Quantcast
Adding bolster to western handle - Page 3
+ Reply to Thread
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Adding bolster to western handle

  1. #21
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    4,093
    What size (weight) peen hammer do you guys use and what type steel and pins do you use? I know that 416 is used, but not sure if is used for both stainless and carbon, or just stainless.

    M


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  2. #22

    Join Date
    May 2011
    Location
    Omaha, NE
    Posts
    199
    I have a 12 ounce hammer. I used 303 on my AEB-L suji. That is a good question about what to use on carbon blades too.

  3. #23

    PierreRodrigue's Avatar
    Join Date
    Mar 2011
    Location
    Alberta, Canada
    Posts
    1,772
    I use a 12oz to get 'em started, then a 3 lb to hammer them home. For bolsters, I think I would use stainless anyway, a patina on a blade is nice, but not so sure about the handle. If its an integral, thats a different story. I like 416.


    Feel free to visit my website, http://www.rodrigueknives.com
    Email pierre@rodrigueknives.com

  4. #24
    Sponsors

    Bill Burke's Avatar
    Join Date
    Mar 2011
    Location
    Lives in the mountains near Boise, Idaho.
    Posts
    495
    you can use about anthing on anything. I use 416 on both carbon and stainless. I also use nickle silver and brass. just make sure to use the same material for the pins if you don't want them to show. I have even cut some of the bolster material and turned pins on the lathe to get a match.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts