Quantcast
assymetric grind or assymetric knife?
Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: assymetric grind or assymetric knife?

  1. #1
    Senior Member
    Join Date
    Jan 2013
    Location
    Bay area
    Posts
    500

    assymetric grind or assymetric knife?

    is there any obvious way to tell if a knife with say a 80/20, 70/30 or 60/40 grind has simply been sharpened asymmetrically or was actually forged/stamped asymmetrically. In the former case one could make it symmetric without any loss, in the later not so much. i'm thinking of my carbonext for example, Masahiro MV-H or Tojiro DP...

    TIA

  2. #2
    I have yet to see a Japanese knife whose blade is anything but asymmetric so IMO it's pretty easy to tell which ones are asymmetric because that's all of them.

  3. #3
    Senior Member Benuser's Avatar
    Join Date
    May 2011
    Location
    Amstelveen, The Netherlands
    Posts
    2,227
    All Japanese I've seen - and, by the way, most French - are more or less asymmetric, one side more or less flat, another one more or less convex, and have a more or less off centered axis. A really symmetric blade would wedge as no other. You may put a symmetric edge on an asymmetric blade, but sooner or later you will experience crazy steering or wedging. If the blade is very thin it's not all that obvious.

  4. #4
    My Hiromoto and Yoshihiro gyutos are both convex on the right side and pretty much flat on the left. Any decent straight edge will tell you.

  5. #5
    Senior Member stevenStefano's Avatar
    Join Date
    May 2011
    Location
    Norn Iron
    Posts
    1,393
    Simple way is to look at the knife from the choil. Like everyone says, basically all of them are asymmetric, which sucks if you're a lefty

  6. #6
    Senior Member
    Join Date
    Dec 2012
    Location
    washington dc
    Posts
    1,404
    im not all too fond of asymmetric bevels, is it bad to sharpen an asymmetrically ground knife to a 50/50 bevel? if so, why?

  7. #7
    Senior Member
    Join Date
    May 2011
    Location
    Boston
    Posts
    688
    Quote Originally Posted by panda View Post
    im not all too fond of asymmetric bevels, is it bad to sharpen an asymmetrically ground knife to a 50/50 bevel? if so, why?
    Dave wrote an AWESOME thread about this. It's definitely worth a read.

    http://www.kitchenknifeforums.com/sh...-The-REAL-DEAL

  8. #8
    Senior Member
    Join Date
    Jan 2013
    Location
    Bay area
    Posts
    500
    So this obviously leads to a question: is a lefty knife forged differently or just badly resharpened.....

  9. #9
    My Katsushige Anryu santoku and petty are both as symmetric as I can tell. I've not seen an asymmetric santoku yet... or have I been missing something?

  10. #10
    Senior Member
    Join Date
    Jan 2013
    Location
    Bay area
    Posts
    500
    I think one exception might be macs. I'm looking at my Mac Pro MT-80 down the choi and it looks awfully symmetric to me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •