Quantcast
Working on another board
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Working on another board

  1. #1
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,449

    Working on another board

    I was starting to get a little self conscious yesterday until Mr Heckler said he wanted the curly Mahogany board.
    I really liked the board and my wife did as well, but I was starting to think we were the only ones.
    After Mr Heckler asked for the board I went home and started thinking about what to make next.
    Making the boards involves a lot of hand sanding.
    For me it is relaxing and my mind tends to wander.
    I heard somewhere else that this called a Zen moment.
    When I was a kid, my parents called it daydreaming.
    Whatever you call it, I enjoy making the boards.

    This one is based on a photo I saw in a food magazine I read while in an airport a couple years ago.
    Hard to get the perspective from the photo but it is kind of fan shaped. The end with the hole is a couple inches narrower than the solid end. Right now there is still a lot of sanding to do before I am ready to start oiling it. This is the last piece of the blister maple. Not quite as bold figure as the other piece I used but still nice.

    I was thinking it could be used as a serving board.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@burlsales.com
    Visit our web store

  2. #2
    Senior Member Crothcipt's Avatar
    Join Date
    Jan 2012
    Location
    wyoming, closer to nowhere than somewhere.
    Posts
    3,501
    I know what you mean about zen moments, I have a knife that went from 50/50 to 70/30 when thinning. Hope your zen moments don't take your board from being flat.
    Chewie's the man.

  3. #3
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,449
    I just finished. I am really happy how this one turned out.

    the other side


    It's kind of large. 29" long by 7&1/4" at the narrow end and 9&1/2" at the wide end and about 1" thick.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@burlsales.com
    Visit our web store

  4. #4
    Senior Member
    Join Date
    Jun 2013
    Posts
    152
    That'd be a nice serving board!

  5. #5
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,449
    Thanks ar11.
    I am going to show it to the wife now and see what she thinks.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@burlsales.com
    Visit our web store

  6. #6
    Senior Member zitangy's Avatar
    Join Date
    Apr 2011
    Location
    SIngapore
    Posts
    496
    A personally hand made item for a person is a very special gift... always!!! Its one of a kind that money cannot buy!

    In case she does not want it.... I am most open to it

    Rgds D

  7. #7
    Senior Member
    Join Date
    Jun 2013
    Posts
    152
    Mark - im not too knowledgeable about cutting boards, but i heard end grain is preferable becuase of the self healing properties. Your previous board sold caught my eye, but I was unsure about longterm wear on the board. Afraid use would totally scuff up the nice finish. Any opinions on how well the character of the grain would hold up to longterm use?

  8. #8
    Senior Member Notaskinnychef's Avatar
    Join Date
    Nov 2012
    Location
    Victoria, BC, Canada
    Posts
    535
    Nice work, nothing says love like giving your wife a piece of hard, oiled wood

  9. #9
    Senior Member
    Join Date
    Jan 2013
    Location
    San Antonio TX
    Posts
    174
    I really wanted that board, and I can't stop thinking about it. Please don't stop your experiments!

  10. #10
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,449
    Quote Originally Posted by ar11 View Post
    Mark - im not too knowledgeable about cutting boards, but i heard end grain is preferable becuase of the self healing properties. Your previous board sold caught my eye, but I was unsure about longterm wear on the board. Afraid use would totally scuff up the nice finish. Any opinions on how well the character of the grain would hold up to longterm use?
    I have a single piece board I use at home daily.
    Yes, it does show the cut marks. Not glaring but they are there.
    With some of the pretty boards I was thinking, use one side for light cutting and the other side for display when using as a serving board.
    I am using mineral oil and board butter so the board can be freshened up with oil when it needs it.

    I will probably be making a section of my web store to sell some of the things I make.
    These keep me going between batches of stabilized blocks coming in.
    I had expected a new batch of wood to arrive Friday but no such luck.
    So I had a choice, clean my work area or work on a few boards.

    The reason I took this board home to show the wife was to get an opinion on the size and shape.
    Sometimes I like weird stuff and then she says "that's just weird".
    She liked the size and shape of this one.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@burlsales.com
    Visit our web store

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts