Results 1 to 9 of 9

Thread: Katsuobushi Kezuriki krisis

  1. #1

    Katsuobushi Kezuriki krisis

    Any hints on how to use a katsuobushi kezuriki? I got one a few months ago and have managed to get about 1 ribbon off it. Tried moving the blade down until it barely stuck up above the board...no dice just powder. Adjusted it higher and now the tiny flakes jam in the gap and bits fly off the end!

    What am I doing wrong here? Watched youtube clips of wizened katsuobushi masters in action and well its just shaving...

    It is driving me freakin' insane

  2. #2
    Quote Originally Posted by JCHine View Post
    Any hints on how to use a katsuobushi kezuriki? I got one a few months ago and have managed to get about 1 ribbon off it. Tried moving the blade down until it barely stuck up above the board...no dice just powder. Adjusted it higher and now the tiny flakes jam in the gap and bits fly off the end!

    What am I doing wrong here? Watched youtube clips of wizened katsuobushi masters in action and well its just shaving...

    It is driving me freakin' insane
    How old is the katsuobushi that you're using?
    Michael
    "Don't you know who he is?"

  3. #3
    Senior Member
    sachem allison's Avatar
    Join Date
    Aug 2011
    Location
    nyc
    Posts
    3,973
    do you have the blade facing the wrong way?
    I haven't lived the life I wanted, just the lives I needed too at the time.

  4. #4
    How old? Guess I bought it about 6 months ago; it is very hard and has been kept in a sealed container to minimise air absorption. No date on the package so I'm not sure how old it was prior to purchase.

    From what I can see the blade is in correctly; Kiriba facing downwards into the tray area.

  5. #5
    Senior Member Baby Huey's Avatar
    Join Date
    Aug 2013
    Location
    Houston, Tx
    Posts
    351
    Are you pushing or pulling into the cut?

  6. #6
    Are you pushing or pulling into the cut?
    Tried it both ways actually. Until the blade was lifted pulling was easier but now either way works just as *ahem* badly

  7. #7
    Senior Member Baby Huey's Avatar
    Join Date
    Aug 2013
    Location
    Houston, Tx
    Posts
    351
    From my limited experience I was taught to pull into the cut and glide on the push. Also don't have to press down hard while cutting.

  8. #8
    Senior Member Baby Huey's Avatar
    Join Date
    Aug 2013
    Location
    Houston, Tx
    Posts
    351
    Double post.
    Last edited by Baby Huey; 09-12-2013 at 09:03 AM. Reason: double post.

  9. #9
    Thanks for all your help guys it is greatly appreciated. Normally I'm pretty good at working stuff out; even if it is the knowledge that I'm crap at it and need to practice a lot more, but this has me stumped.

    pull into the cut and glide on the push. Also don't have to press down hard while cutting.
    Pulling did become practical once the outer layers had been removed. Had a lot of issues with it catching and digging in. This started a viscous circle of the katsuobushi catching, so it became wavy and then catching again. To fix it the blade was withdrawn so it barely came about the wood bed (so it could not catch) and with some work managed to get one section pretty smooth.

    Next step is to push the blade higher again and see if i can fix the jamming that way.

    Thinking it might be a dud bit of fish but getting a new one is going to be a challenge.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •