Quantcast
2nd Wa, 1st Etch
+ Reply to Thread
Results 1 to 5 of 5

Thread: 2nd Wa, 1st Etch

  1. #1
    andre s's Avatar
    Join Date
    Apr 2013
    Location
    Upstate NY
    Posts
    77

    2nd Wa, 1st Etch

    Hey all,
    Recently got my first nakiri. It's a Masakage Yuki, white #2, clad. Since the stock handle wasn't the best and i hadn't run my power tools in a few months, i decided to finally scratch an itch i had . My first re-handle was a Wa (almost a year ago!) and since then i had only done westerns. i was also eager to try an etch for the first time. I found a detailed "how-to" from Dave that was, of course, quite useful...ferric chloride and vinegar.
    The handle is african blackwood with maple ferrule. Copper spacer.
    i tried a mortised handle this time which was a bit trickier than the doweled technique on the first. i didn't get the tenon perfectly shaped for the mortise as you may be able to see below.
    In any event...always fun!
    all criticism is welcome!
    thanks again
    -Andre

    before


    after







  2. #2
    Senior Member
    Join Date
    Mar 2013
    Posts
    122
    Looks great to me! Handle looks slick, and the Etch looks sweet! Great contrast


    Sent from my iPhone using Tapatalk

  3. #3

    knyfeknerd's Avatar
    Join Date
    Feb 2012
    Location
    Charlotte, NC AKA The Queen City! The lint-filled belly button of the south.
    Posts
    2,499
    Looks good Andre. You can always get some dye(specially formulated) for your epoxy to match the color of the wood on the ferrule.
    Nice etch BTW
    If "Its" and "Buts" was candy and nuts, we'd all have a Merry Christmas
    -Cleon "Slammin'" Salmon

  4. #4
    Senior Member
    Join Date
    Sep 2013
    Location
    Saint-Petersburg, Russia
    Posts
    747
    Nicely done. I couldn't spot any imperfections from these photos. Just a nicely done handle with right size and right shape

  5. #5
    andre s's Avatar
    Join Date
    Apr 2013
    Location
    Upstate NY
    Posts
    77
    hey thanks for comments all!
    knerd
    I'm currently using an epoxy that's grey (JB Weld). I'm guessing that a dye could only make it darker (which would have worked nicely for this knife...). would you suggest a light epoxy (or maybe clear) for the dye? How would i go about getting a specially formulated dye?
    thanks again

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts