery.com/shop.html

Message me if you have any questions, Thanks All :)

WillC
07-30-2014, 04:35 PM
Another more simple but very pretty Knife added to the store today, in my Cpm3v core stainless clad:)


http://i798.photobucket.com/albums/yy262/catcheside/2014/_MG_4158_zps897212e5.jpg (http://s798.photobucket.com/user/catcheside/media/2014/_MG_4158_zps897212e5.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/2014/_MG_4154_zps20a3ace5.jpg (http://s798.photobucket.com/user/catcheside/media/2014/_MG_4154_zps20a3ace5.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/2014/_MG_4151_zpsf8fdef2f.jpg (http://s798.photobucket.com/user/catcheside/media/2014/_MG_4151_zpsf8fdef2f.jpg.html)

http://i798.photobucket.com/albums/yy262/catcheside/2014/_MG_4145_zpsae84841d.jpg (http://s798.photobucket.com/user/catcheside/media/2014/_MG_4145_zpsae84841d.jpg.html)

Stainless steel san mai , Petty 180mm, CPM3v core, 304L cladding.
This is hand rubbed then has a semi mirror polish to bring out the weld activity in the etch.
Love this steel in a kitchen knife, as easy to sharpen as aeb-l. Takes a fine edge and has excellent wear resistance for a finer carbide steel.
Blade length 170mm
Height at heel 38mm
Thickness on spine over heel 3mm
Full distal taper, convex ground to very thin at the edge.
Handle is in Wild almond burl, Koa Spacer with a Jadeite spacer.
Balance bang on the heel on this one. Feels great!

Buy now in store.

http://www.catchesidecutlery.com/shop.html

erikz
07-30-2014, 04:45 PM
Not anymore Will, see you already sold it :P Your mail was in my inbox for 15 minutes and it was gone :o

It's a beauty really, good to see someone got it that quick :)

WillC
07-30-2014, 05:12 PM
Mmm both knives are showing in stock in my stock list admin part. The Suji is saying out of stock on my website, could be someone clicked on it by accident. Takes a few minutes to refresh back to showing stock again, if the is no check out. But both still available, if anyone is having trouble drop me a pm or email.
Cheers
Will

Dinsdale
07-30-2014, 05:27 PM
If the petty is available i'll take it. I clicked on the petty, it said it was added to the cart but no link to the cart shows up?

WillC
07-30-2014, 05:44 PM
Mmmm I have not had this glitch before, It may be just the button type I selected wrong. As both knives have been showing no stock, meaning someone has clicked to purchase but no checkout, or as you say checkout is not coming up. I have replaced the Buy now with direct contact email link, until I work out what happened.
Dinsdale, excellent, sorry for the checkout problem there....if you would like the Petty, drop me an email or pm and I will send my paypal info. Cheers
Will

WillC
07-30-2014, 05:54 PM
Yes I was using a button which opens an internal checkout, which I have not set up. I normally use a standalone button which simply redirects to paypal checkout. Will leave it as email contact overnight and see who was trying to get what. Sorry folks, still at least I know what was happening now.

WillC
07-30-2014, 06:33 PM
Thanks Dinsdale, sold to that Man. And I enjoyed catching up on some Monty Python....
https://www.youtube.com/watch?v=MXjrMU0jpAE

The Suji is still available:)

Dinsdale
07-30-2014, 08:13 PM
I can never get enough of MP. Funniest show in the history of television

ejd53
07-31-2014, 11:04 AM
I told you Will, the page should be named "Knives I used to have for sale". :biggrin:

WillC
08-07-2014, 03:57 AM
Thanks Ed, yes the first hour of having a knife for sale is a bit crazy. Not very good when I had made an error with the buttons. Both appeared to have sold at one point. The san mai was claimed however no one checked out with the Suji in the end and I had no follow up email, so I guess someone held off or pressed the button by mistake.
So the One off powder damascus Suji is still available. Buttons work now I have checked :)

WillC
08-12-2014, 09:44 AM
After the check out fiasco I have upgraded my checkout system.
http://www.catchesidecutlery.com/shop.html
Now accepting Credit/debit card as well as Paypal for your convenience.
Thanks All