Quantcast
Hattori FH vs Gesshin Ginga
+ Reply to Thread
Results 1 to 8 of 8

Thread: Hattori FH vs Gesshin Ginga

  1. #1

    Join Date
    Dec 2012
    Posts
    11

    Hattori FH vs Gesshin Ginga

    I am looking to get a 270 suji and these are both around the same price. Opinions?

  2. #2
    Senior Member stevenStefano's Avatar
    Join Date
    May 2011
    Location
    Norn Iron
    Posts
    1,391
    I'd say the FH will have a nicer handle but the Ginga will outperform it by some way. I'd probably go for the Ginga

  3. #3
    Senior Member eaglerock's Avatar
    Join Date
    Oct 2012
    Location
    Finland
    Posts
    499
    I would like to try the FH, but I'm very happy with my ginga

  4. #4
    Senior Member

    Join Date
    Feb 2011
    Location
    Pensacola, FL, USA
    Posts
    3,808
    How much flex are you looking for? The Hattori FH is quite a bit stiffer than the Gesshin Ginga. It's also a tad taller - ~39mm at the heel vs ~37mm.

    In my experience, the VG10 of the Hattori is absolutely comparable to the undisclosed steel in the Gesshin Ginga.

    I have to give the nod to the handle of the Hattori. You can get cocobolo or ebony as well as black linen Micarta, while the Gesshin Ginga is available only with the plain black scales.

    The Gesshin Ginga also comes with a saya, that will cost you around $20-25 extra from JCK (if you want a saya, that is).

    Rick

  5. #5
    Canada's Sharpest Lefty Lefty's Avatar
    Join Date
    Mar 2011
    Posts
    5,101
    Find a coin. Make heads represent the Hattori, and tails the Ginga. Flip the coin. Buy the knife that the coin tells you to, from a great vendor (either guy). Love your knife.

    Easey-peesy!
    09/06

    Take a look around at: www.sharpandshinyshop.com

    Email me at: tmclean@sharpandshinyshop.com

  6. #6

    Join Date
    Dec 2012
    Posts
    11
    Hmmmm wasnt expecting them to be so similar. Is the Hattori as thin? I know it is cheaper which is also appealing.

  7. #7
    Senior Member
    Join Date
    Feb 2011
    Location
    Vancouver, WA
    Posts
    402
    The Hattori FH is not a thin knife. It has just enough extra material to make it a stiff knife, without being too thick. The Hattori handles are the most comfortable to be found on a production knife.

    I don't own a Gesshin Ginga, but everything I've seen and heard, they are an excellent knife and would not hesitate to purchase one.

    My personal preference is for a stiffer knife. So the Hattori was a good choice for me.

    Jay

  8. #8
    Senior Member marc4pt0's Avatar
    Join Date
    May 2012
    Location
    MD
    Posts
    1,310
    Have the Hattori 240 gyuto with cocobolo and 150 petty in blackwood. Both are awesome knives that can get wicked sharp. The handles are top notch, but the spine on them are not rounded. For the petty it's obviously not a problem. But for the gyuto it was discouraging, so I rounded out off myself. It gave the knife a whole new life for me. It looks and feels a Lot thinner, and has gotten a lot more use lately.
    I say go Hattori

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts