Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: AutoCad people. Could use your help.

  1. #1

    AutoCad people. Could use your help.

    Looking for (down the road) help with AutoCad drawings. Will barter.

    M


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  2. #2
    Hey, I'm johnnychance's brother, he sent me over here. I'm a mechanical engineer, I'm pretty handy with CAD stuff. I don't use AutoCad, but I'm proficient in Solidworks, Pro/E, Rhino3D and 3dsMax.. So I'm sure between those I can help you out. What do you need? Feel free to PM me or email me if you'd prefer. sinfab at gmail.com is my mail.

  3. #3
    Quote Originally Posted by tomservo View Post
    Hey, I'm johnnychance's brother, he sent me over here. I'm a mechanical engineer, I'm pretty handy with CAD stuff. I don't use AutoCad, but I'm proficient in Solidworks, Pro/E, Rhino3D and 3dsMax.. So I'm sure between those I can help you out. What do you need? Feel free to PM me or email me if you'd prefer. sinfab at gmail.com is my mail.
    Hey Tom,
    thanks. Will be in touch with you shortly.

    Marko


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  4. #4
    Senior Member Salty dog's Avatar
    Join Date
    Mar 2011
    Location
    Caledonia
    Posts
    1,931
    Hey Marko, not to hijack the thread but I'm in a mood. (not a bad one, just one) I'm guessing you're thinking knife design. Don't forget about the "personality" of the knife. Does Shig use CAD?

    While on the subject of technology and knives: What's with the microscopes? I have to admit when I sent TK a knife I told him no microscopes. For a good reason. (I relented) How can you tell how an edge is going to perform by looking at it with a microscope? Not to mention how impersonal that is. It's like determining how good a dog will be with a MRI.

  5. #5
    I don't need AutoCad to design a knife. For that I have my eyes and some experience of seeing/handling knives from makers I like. I 'design' a profile by eye and use a granite plate to check on the curve (or anvil, as it is closer to the grinder).

    I want help with Autocad with layout for cutting. Water-jet cutting or laser cutting blanks makes sense for the following reasons.

    It takes time to profile each blade, and one needs a professional metal cutting bandsaw to make it efficient. Some steel manufacturers offer cutting blanks service, so it makes sense if you have no need for webbing, and if a manufacturer is overseas, or on the other coast, shipping cost of the steel sheets can be substantial For instance, blanks can ship UPS while sheets only freight.

    I just found out that one can lay out several types of knives into one file and have all cut form one sheet. That makes whole lot better, as unless one is makes knives by hundreds, what the point to gen one profile from a whole sheet of steel?

    Though I rely on equipment, my hands and eye are my most valuable tools. I don't rely on computer of any sorts, except the temperature readout on the kiln.

    M


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  6. #6
    Senior Member Salty dog's Avatar
    Join Date
    Mar 2011
    Location
    Caledonia
    Posts
    1,931
    You aren't messing around are you?

  7. #7
    Quote Originally Posted by Salty dog View Post
    You aren't messing around are you?
    No, but I am working so slow that it's embarrassing. It took me several hours to profile just three knives. In that sense, waterjet cutting is well worth it.

    M


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  8. #8
    Senior Member
    mr drinky's Avatar
    Join Date
    Feb 2011
    Location
    St. Paul, MN
    Posts
    3,184
    Quote Originally Posted by Marko Tsourkan View Post
    Looking for (down the road) help with AutoCad drawings. Will barter.

    M
    If you don't find a proficient knifenut familiar with AutoCad, then you can always go to sites like guru.com or freelancer.com and post a job, project price, timeframe etc. and you will get freelancers offering you their service.

    I've used it before (not for autocad) and was satisfied with the results.

    k.
    "There's only one thing I hate more than lying…skim milk, which is water that's lying about being milk." -- Ron Swanson

  9. #9
    Quote Originally Posted by Marko Tsourkan View Post
    Hey Tom,
    thanks. Will be in touch with you shortly.

    Marko
    Marko,
    Sounds good. I have parts made by waterjet and laser cutting companies quite often, its pretty cheap and very fast. As long as you don't need a super precise cut (tolerances are typically ~0.015"), its a good way to go.
    Usually you don't need to lay out the whole sheet for them, just send them the CAD drawing and tell them the quantity and material (or supply your material if it is something uncommon). They will take care of the tool paths. That probably depends on the company doing the work though, perhaps higher volume focused companies want the whole sheet laid out for them.. but I usually deal in small quantities (2-5 parts). I use Austin Waterjet, they've been great. Turn around is usually 2 or 3 days.

  10. #10
    Tom,
    do you have a waterjet company in mind near by? I am in Westchester, NY, but go to Connecticut all the time. I assume you are in CT, as that's where John is.

    M


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •