Quantcast
first DIY wa-handle
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: first DIY wa-handle

  1. #1
    Senior Member pkjames's Avatar
    Join Date
    Jul 2011
    Location
    Sydney
    Posts
    244

    first DIY wa-handle

    I have this little 135-140mm deba in pretty bad shape. dirty magnolia handle with plastic ferrule.

    Since I have being doing quite a bit of workworking, decided to give DIY handle a try since I have nothing to lose.
    Making a square was ok but sanding the corner was a bit tricky as it was so easy to mis-align the corners, thinking maybe next time to use a little block plane to slowly remove the corner.

    because it is the first try, just found some spare scarp timber lying around and didn't bother stabilizing the wood (still haven't completed my vacuum chamber yet).

    So, here we go:
    little deba, $30 from yahoo japan


    ferrule in bad shape


    PVA glue looks pretty strong, not sure if I should use epoxy instead.


    after sanding to 1200 grit and oil


    The installation was reasonably straight forward, and I found drilling the hole and filing it to correct shape/size was the most time consuming bit.
    here is the finished look. The fit was better than what i was expecting, and I sealed the gap with wax.





    Quite happy with the first try, and thanks for looking

    EDIT: PS, timber is red mahogany and queensland walnut, gotta love aussie timbers!

  2. #2

    Join Date
    Mar 2011
    Location
    Houston TX
    Posts
    1,339
    Nice job man. That handle looks great

  3. #3
    Senior Member NO ChoP!'s Avatar
    Join Date
    Apr 2011
    Location
    Clayton, NC- surrounded by lots of trees
    Posts
    2,081
    Looks good. What wood is it?
    The difference between try and triumph is a little "umph"! NO EXCUSES!!!!!!!
    chefchristophermiller@yahoo.com

  4. #4
    Senior Member pkjames's Avatar
    Join Date
    Jul 2011
    Location
    Sydney
    Posts
    244
    Quote Originally Posted by mhenry View Post
    Nice job man. That handle looks great
    cheers mate!
    hope that one day i can make some handles that are half decent as those from Stefan and Marko

  5. #5
    Senior Member pkjames's Avatar
    Join Date
    Jul 2011
    Location
    Sydney
    Posts
    244
    Quote Originally Posted by NO ChoP! View Post
    Looks good. What wood is it?
    added on original post.
    Red is red mahogany (a type of eucalyptus, nothing to do with mahogany) and brown is queensland walnut. Both are native aussie hardwood

  6. #6
    Senior Member
    Join Date
    Mar 2011
    Location
    Gothenburg, Sweden
    Posts
    499
    Did you pre-drill the parts before attaching them together?
    I am thinking of drilling a bigger diameter hole (idea from someone way smarter than me...) to give flexibility in direction when inserting the handle.

    Also, what tools didi you use? Power or hand?

  7. #7
    Senior Member pkjames's Avatar
    Join Date
    Jul 2011
    Location
    Sydney
    Posts
    244
    Quote Originally Posted by RobinW View Post
    Did you pre-drill the parts before attaching them together?
    I am thinking of drilling a bigger diameter hole (idea from someone way smarter than me...) to give flexibility in direction when inserting the handle.

    Also, what tools didi you use? Power or hand?
    I attached them before drilling. The bigger hole will certainly make the insertion easier but how to fix the tang to it securely? Would be nice to hear, as I also feared the tight hole may not be straight.

    I used belt sander and drill press. I drilled a small hole than slowly filed the hole to size.

  8. #8
    Canada's Sharpest Lefty Lefty's Avatar
    Join Date
    Mar 2011
    Posts
    5,197
    Nice work, man! Congrats on your first.

    Take it from me, a large hole, just larger than the tang diameter is essential in the main handle piece. For the ferrule, take a drill bit that is the thickness of the tang, drill three holes in a line and then use a micro-file to turn it into a tang slot.

    For blade installation, drip epoxy through your hole, insert tang and wipe excess with acetone. The epoxy is stronger than the handle material, and lighter to boot.
    09/06

    Take a look around at: www.sharpandshinyshop.com

    Email me at: tmclean@sharpandshinyshop.com

  9. #9
    Nice first handle.

    I have a trick for filling the hole with epoxy so it doesn't get all over. I cut a piece of wax paper say 5"x5" I mix the epoxy on that then roll/fold it up like a little pastry bag and insert the "tip" into the hole and squeeze it in. Insert tang and catch what comes out packing it around the tang before wiping it clean with acetone.

  10. #10
    Senior Member
    Join Date
    Mar 2011
    Location
    Cardiff, UK
    Posts
    806
    I drill a larger hole in the main handle block and partially through the ferrule. This is then filled with a dowel slotted to accept the tang. Playing with the dowel material can allow you to adjust the balance point. it also reinforces the joint with the ferrule. I posted a thread on it a while ago, but i think the pics died and i still havent gotten around to re-embedding them.....

    For making the slot in the ferrule a narrow jigsaw blade glued into a handle and tapered towards the tip makes a great broach. Easier and faster than a file IME. A fine file can then be used for tweaking the slot.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •