Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25

Thread: Maker's mark - right or left side?

  1. #11
    Senior Member
    WildBoar's Avatar
    Join Date
    Feb 2011
    Right side for people who cut facing an audience (open kitchens?), and left side for those of us who cut facing a wall/ backsplash

    And for pics, I like to place the knife with the edge parallel to the counter edge, and the handle on the right, so the mark would need to be on the left to show up in the pic. (it's not that big a deal to flip the knife so the handle is on the left and the mark on the right faces up. But being a 'rightie', that just feels a bit weird )
    David (WildBoar's Kitchen)

  2. #12
    Make your knives stand out from the rest! I think you already know what side.

  3. #13
    As a user, the side the mark is on matters to be approximately 0.00.

    I think the whole notion of what side is facing up, or facing out while cutting is important is also a bit silly. Most of use could tell what the knife is, or narrow it down, from the profile alone, and then want to pick it up and check it out. People who are not knife nuts are not going to recognize the name, or be able to see it from that far away. If they think it looks cool enough while it is on your board or while you are using it, they will ask to look at it and you can tell them who made it.

    One thing to note, I currently have a Fowler passaround, his mark is on the left side. But it is a little low and close to the bolster, and etched with acid. So it is right under my thumb when I pinch grip, and the acid from everyone's hands have kinda washed out part of the mark. So make sure the placement isnt under the thumb, or use a deep etch/forged mark.
    "God sends meat and the devil sends cooks." - Thomas Deloney

  4. #14
    Senior Member

    Join Date
    Feb 2011
    Pensacola, FL, USA
    For a Western double-bevel knife, I'd say the left side; when you start making single-bevel knives, then the right side of a right-handed knife, or the left side of a left-handed knife.

    Wherever you decide to put it, use Butch's method to get a nice deep etch. Don't "cheap out" like what was done on the Richmond Addict. When you get around to making a 270, I want mine to display the maker's mark even after the blade's been polished.

    Also, if it's not too much time and expense, etch the type of steel that was used for the blade.

    One last thing. Have you considered serializing them?


  5. #15
    The mark isn't a big deal, but it's a nice detail I think. The Hattori forum knife logo on the left annoys me, for example, because I gotta put it into the case the "wrong way"

    I think the main consideration business-wise is this: do more of the customers prefer to see knives with the tip going left or going right with the edge down? Or edge left or right with the tip pointing up? Subtle things like that, especially when considering the online environment, can subconsciously influence comfort levels and thus likelihood of clicking that Buy button.

    Not likely to deter a buyer set on the knives in question, but it could nudge someone who's browsing around trying to decide. A subconscious feeling of discomfort can tip the decision, I think.

    I don't have any scientific backing here, just a thought based on how images of knives going one way or another "feel" when I see them.

  6. #16
    Get with the times Dave...names, kanji...those are all ancient! Just put a QR code on the blade, that way anyone who takes a picture of it with their cellphone get's it's browser directed right to your website!

    "God sends meat and the devil sends cooks." - Thomas Deloney

  7. #17
    Senior Member stevenStefano's Avatar
    Join Date
    May 2011
    Norn Iron
    Both sides. The markings on knives can really enhance their look. I also love the proper engraved markings like on Masamotos for example

  8. #18
    for me its left side for double bevels , Right for single bevels and LRH for just blades

  9. #19
    Engorged Member
    El Pescador's Avatar
    Join Date
    Mar 2011
    +1 on both sides, stamped!

  10. #20
    Senior Member Potato42's Avatar
    Join Date
    May 2011
    North Carolina
    Lol Dave looks like you shoulda made a poll!
    - Sean

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts