Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: remakes

  1. #1
    Senior Member

    Join Date
    Sep 2013
    Location
    Saint-Petersburg, Russia
    Posts
    901

    remakes

    I wanted to make a handle similar to DT masterpiece. In my poor man's version wooly mammoth was replaced by raffir, bloodwood by bubinga and micarta by ebony. And I made second spacer thin to keep accent on the first spacer.

    Ended up with this:




    Messed a bit with tang hole and didn't like the finish. Still struggling with applying shellac. So decided to make another one. Since I don't have any more bubinga (nor do I have any desire to work with bubinga in future), opted for a cocobolo instead.





    Don't like the proportions on this one. But the tang hole is nice and cocobolo grain is really nice in person.
    but I'm a bit bored with these remakes, so probably gonna apply epoxy and call it day.

  2. #2
    Very nice indeed! I know your frustration with making the tang hole, I've got a small drawer full of handles that I've screwed up the slot on.

    Be well,
    Mikey
    Rule #1- Don't sweat the small s%&t, rule #2- It's ALL small s%&t
    Mikey

  3. #3
    Anybody have any specific recommendations on rasps/files/etc. that are good for this?

  4. #4
    Quote Originally Posted by seward View Post
    Anybody have any specific recommendations on rasps/files/etc. that are good for this?
    Yes, WoodCraft has a good set of micro rasps for about $50
    Rule #1- Don't sweat the small s%&t, rule #2- It's ALL small s%&t
    Mikey

  5. #5
    Senior Member
    Join Date
    Feb 2013
    Location
    VA
    Posts
    746
    That is really nice looking! Do you not like the proportions because the handle looks to small (diameter wise).

  6. #6
    Nice work!
    Twitter: @PeterDaEater

  7. #7

    Join Date
    Mar 2011
    Location
    Houston TX
    Posts
    1,318
    Is the handle part hollow,do you have a drillpress?

  8. #8
    Really nice, clean work! Diggin' that cocobolo grain

  9. #9
    Senior Member

    Join Date
    Sep 2013
    Location
    Saint-Petersburg, Russia
    Posts
    901
    Quote Originally Posted by mkriggen View Post
    Yes, WoodCraft has a good set of micro rasps for about $50
    Thanks for this Mikey! I was looking for a good small rasps for quite some time. Liogier are nice but damned expensive. Those woodcraft rasps looks promising!

    Quote Originally Posted by Bill13 View Post
    That is really nice looking! Do you not like the proportions because the handle looks to small (diameter wise).
    Good question. You see, every handle that I've made so far, I've made without using any measuring tools. I mean I'm still eyeballing tang hole, all the sizes and shapes. This leads to some imperfections here and there. I don't consider them to be bad. Actually I like some of the imperfections… they add a feeling of handmade thing. But some imperfections are just ugly. Like spacers that are uneven in their width or the shape could be too tapered etc. I intentionally make handles that are a bit smaller in diameter. And they aren't octagonal. That's because I do think this makes them more comfortable in hand. I'm searching for a silver bullet here… gonna try some bizarre shapes where half is octagonal and another half is oval. And diamond like shape. I've made prototypes from clay to see if the shape is gonna be comfortable in hand and I tend to like so far.

    And in this particular handle I don't like the size of ferrule. It should have been longer. And the whole handle should be a bit shorter. And black butt part should probably be smaller. Actually I've made 3 handles in this design. The third one is much bigger and has better proportions… it gonna fit my 210 Shig when I finish it. So 3 handles in the same design were enough for me.


    Quote Originally Posted by mhenry View Post
    Is the handle part hollow,do you have a drillpress?
    I got a drillpress lately but it's too small and allows making holes of only 3-5cm… so on this one I started with drill press and then continued to drill freehand to make hole deeper. It's not hollow, but the hole is pretty deep… around 4/5 of length.
    I want a real drillpress badly… the one I have right now is just a small toy that shakes badly when drilling. This hobby became pretty expensive, so I had to slow down on new tools.


    Without your feedback it would be much less fun for me, so please don't hesitate to post any criticism and ideas.

  10. #10
    Let us know how the diamond shape works for you. I made a large gyuto handle with an eight sided diamond shape and didn't care for it. It just didn't set in my hand right, always felt like it wanted to turn. I ended up resanding it into a more conventional octagon shape. It's a little trim for a large gyuto now, but looks like a nice suji handle

    Be well,
    Mikey
    Rule #1- Don't sweat the small s%&t, rule #2- It's ALL small s%&t
    Mikey

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •