PDA

View Full Version : Shun facelift



jgraeff
11-15-2012, 02:42 PM
so today at work i was using my shun, i noticed 1 of two things. 1 the non-rounded spine hurts after long use and makes my calluses come back, as well as it was wedging pretty badly on almost anything.

i took a look at it and it was pretty thick, keep in mind ive had this knife for 3 almost 4 years, its almost short enough to be called a suji.

When i got home i decided to see if i could give it a make over. I took 220 grit sandpaper to the spine and up to about 800 to round it off, took a little while but much better i should have done that years ago!

i also spent some time thinning it down and enhancing the grind, i have a hand grinder so i used that with 400 grit sandpaper to remove most of the metal i needed, i then took it to the diamond plate, gesshin 400 and 4k( to remove scratches)

man this thing cuts like on other now i was really surprised, im curious how long the edge will last but i was very surprised at how sharp it got, much better than i have been able to get on this knife before.

anyways just figured id share, i kind of underestimated the value in thinning, wont do that again.

Johnny.B.Good
11-15-2012, 02:52 PM
I want before and after pictures, and I want them right now.

jgraeff
11-15-2012, 03:07 PM
i wish i would have thought to take pictues im really bad about that....

so does anyone know how to etch blades? the damascus has been faded for a long time been thinking about redoing it.

TB_London
11-15-2012, 03:15 PM
http://www.kitchenknifeforums.com/showthread.php/6474-Damascus-Knives-amp-Re-Etchng

tk59
11-15-2012, 03:18 PM
Nice! I did that a while back with a Fujiwara Teruyasu. The thing cuts like crazy now.

stevenStefano
11-15-2012, 05:14 PM
Any time I thin my knives they cut amazingly well for a long time, but clearly you can't do it too many times. I think my Kono HD has taken about all it can

makanouchi
11-16-2012, 10:58 AM
Pictures please.

Dave Martell
11-16-2012, 12:09 PM
Shuns will etch up pretty nicely but require a strong buff job to get them shiny again.