Quantcast
Nakiri recommendations?
Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Nakiri recommendations?

  1. #1

    Nakiri recommendations?

    Hi there! I'll fill out the questionnaire below, but the short version is that I'm looking for recommendations for a 180-ish nakiri in the sub-$200 range. Your input is appreciated!

    LOCATION
    What country are you in?

    Canada


    KNIFE TYPE
    What type of knife are you interested in (e.g., chef’s knife, slicer, boning knife, utility knife, bread knife, paring knife, cleaver)?

    Nakiri

    Are you right or left handed?
    Right

    Are you interested in a Western handle (e.g., classic Wusthof handle) or Japanese handle?
    I like the ergonomics of Shun handles, and would like something similar. I'm not crazy about the standard Wusthof grip for this style of knife, but I also don't want a straight circular or octagonal cylinder. Rounded edges are good.

    What length of knife (blade) are you interested in (in inches or millimeters)?
    180 mm

    Do you require a stainless knife? (Yes or no)
    "Require" is a bit strong, but I don't want it to be ruined if I forget and leave it on the counter for an hour.

    What is your absolute maximum budget for your knife?
    Preferably under $200, and preferably including shipping to Canada if it's not available domestically.


    KNIFE USE
    Do you primarily intend to use this knife at home or a professional environment?

    At home.

    What are the main tasks you primarily intend to use the knife for?
    I'm vegan, so I'm almost exclusively cutting vegetables (slicing, chopping, mincing).

    What knife, if any, are you replacing?
    An old supermarket-quality Henkel chef's knife.

    Do you have a particular grip that you primarily use?
    Pinch.

    What cutting motions do you primarily use?
    Push-cut.

    What improvements do you want from your current knife? If you are not replacing a knife, please identify as many characteristics identified below in parentheses that you would like this knife to have.)
    Obviously just about anything will be better than what I have now, so I've answered these questions more in terms of the qualities I want as compared to other nakiris.

    Better aesthetics (e.g., a certain type of finish; layered/Damascus or other pattern of steel; different handle color/pattern/shape/wood; better scratch resistance; better stain resistance)?
    I would like it to look like it costs as much as it does, but beyond that I'm pretty flexible.

    Comfort (e.g., lighter/heavier knife; better handle material; better handle shape; rounded spine/choil of the knife; improved balance)?
    Handle comfort and balance are important - I want that "extension of my arm" feeling.

    Ease of Use (e.g., ability to use the knife right out of the box; smoother rock chopping, push cutting, or slicing motion; less wedging; better food release; less reactivity with food; easier to sharpen)?
    I want something with a very straight bottom (for less accordioning) and a slight curve at the tip. Again, I like the shape of Shun nakiris - I would probably get one if they were a bit longer. I don't want a nakiri with an aggressive curve - if I did, I'd buy another chef's knife.

    Edge Retention (i.e., length of time you want the edge to last without sharpening)?
    No particular requirement.


    KNIFE MAINTENANCE
    Do you use a bamboo, wood, rubber, or synthetic cutting board? (Yes or no.)

    Yes.

    Do you sharpen your own knives? (Yes or no.)
    If not, are you interested in learning how to sharpen your knives? (Yes or no.)
    Are you interested in purchasing sharpening products for your knives? (Yes or no.)

    I sharpen my knives with a Chef's Choice 4643 manual pull-through sharpener. I am not interested in investing the time and money required to start using stones.


    SPECIAL REQUESTS/COMMENTS
    If you don't have any suggestions that meet my exact criteria, I'd also be interested in suggestions for a 165 mm that you think would be a better choice than the Shun classic.

    Thanks guys!

  2. #2
    Senior Member Justin0505's Avatar
    Join Date
    Feb 2011
    Location
    Minneapolis, MN
    Posts
    1,433
    If you're going to stick with the chefs choice sharpener, then dont sink too much into a good knife. That sharpener will not createbthe propper angle or level of finish. Over time your edge will develop too much thickness behind it and the knife will not cut well even if its sharp. Pull-through sharpeners are also known for gradually creating holes or concave sections which will be very noticable on a flat profile knife like a nakiri.

    Just get something cheap like a tojiro.
    "I gotta tell ya, this is pretty terrific. Ha hahaha, YEAH!" - Moe (w/ 2 knives). http://www.youtube.com/watch?v=YVt4U...layer_embedded

  3. #3
    Senior Member
    Join Date
    Mar 2011
    Location
    Wales, UK
    Posts
    861
    Since you are using a pull through sharpener, i would steer clear of the harder steel choices. In addition, preserving the geometry of the knife will be problematic.

    The Gesshin Uraku SKD 165mm nakiri is a nice knife for the money.

  4. #4
    Well, poop. Okay, what if I were willing to pay to have it sharpened a couple times a year? It's more important to me to have a decent knife than to be able to sharpen it at home.

  5. #5
    I like ChefsChoice sharpeners but if you are going for a decent quality nakiri just try learning to sharpen it your self. The straight edge is easy compared to some blade styles and all you need is a 1200 grit King most of the time.

  6. #6
    Okay, maybe I should stop being so lazy and just learn to sharpen a knife. Assuming I do, what knife would you recommend?

  7. #7
    Senior Member RiffRaff's Avatar
    Join Date
    May 2012
    Location
    New York, NY
    Posts
    83
    Murray Carter always has a few on his website. In case you don't know his work (and it's not often mentioned in these parts for some reason. . . ) he's one of the top bladesmiths in the country and specializes in Japanese-style kitchen knives. His knives come in several levels of fit and finish, but even at the least expensive level you're getting a blade, if not a handle, worthy of a professional. He pretty much uses white steel only, typically clad in a stainless jacket. Good luck!

  8. #8
    Senior Member
    Join Date
    Feb 2013
    Location
    Calgary, Canada
    Posts
    89
    Hmm If you want a 180 nakiri for under 200 maybe try the Konosuke HH 180mm Nakiri. I have the 210 petty of that series which is really good, also you should either learn to sharpen it yourself or get it sharpened for you every month or so.

  9. #9
    I did not read the above information because when it comes to nakiri's you buy a Carter.
    Twitter: @PeterDaEater

  10. #10
    Senior Member Benuser's Avatar
    Join Date
    May 2011
    Location
    Amstelveen, The Netherlands
    Posts
    2,228
    Quote Originally Posted by Mdnef View Post
    It's more important to me to have a decent knife than to be able to sharpen it at home.
    I would tend to say, it's more important to know how to sharpen a knife, than having a great one. Even a great blade will dull. Learn decent sharpening.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •