Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: singatirin 240 gyuto

  1. #1

    singatirin 240 gyuto

    I haven't seen this reviewed and not sure many people have tried them. I'd been looking at them for a bit now (mainly because of the great price point for a true honyaki blade) so when Maxim put them on sale I couldn't resist. I'll say first experience buying from Maxim, but definitely won't be the last. Simple process and very quick shipping from Europe to US.

    The knife is right at 250mm x 46mm and weighs in at 174grams. This is an interesting weight for me, lighter than I'm used to but definitely not a laser. Balance point is at first kanji mark from handle--fairly blade heavy which I like.

    Fit and finish was good. Nicely rounded spine and choil. Hamon line is distinct, but somewhat non-traditional--straight line rather than wave. The handle is burnt chestnut which I like for feel/grip. I'm sure it will wind up in burl at some point soon.



    The profile is pretty good for me. I like the tip and the belly though the heel could be a slight bit flatter though I can't see it in the not so great pics. Purely a personal thing here, and it really only took a small adjustment to my push cutting motion to get it right. I usually prefer a wider blade but this still feels good in hand and has plenty of knuckle clearance on the board.



    Grind is a bit unusual in that both faces are convexed a bit. Almost no wedging with this knife even on big fat onions though I haven't had a chance to cut too many different items with it. It does get some stiction though not too bad. As expected with a knife this thin, it cuts very well with very little effort. The tip is very thin and cuts wonderfully. Overall, this knife feels very nimble in hand.



    I broke it in by making a few different batches of fresh salsa (tomatoes, cukes, onions, garlic, corn, chiles, limes and a large amount of cilantro) for a 4th party so it saw plenty of acidic ingredients and the edge held up very well. In fact is would still do the Salty tomato test after a week of use (fairly heavy home use) . It did patina more than I expected as I was under the impression that being honyaki it would be more resistant. That said, there was no discoloration of any of the items being cut and didn't get any of that nasty smell coming off fresh steel. I am getting a bit of microchipping and attribute this to the factory edge, lack of microbevel, and heavy use on acidic items.

    So far so good, still a bit lighter than I prefer but getting used to it.

    Almost forgot to mention the cool kanji...



    Cheers!
    one man gathers what another man spills...

  2. #2
    Thanks for the review. Does it remind you of any other gyuto you've tried?

  3. #3
    Good review. 46mm is a lot shorter than the 53mm Maxim specifies. The height was putting me off trying one, but if they're available narrower, that's interesting.

  4. #4
    Senior Member
    Join Date
    Mar 2011
    Location
    Wales, UK
    Posts
    871
    Quote Originally Posted by dmccurtis View Post
    Good review. 46mm is a lot shorter than the 53mm Maxim specifies. The height was putting me off trying one, but if they're available narrower, that's interesting.
    big +1. Killer profile, looks like a draw-slicing machine.

  5. #5
    Senior Member Justin0505's Avatar
    Join Date
    Feb 2011
    Location
    Minneapolis, MN
    Posts
    1,433
    Thanks for the review and that has to be the best deal that I've ever seen on a honyaki.
    "I gotta tell ya, this is pretty terrific. Ha hahaha, YEAH!" - Moe (w/ 2 knives). http://www.youtube.com/watch?v=YVt4U...layer_embedded

  6. #6

    Join Date
    Feb 2011
    Location
    Salt Lake City, UT
    Posts
    2,318
    Alright...when are the 240's coming back in stock...

  7. #7
    Senior Member EdipisReks's Avatar
    Join Date
    Mar 2011
    Location
    Cincinnati, Oh
    Posts
    3,612
    Mine was about 50mm at the heel, which is a good height, in my opinion. Looks like this one was a bit thinner at the tip, OOTB, than mine. I love mine.

  8. #8
    Quote Originally Posted by Bram View Post
    Thanks for the review. Does it remind you of any other gyuto you've tried?
    No, closest would be Marko, but completely different grind. It's really not quite like anything else I've owned.

    Quote Originally Posted by Timthebeaver View Post
    big +1. Killer profile, looks like a draw-slicing machine.
    Yes it is a draw-slicing machine even with this rookie behind the wheel.

    Quote Originally Posted by EdipisReks View Post
    Mine was about 50mm at the heel, which is a good height, in my opinion. Looks like this one was a bit thinner at the tip, OOTB, than mine. I love mine.
    Mine is very thin at the tip; and BTW thanks for the recommendation, I really do think this is a great knife.
    one man gathers what another man spills...

  9. #9
    Senior Member Justin0505's Avatar
    Join Date
    Feb 2011
    Location
    Minneapolis, MN
    Posts
    1,433
    Beyond "high carbon japanese steel" doe anyone know what it's made out of? Seems that White #2 is most common as I've heard that it's easiest to work with and produces a nice dramatic hamon, but I've occasionally seen White #1, and Blue #2, and even Blue #1...
    Not that it really matters as the HT seems to make much more of a difference than the differences between the 1,2w,b hitachi steels... just curious.
    "I gotta tell ya, this is pretty terrific. Ha hahaha, YEAH!" - Moe (w/ 2 knives). http://www.youtube.com/watch?v=YVt4U...layer_embedded

  10. #10
    Senior Member
    Join Date
    Mar 2011
    Location
    Wales, UK
    Posts
    871
    Also seen a few White #3 Honyakis

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •