Quantcast
The making of a chef's knife - Jim Arbuckle's technique (PIC Heavy!!)
+ Reply to Thread
Results 1 to 8 of 8

Thread: The making of a chef's knife - Jim Arbuckle's technique (PIC Heavy!!)

  1. #1
    Sponsors
    Join Date
    Apr 2013
    Location
    Seattle, WA
    Posts
    63

    The making of a chef's knife - Jim Arbuckle's technique (PIC Heavy!!)

    I've asked a few of the makers that we work with to show their techniques of making chef's knives. Below, Jim Arbuckle shows his technique with a knife we've just posted:
    http://www.epicedge.com/shopexd.asp?id=91648
    Jim and I went to the ABS school together in the early 90s and have been fast friends since we first met. He is one of the most genuine folks that I have ever had the opportunity to know. Jim makes a fantastic chef’s knife.

    Since the forum seems to be only allowing me to add 10 photos at a time, this'll be broken up into several messages. I’ll be adding the next segment in the next day or so.

    1. Select a sheet of steel of the appropriate thickness and type.
    Click image for larger version

Name:	Arbuckle_1.jpg
Views:	63
Size:	76.7 KB
ID:	18348
    2. Pick out a design for the knife or knives. Do I use a pattern I’ve done before or do I start fresh.
    Click image for larger version

Name:	Arbuckle_2.jpg
Views:	72
Size:	81.0 KB
ID:	18349
    3. Chef’s knife pattern traced on the steel (try to keep the tip of the knife away from the end of the sheet; this reduces the chance getting inclusions in the blade).
    Click image for larger version

Name:	Arbuckle_3.jpg
Views:	59
Size:	42.8 KB
ID:	18350
    4. Try to maximize use of steel.
    Click image for larger version

Name:	Arbuckle_4.jpg
Views:	207
Size:	88.9 KB
ID:	18351
    5. Knife blanks are cut out of sheet utilizing a metal cutting band saw. Cuts are usually almost straight due to the blade width.
    Click image for larger version

Name:	Arbuckle_5.jpg
Views:	126
Size:	81.0 KB
ID:	18352
    6. Here is the Chef’s knife blank after cutting with the band saw.
    Click image for larger version

Name:	Arbuckle_6.jpg
Views:	65
Size:	71.4 KB
ID:	18353
    7. Next, it goes to the grinder and a 60 grit belt to profile the blank. (Shown in the foreground is my Burr King and in the back you can see the KMG grinder.)
    Click image for larger version

Name:	Arbuckle_7.jpg
Views:	146
Size:	128.3 KB
ID:	18354
    8. Here is the blank after is has been profiled. Some of the mill scale and imperfections removed from the flats. Note finger grove is left rough.
    Click image for larger version

Name:	Arbuckle_8.jpg
Views:	116
Size:	66.6 KB
ID:	18355
    9. Using a flat surface (bandsaw table), a tungsten carbide tipped scribe and a small machinists’ vise, I mark the center.
    Click image for larger version

Name:	Arbuckle_9.jpg
Views:	60
Size:	104.4 KB
ID:	18356
    10. Position the tip of the scribe close to the center of the edge.
    Click image for larger version

Name:	Arbuckle_10.jpg
Views:	56
Size:	57.0 KB
ID:	18357

  2. #2
    Sponsors
    Join Date
    Apr 2013
    Location
    Seattle, WA
    Posts
    63
    deleted (couldn't get it to add in the iamges in line)
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	Arbuckle_19.jpg‎
Views:	53
Size:	39.0 KB
ID:	18369  

  3. #3
    Interesting!
    I try to be the man I am..in times of broken lives. Shattered dreams and plans..standing up to fight. Pressures and demands..staring at the knife. Holding in your hands..

  4. #4
    Senior Member labor of love's Avatar
    Join Date
    Dec 2011
    Location
    dirty south, louisiana
    Posts
    2,191
    wow. this is really, really cool.

  5. #5
    Senior Member Baby Huey's Avatar
    Join Date
    Aug 2013
    Location
    Houston, Tx
    Posts
    353
    This is a ccool post. Appreciate the insight.

  6. #6
    Senior Member Mrmnms's Avatar
    Join Date
    Oct 2012
    Location
    Long Island
    Posts
    899
    Just posted my Arbuckle in newest knife buys. Excellent finish, check the filing on the spine. Your friend Jim did a great job on this one Dan . The blank looks very familiar

  7. #7

    Join Date
    Mar 2011
    Location
    Bangor Maine
    Posts
    338
    Work in progress posts are my favorite. Keep them up!

  8. #8

    Join Date
    Apr 2011
    Location
    Near Seattle, WA
    Posts
    290
    I like the scribe clamped in the vise. I ground an old file to a point and stack tape or bus. cards under it to raise and lower. I like this better. And, that Maple Burl is CRAZY!!! Thanks. -M

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts