Quantcast
tang broaches? block size?
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: tang broaches? block size?

  1. #1

    tang broaches? block size?

    Hello everyone, I was wondering if any of you use tang broaches to open up the tang hole?( does that sound right.lol). Also , what is a good size for a wood block to be - used for the oct handles and other types. 1 1/2 x 6" ?. The ones I use for hunters and edc is a min of 1 1/2 x 1 x 5"-Thank you-Mark

  2. #2
    Das HandleMeister apicius9's Avatar
    Join Date
    Feb 2011
    Location
    Honolulu, HI
    Posts
    3,314
    Quote Originally Posted by MAREKZ View Post
    Hello everyone, I was wondering if any of you use tang broaches to open up the tang hole?( does that sound right.lol). Also , what is a good size for a wood block to be - used for the oct handles and other types. 1 1/2 x 6" ?. The ones I use for hunters and edc is a min of 1 1/2 x 1 x 5"-Thank you-Mark
    Not sure what a tang broach is? I use a drill press... Blanks I try to get in 1 1/4 x 1 1/8 x 5 minimum - that doesn;t leave much room for error, so a bit larger is fine, especially if they may warp during stabilizing. I have almost everything stabilized except for the obvious ones like ebony, ironwood or very oily wosewoods.

    HTH,

    Stefan

  3. #3

  4. #4
    Das HandleMeister apicius9's Avatar
    Join Date
    Feb 2011
    Location
    Honolulu, HI
    Posts
    3,314
    Thanks Dave, I had never heard the word - my vocabulary in such specific areas is still a bit limited...

    Stefan

  5. #5


    Bill Burke's Avatar
    Join Date
    Mar 2011
    Location
    Lives in the mountains near Boise, Idaho.
    Posts
    501
    those broaches are all right but the ones tha MS John Perry sells are way better. The only problem being John's are harder to get and cost about 100.0 apiece.

  6. #6

    Join Date
    Apr 2011
    Location
    Near Seattle, WA
    Posts
    290
    I use broaches all the time in my handles. Definitely worth making yourself at least one.


    I made these as a gift, but if you went over to the forum-that-shall-not-be-named, I'm sure you could talk one of the other custom/forging guys into making you one with some of their scrap steel. You don't even need handles like this, just a little bulb on the end is all I have on mine. I have a long skinny one that is also used for scraping out the glue inside my sword scabbards. Quite useful little guys.
    -M

  7. #7
    Ive made my own broaches and had some good results ( compared to how I used to dig into a block ) but MS John Perry's is hard to beat. Its worth the price!! Michael Rader those are some beauties!!-Marekz

  8. #8

    Join Date
    Mar 2011
    Location
    Bangor Maine
    Posts
    342
    I just got a John Perry broach for 65 dollars from him because I just bought the shank and will handle it myself.

  9. #9
    Hello , so um, as far as the size block i would want is 1 1/4 x 1 1/8 x 5? I was thinking to be safe 1 1/2 x 1/2 x 6 would be optimal for someone trying out a different style handle. In general however, when you all look for blocks or cut your own is 1 1/4 x 1 1/8 x 5 abouy right. I also dont want to waste alot of wood. Most of my cut blocks are 1 1/2 x 1 1/8 x 5 but it seems like an odd size to try an oct handle- Thanks-Mark

  10. #10
    Senior Member

    SpikeC's Avatar
    Join Date
    Feb 2011
    Location
    PDX
    Posts
    3,773
    My finished handles are about 1X3/4 and whatever length, so I shoot for just bit over that in the rough, I do the finish sizing with a hand plane for the most part so I can work pretty close. It kind of depends on how you work and what tools you use. Make some and see how it works for you! A little practice doesn't hurt, ya know!
    Spike C
    "The Buddha resides as comfortably in the circuits of a digital computer or the gears of a cycle transmission as he does at the top of a mountain."
    Pirsig

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •