View Full Version : Stripping CCK Cleaver
12-12-2012, 04:32 PM
I'm sure this has been covered before,I use my CCK sm. cleaver quite a bit,want to strip of the laquar & the coating.What is the best way to do this & procedure & materials.
12-12-2012, 04:54 PM
What do you mean by coating? The lacquer you can strip with acetone, but that's the only coating I know of. If you mean the kurouchi, you can take it off with a scrub brush or steel wool or anything like that (though in that case you may as well just skip the acetone).
12-12-2012, 05:44 PM
I have used acetone and it worked well :)
12-12-2012, 07:12 PM
Thanks yes that is what I meant the Kurouchi & the laquer,want to strip the metal bare.I have started wt. mineral spirits wt. some success.Will pick up some acetone plan to take off remainder Kurouchi wt. wet dry sandpaper that way I can control scratch marks.Want to get rid of the deep scratches at the back bevel,I am pretty sure I can do that wt. my Atoma's finishing wt. stones.Does this sound OK?
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.