Quantcast
Need a Magnetic Strip Recommendation
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Need a Magnetic Strip Recommendation

  1. #1

    Join Date
    Mar 2013
    Location
    Los Angeles, CA
    Posts
    25

    Need a Magnetic Strip Recommendation

    Hi,

    I need a recommendation for a magnetic strip. I'm looking for a 24" wood strip that looks great. I'm currently looking at Marko's and one from Uusi. Does anyone have experience with either or another recommendation?

    Here are the pros and cons to each as I seem them.

    Marko: http://www.tsourkanknives.com/index....ory_pathway-18
    - Looks great
    - Love to support KKF vendors
    - Surely top quality workmanship and strong magnets
    - Interesting, semi-trapazoidial shape. Anyone know if this is functional or just a design element?

    -Only negative for me is that the strip is one piece with keyhole mounting brackets.


    Uusi: http://uusi.us/collections/kitchen/p...kko-knife-rack
    - Looks great
    - Love the two piece mounting system with the dove tail joint

    - Not sure about the strength of the magnets
    - Not a KKF vendor


    Also, found a couple of nice looking strips on Etsy. Not sure about ordering from there...
    http://etsy.me/13c5Ing
    http://etsy.me/11vLihg

    Thanks!

  2. #2
    Senior Member
    stereo.pete's Avatar
    Join Date
    Mar 2011
    Location
    Chicago
    Posts
    1,756
    Mag Blok was the standard a couple of years ago, I have three and they are fantastic!

    http://benchcrafted.com/Magblok.html
    Twitter: @PeterDaEater

  3. #3
    Senior Member bahamaroot's Avatar
    Join Date
    Jan 2013
    Posts
    577
    I made my own. Bought a 1x3x24" piece of maple at HD and some magnets from CMS Magnetics. Stained and finished the wood, routed some 1/2" holes in the back for the magnets and was good to go.
    Fun project and it looks and works great.

  4. #4
    Senior Member
    Join Date
    Sep 2012
    Location
    Seattle, WA USA
    Posts
    240
    Quote Originally Posted by stereo.pete View Post
    Mag Blok was the standard a couple of years ago, I have three and they are fantastic!

    http://benchcrafted.com/Magblok.html
    I have had one of these for about two years now and it has served me very well. I need to buy a couple more of them actually.

  5. #5
    I have six strips of Magblok and I'm very satisfied.

  6. #6
    Senior Member daveb's Avatar
    Join Date
    Mar 2012
    Location
    Just outside Tampa
    Posts
    737
    I've three and while I think they are a great value, there are some shortcomings.

    Standard offerings are 12 and 18 inches. Price 30-40 bucks. Cool. I got a quote on a 22 inch and it was about 130. For that I am still looking.

    The OP is looking for a 24 inch. Two 12s would be an easy answer but there is a "dead" spot on last inch of all of mine. That would work out to 2 inches of no knife in the middle.
    Dave
    Older and wider.

  7. #7
    There's a lot of love for Mag Bloks, but mine was enough of a stinker that I wouldn't get another. And I mean that both literally and figuratively: It stank. And it stank. Very poor strength, stained out of the box, insufferably greasy, and also, it stank. Support from Benchcrafted was nonexistent. Replaced it with some generic strip off Amazon that served me well until its retirement.

  8. #8

    Where to install

    I don't want to hijack the thread at all, but am very interested to know where folks hang magnetic strips in their home kitchens. I haven't been able to figure that one out very well, so I have two wood blocks on the countertop (a Gerber and a Shun) -- both large blocks with lots of slots, but they take up lots of space. I'd be interested to know where folks place magnetic strips for both convenience and safety.

  9. #9
    Senior Member Mucho Bocho's Avatar
    Join Date
    Feb 2012
    Location
    Raleigh, NC
    Posts
    1,280
    Doc, Here is a shot of mine to the right of the sink over the counter. many of these knives have been sold for others but this will give you a feel for placement

    One thing you can give and still keep...is your word.

  10. #10
    Senior Member brianh's Avatar
    Join Date
    Jun 2013
    Location
    NJ, near NYC
    Posts
    438
    I recently got a maple Mag Blok and found that the last couple inches on one side were not usable. All of my knives, both stainless and carbon would not hold well there, and my gyuto would shoot 45 degrees! All knives held well on the rest of the blok, all the way to the other end. Customer service was great from benchcrafted, but they felt it was my knives. They even sent me a return label. They tested and said it was fine. They offered to send me another. I took them up on the offer since I thought it was still worth the price. They can seem a bit curt over emails and I do find it odd how it could be all my knives only on one end of the board, but, I can't complain about how quickly they responded. Curious if #2 will have the same issue.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts