Quantcast
1095 vs 1084 vs 52100
+ Reply to Thread
Results 1 to 10 of 10

Thread: 1095 vs 1084 vs 52100

  1. #1

    Join Date
    Mar 2013
    Location
    Nebraska
    Posts
    29

    1095 vs 1084 vs 52100

    Are any of these steels good for kitchen knives? What are the pros/cons of each steel?

  2. #2
    Senior Member

    Join Date
    Feb 2011
    Location
    Pensacola, FL, USA
    Posts
    3,814
    There is an exhaustive and very comprehensive database of knife steels compiled by Gator (thanks Gator!) here:

    http://zknives.com/knives/steels/index.shtml

    The database is also available as an app for Android and iPhone.

  3. #3

    Join Date
    Mar 2013
    Location
    Nebraska
    Posts
    29
    Thanks for the link Tiger.

  4. #4
    Senior Member

    Join Date
    Feb 2011
    Location
    Pensacola, FL, USA
    Posts
    3,814
    You're welcome.

    If you have specific questions about those steels, a post in the Shop Talk subforum might get some specific answers.

    http://www.kitchenknifeforums.com/fo...p/51-Shop-Talk

  5. #5

    Join Date
    Mar 2013
    Location
    Nebraska
    Posts
    29
    Thanks, I reposted it there.

  6. #6
    Mike Davis's Avatar
    Join Date
    May 2011
    Location
    Jackson, MI.
    Posts
    1,529
    I will go out on a limb and say that all 3, heat treated properly, will make great kitchen knives. All are good steels.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    731
    Quote Originally Posted by Mike Davis View Post
    I will go out on a limb and say that all 3, heat treated properly, will make great kitchen knives. All are good steels.

    I agree with this! I can vogue for 52100 from Marko his HT is amazing and very non reactive and rust resistant.

    Mike was that deba 1095 or w2? Also I forgot what steel is the necker? I know one I used was 1095.

    The deba steel was amazing, very non reactive Formed fast purple blue patina never browned or greyed over like some. Took a great edge and handled being wet very well. Burr was difficult to remove sometimes, great edge retention.

    The necker is well my EDC goes with me just about everywhere, knife gets scary sharp really easily. Never had a problem with burr on this steel. It's also pretty tough. Doesn't hold edge for a super long time although for EDC it lasts a while.

  8. #8

    Heath Besch's Avatar
    Join Date
    Jan 2012
    Location
    Texas
    Posts
    156
    I agree with Mike. I think that it depends on the smith and the user. What is a person looking for?

    The 10 series of steels are going to be the most reactive. They are amongst the simplistic chemistries out there. 52100 has some chromium added which helps with corrosion resistance, but by no means is it enough to make it a worry free steel. All of these do need attention to care to ensure their longevity and best performance.

    The smith and sharpener alike face the dilemma of producing a blade that will take an edge to the best of the steels ability. In the end it is up to the user to maintain it to keep/surpass the craftsmanship work. I know this is a bit much to ask of the user but the best of thing also need their attention to keep them at such a high level of performance.
    Do not tell me I can't, let me succeed or fail. Even a failure is a small success.

  9. #9
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    4,092
    Are you going to heat treat yourself or send out?


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  10. #10

    Join Date
    Mar 2013
    Location
    Nebraska
    Posts
    29
    I would send them out.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts