- Joined
- Jan 13, 2013
- Messages
- 1,510
- Reaction score
- 8
The OEM edge pro stones come from them apparently but as this review indicates, they actually sell some potentially even better stones that aren't part of the edge pro kits
http://www.makeitsharp.com/blog/?p=16.
The stones mentioned are very inexpensive from Boride of course and aluminum blanks are trivial to cut from stock available at, Home Depot for example, and I found they cost about a 1$ each if you cut them from a stock bar. The adhesive Ben dale uses is 3M super 77 but I suspect any good contact cement would work for gluing stones to blanks....
But the minimum quantities Boride requires make it impossible for an average knife owner to deal with them. However, the nice folks at: www.moldshoptools.com agreed to stock (in 1/4 thickness so use a drill stop collar!) all of the ones listed in the review above and some others that I suggested they get. They aren't all listed on their web site yet but if you call Kristen at 231-947-2341 she can sell them to you now...
Anyway as soon as I start using them I will try to post a review of the ones I bought to replace the similar grit ones supplied with the Edge Pro
http://www.makeitsharp.com/blog/?p=16.
The stones mentioned are very inexpensive from Boride of course and aluminum blanks are trivial to cut from stock available at, Home Depot for example, and I found they cost about a 1$ each if you cut them from a stock bar. The adhesive Ben dale uses is 3M super 77 but I suspect any good contact cement would work for gluing stones to blanks....
But the minimum quantities Boride requires make it impossible for an average knife owner to deal with them. However, the nice folks at: www.moldshoptools.com agreed to stock (in 1/4 thickness so use a drill stop collar!) all of the ones listed in the review above and some others that I suggested they get. They aren't all listed on their web site yet but if you call Kristen at 231-947-2341 she can sell them to you now...
Anyway as soon as I start using them I will try to post a review of the ones I bought to replace the similar grit ones supplied with the Edge Pro