mtmwood
Well-Known Member
- Joined
- Mar 5, 2014
- Messages
- 183
- Reaction score
- 0
I collected all scrap in my shop and made three large end grain cutting boards.
I used eight wood species: oak, ash, walnut, maple, padauk, sapele, cherry and hornbeam. All woods I worked with last month.
The pattern is less contrasting because of use a lot of medium tone woods - oak, ash and cherry.
I made three additional cuts, so the pieces of wood are small enough.
Is it better?
I used eight wood species: oak, ash, walnut, maple, padauk, sapele, cherry and hornbeam. All woods I worked with last month.
The pattern is less contrasting because of use a lot of medium tone woods - oak, ash and cherry.
I made three additional cuts, so the pieces of wood are small enough.
Is it better?
![13460619493_0efca80b9f_c.jpg](https://proxy.imagearchive.com/005/0056b4286453e4d4f9983fb1abf8788f.jpg)
![13460868164_25e3ae88ed_c.jpg](https://proxy.imagearchive.com/92c/92c0c509e4ceee589c1f96045069b885.jpg)