Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: CPM 154 and DewCarta

  1. #1

    CPM 154 and DewCarta

    Hi guys, this is a 240 mm CPM154 Gyuto with Stainless welded/integral-ish bolsters.

    Blade is at HRC 61, ScotchBrite finish

    Scales are a new product called DewCarta. They have G10 liners, and are fastened with stainless corby bolts/epoxy

    I just need to brand and sharpen

    This one is the last of the prototype of the midtech line and is available. Asking $400 plus shipping






    Feel free to visit my website, http://www.rodrigueknives.com
    Email pierre@rodrigueknives.com

  2. #2
    Senior Member chefcomesback's Avatar
    Join Date
    May 2013
    Location
    Hunter Valley , Australia
    Posts
    806
    Looks great Pierre , somebody should grab it fast


    Sent from my iPhone using Kitchen Knife Forum

  3. #3
    Senior Member hambone.johnson's Avatar
    Join Date
    Dec 2011
    Location
    chicago, IL
    Posts
    95
    Hooray !! Pierre is back !!!

  4. #4
    Beautiful weld work on the bolsters, very smooth.

    Be well,
    Mikey
    Rule #1- Don't sweat the small s%&t, rule #2- It's ALL small s%&t
    Mikey

  5. #5
    Senior Member
    Join Date
    May 2013
    Location
    Taiwan
    Posts
    593
    Sweet. I normally don't like flamboyant handles but this is a very nicely done knife.

    You should do another cleaver someday.

  6. #6
    That's cool as hell Pierre, I like the whole package.

  7. #7
    awesome pictures in your photobucket! where do you find them?

  8. #8
    i mean the landscape ones.

  9. #9
    Senior Member marc4pt0's Avatar
    Join Date
    May 2012
    Location
    MD
    Posts
    1,624
    Oh snap! When I saw this the other day I missed that it was for sell! Very interested. Is this blade the same as the other mid techs- super thin with flex and a distal taper on the tip that's like as thin as aluminum foil? Wicked cutter...

  10. #10
    As this one is a prototype, it is heavier. The starting stock is 1/8" so heavier above the heel, but still a full distal taper, and a nice thin tip. Convexed blade faces to help alleviate stiction.



    Feel free to visit my website, http://www.rodrigueknives.com
    Email pierre@rodrigueknives.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •