Burl Source
Weird Wood Pusher
- Joined
- Jun 13, 2011
- Messages
- 4,340
- Reaction score
- 7
This would probably best be described as a light use cutting board. There are no feet so you can use both sides of the board.
The wood is a quarter sawn piece of lightly figured California Claro Walnut.
I arched the sides and ends instead of leaving it as a plain rectangle.
It has been drum sanded flat then finish sanded to 600 grit.
So far I have applied just one heavy application of food grade mineral oil. I will be applying a few more coats over the weekend.
The photo with the white background shows the closest to true coloring with my computer.
Dimensions are 18" long, by just under 14" wide and 1&1/4" thick.
Price is $200 plus shipping. US shipping should be about $20. International about triple that, sorry.
If you would like to get the board just make a post that says "I'll take it".
Then send me a PM with your email address so I can send a Paypal invoice for payment.
Side A
Side B
The wood is a quarter sawn piece of lightly figured California Claro Walnut.
I arched the sides and ends instead of leaving it as a plain rectangle.
It has been drum sanded flat then finish sanded to 600 grit.
So far I have applied just one heavy application of food grade mineral oil. I will be applying a few more coats over the weekend.
The photo with the white background shows the closest to true coloring with my computer.
Dimensions are 18" long, by just under 14" wide and 1&1/4" thick.
Price is $200 plus shipping. US shipping should be about $20. International about triple that, sorry.
If you would like to get the board just make a post that says "I'll take it".
Then send me a PM with your email address so I can send a Paypal invoice for payment.
Side A
Side B