Results 1 to 6 of 6

Thread: Handle material

  1. #1

    Join Date
    Feb 2011
    Location
    Salt Lake City, UT
    Posts
    2,312

    Handle material

    Does anyone know if there are any legal ramifications to using Caribou horn in handles? They are not protected are they? Just covering my bases.

  2. #2
    Caribou to the best of my knowledge are thriving, and not included in bans. The only issue I can see, would be in the sale, purchase of these antlers, internationally. Even within ones home country, there are legal ramifications in the sale/purchase of "animal parts" If you harvested these antlers, or bought them, as long as you have the tags/permit for the animal, your fine.

    As a knife handle, be aware, unstabilized antler, will move more than say buffalo horn.


    Feel free to visit my website, http://www.rodrigueknives.com
    Email pierre@rodrigueknives.com

  3. #3

    Join Date
    Feb 2011
    Location
    Salt Lake City, UT
    Posts
    2,312
    Thanks Pierre, I hoped you would chime in. I figured you would have the best knowledge of the subject, being from the from the frozen north and all....

    I had hoped to use it as a spacer between a buffalo horn ferrule and a cocobolo body. Is it too unstable to attempt that?

  4. #4
    There are a couple ways to use it, depending if you want the natural outside rough texture, or if you intend to shape it like buffalo horn. I would think you intend to shape it and blend it smoothly with the rest of the handle. If the animal fed well, the outer dense clear bone, will be thicker, if it fought through a hard winter/spring, it might be fairly thin. Cut a portion slightly larger than your finished handle, remove as much of the inner hollow material as you can, fill the voids with epoxy, or use CA to help "stabilize it" You should be ok. If the outer bone is really thin, you may have issues.


    Feel free to visit my website, http://www.rodrigueknives.com
    Email pierre@rodrigueknives.com

  5. #5
    Das HandleMeister apicius9's Avatar
    Join Date
    Feb 2011
    Location
    Honolulu, HI
    Posts
    3,396
    Can I throw in a question about stag while we are at it? I have a few nice rounds that seem very dense, hardly any inner hollows. Do they behave about the same, should they be treated with anyhing? Intuitively, I would say they seem very dense and stable, but what do I know...

    Stefan

  6. #6
    Stag is one of the best to use, most good quality rounds have a nice thick, dense, outerlayer, that has very little movement. It is most sought for the "popcorn" finish some higher quality pieces have for bowies, and fighters, as well as some hunters. You should have no, or very little issues.


    Feel free to visit my website, http://www.rodrigueknives.com
    Email pierre@rodrigueknives.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •