Quantcast
A "Fun for Me" Project
Results 1 to 5 of 5

Thread: A "Fun for Me" Project

  1. #1
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,525

    A "Fun for Me" Project

    I like to try to make stuff. Doesn't always matter if I am successful but I enjoy trying to do something creative. If it turns out well and is useful that is a plus. I am not a good one for following directions so I tend to wing it and hopefully learn as I go along. Usually I figure out what not to do first. This project is an example. As I go along I will figure out what to do differently, what jigs to make and the tools to use so the next one I make will turn out better. Who knows, maybe I will eventually get good at this.

    A short while ago my back was acting up so I had to find an old garage sale cane to keep from falling on my face. My wife asked "couldn't you make something like that?" So here is my first attempt. It won't get all the way finished today but here is the start of the project.

    This photo shows the cane I am using as a reference and some scrap wood I will be using. This style of cane was comfortable for me and was very usable.


    Did a rough outline of the handle.


    Drilled both pieces so I could use a dowel to strengthen the joint between the 2 pieces. (Note to self; make a couple jigs and use correct drill bit.) Using a hand held drill was not a good idea.


    Cut out rough handle shape. (Note to self; don't use old dull bandsaw blade.)


    Glued handle to the shaft. (Note to self; make a clamping jig.)


    Evened up the sides.


    Next I will need to even up the edges and clean up the profile of the handle. After that I will be using a router for the shaping.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@gmail.com
    Visit our web store

  2. #2
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,525
    Here I cleaned up the edges.


    And did the rough shaping with a router.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@gmail.com
    Visit our web store

  3. #3
    Hey Mark, when your back is all better you can use that as a putter. Nice, fun job. Hope you feel better.
    Please visit my store at www.dreamburls.com Imagine the possibilities!
    Email me at service@dreamburls.com
    Visit our Facebook page at www.facebook.com/dream.burls
    All sales are backed with a no questions asked money back guarantee.

  4. #4
    Senior Member
    sachem allison's Avatar
    Join Date
    Aug 2011
    Location
    nyc
    Posts
    3,960
    nice work, I'll have to post pics of my cane.lol you'll appreciate it.
    I haven't lived the life I wanted, just the lives I needed too at the time.

  5. #5
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,525
    This is sloppy work but I learned what I need to know so I can do it right with the next one.
    I still plan to complete the shaping and finishing on this one.
    But, I have some curly rock maple on the way that I will use to make some nicer canes.
    I am also going to start practicing with my carving so I can do some carved handles that don't look like a kid made them.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@gmail.com
    Visit our web store

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •