Quantcast
my first nogent handle - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: my first nogent handle

  1. #11
    Senior Member andre s's Avatar
    Join Date
    Apr 2013
    Location
    Upstate NY
    Posts
    79
    Hey thanks for the comments!
    Although it didn't take much time to complete, it was a trick to get the shape (almost) right. I could have done better with the butt. The tenon (to the ferrule "mortise") wasn't as bad as i had expected, just a bit of elbow grease. and the blackwood...a "tad bit messy" and really clogs up sandpaper/file. But, it finishes nicely. I'm happy you (ecchef) appreciate the minor detail of reusing the ferrule and find it still has a vintage look (thanks VB).

    Benuser,
    The original knife weighed 171g and this one weighs 178g with the new handle. It feels like the balance shifted more than the 7g delta. It's slightly longer (approx 1/4", in order to avoid dealing with the end of the tang which used to be exposed). That probably helped move the extra weight back a bit. Unfortunately, I didn't balance the original. But, it now balances at almost exactly 1" north of the finger guard. In my limited and yet unrefined experience, it feels better in hand.

    As an aside, although my wife was uncomfortable with my 10" TI nogent (225grams), she can't get enough of this one (which is also 10", but much more nimble). She prefers it to her 8" gyuto...just goes to show that length doesn't always tell the whole story when it comes to comfort in use, as others have mentioned here before.

    Thanks again all!
    cheers

  2. #12
    Senior Member
    sachem allison's Avatar
    Join Date
    Aug 2011
    Location
    nyc
    Posts
    3,959
    so, what your saying is length isn't everything.
    I haven't lived the life I wanted, just the lives I needed too at the time.

  3. #13
    Senior Member
    sachem allison's Avatar
    Join Date
    Aug 2011
    Location
    nyc
    Posts
    3,959
    it just looks comfortable
    I haven't lived the life I wanted, just the lives I needed too at the time.

  4. #14
    Senior Member Johnny.B.Good's Avatar
    Join Date
    Aug 2011
    Location
    Bay Area, CA
    Posts
    2,956
    The shape looks great. Well done.

  5. #15
    Senior Member Geo87's Avatar
    Join Date
    Sep 2013
    Location
    Brisbane
    Posts
    304
    Looks great, really appreciate this.
    I've been dieing to know what the rats tail in nongents looks like.
    Great work

  6. #16

  7. #17
    The finish looks great. Could you tell us what you used?

  8. #18
    Senior Member andre s's Avatar
    Join Date
    Apr 2013
    Location
    Upstate NY
    Posts
    79
    hey thanks!
    apologies for the late response
    ...not sure why i only got a notification today of these comments...ah well

    "The finish looks great. Could you tell us what you used"
    sure. I sanded up to an 800 grit. Then, i used watco's teak oil as directed on can (heavy use, let dry for 45mins. wipe off, re-apply, wipe off after 15 mins. then let dry over night). After that, it's ready to use. i usually wait a few extra days and apply howard feed-n-wax over it. I'm fairly certain that's what i did here. i like ending up with something closer to a satin (instead of glossy) finish. And this routine seems to get me there.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •