Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Kanemasa 270mm Sujihiki

  1. #1
    Senior Member Brad Gibson's Avatar
    Join Date
    May 2013
    Location
    San Diego, CA
    Posts
    833

    Kanemasa 270mm Sujihiki

    Hey guys,

    I just got this bad boy off of another forum member and have put it through a couple weeks on the line and my roommate who is also a line cook is using it on the line as we speak.

    I work in a steakhouse and ran the knife through about 20 each ribloins and striploins as well as did some filet portioning with it. I found it too long and basically unreasonable to break down tenderloins so I kept that for a smaller knife. I also use the suji to portion salmon, swordfish, and big eye #1 ahi tuna and had a wonderful time with it for those tasks as well.

    I found this knife to have one of those most aesthetically pleasing shapes I have seen in a suji. Its kirisukesque tip and long lines give it a great look. I really did not enjoy the handle as much as I should but I think it is simply because it is a western and it feels a little handle heavy for my liking. I am more of a wa handled kind of guy and in the future I hope to be able to get my hands on a wa suji of the same size or longer.

    I never had a problem with this but as of now my roommate has had it for about a week and a half and I saw it the other night and it has a ton of micro chips in it. Like four near the heel and one near the tip. He swears he isnt using it on any hard foods or abusing it and I trust that.

    Has anyone else found a kanemasa blade being prone to chipping? Please chime in if you have had experiences with a carbon sujihiki of this length chipping on you and if you have any suggestions as to a way to sharpen it so that it would be less likely to happen again.

    I have sharpened this knife on a green brick 2000 grit synthetic a baby blue 6000 grit and stropped on balsa woods with sprays.

    I don't know why the knife would be chipping other than maybe the steel is prone to it or if there is something obvious to you guys that I am doing wrong in the sharpening process. I am not using any microbevels and I barely know what a microbevel is, but for some reason I thought that maybe I should put one on to strengthen it.

    Thanks for your replies and taking the time to read my short review,

    Brad

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    "A recipe has no soul. You as the cook must bring soul to the recipe." -Thomas Keller

  2. #2
    Nice looking blade, I love that profile myself. Sounds like a microbevel is just what you need. Jon has a good video on them on his youtube channel:

    https://www.youtube.com/watch?v=xwnF...216AB&index=10

    I found it helped alot on my knives, especially the harder ones.
    Rule #1- Don't sweat the small s%&t, rule #2- It's ALL small s%&t
    Mikey

  3. #3
    Senior Member
    Join Date
    Feb 2011
    Location
    San Diego, CA
    Posts
    4,214
    I've used/seen/sharpened several. I haven't seen excessive microchipping.

  4. #4
    Senior Member Miles's Avatar
    Join Date
    Mar 2011
    Location
    Deep in the heart of a Texas kitchen
    Posts
    523
    Never had an issue with mine. If you don't have issues with chipping and your roomie has issues then I can only presume there must be something in his technique or maybe something that he's cutting that's creating the issue. Easy solution is microbevel or simply sharpen at a slightly more obtuse angle to give it a bit more strength behind the edge.

  5. #5
    Senior Member Miles's Avatar
    Join Date
    Mar 2011
    Location
    Deep in the heart of a Texas kitchen
    Posts
    523
    BTW, that's a sweet handle...

  6. #6
    i'm going to have to go with user fault on the microchipping... this is not a knife i would expect to see that in... the steel/HT is on the tougher side for sure

  7. #7
    Brad got that knife from me and if he wants to sell it back I'll buy it! I bought it from Jon about 2.5 years ago, kalaeb did the handle (he did a great job even though he'd just started) and I never had a microchip that I recall. The steel is pretty pedestrian but it took a nice edge. The profile is terrific.
    "Too much of anything is bad, but too much good whiskey is barely enough." —Mark Twain

  8. #8
    Senior Member marc4pt0's Avatar
    Join Date
    May 2012
    Location
    MD
    Posts
    1,562
    Nice knife, profile and handle. You guys must have a sweet station on the line to be able to rock such a lengthy knife!
    Also glad to see another Marco fan!

  9. #9
    Senior Member Benuser's Avatar
    Join Date
    May 2011
    Location
    Amstelveen, The Netherlands
    Posts
    2,301
    Some knives have a lot of microchipping as long as you don't entirely remove the buffered factory edge.

  10. #10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •