Quantcast
CCK 1303 - Remove the Lacquer?
+ Reply to Thread
Results 1 to 6 of 6

Thread: CCK 1303 - Remove the Lacquer?

  1. #1
    Senior Member/ Internet Hooligan
    Join Date
    Mar 2011
    Posts
    1,090

    CCK 1303 - Remove the Lacquer?

    Hi guys,

    My CCK 1303 showed up yesterday afternoon, and having today off I decided to use it to prepare all three of my meals. Being a carbon junkie, I was a little disappointed by the lack of any visible patina at the end of the day, which got me online only to learn that it's laminated, or lacquered, to help prevent this.

    My question is, if I don't have any problem caring for carbon, is it prudent to remove the lacquer rather than letting it wear off naturally? I know acetone is often recommended for this: would I apply it to the entire blade, or just the lower half beneath the kuro-uchi finish? Is the carbon laminated because it's particularly reactive and foul smelling, so maybe letting it degrade on it's own is for the best?

    Any comments welcome,

    -Jack

  2. #2
    Senior Member/ Internet Hooligan
    Join Date
    Mar 2011
    Posts
    1,090
    As an aside, I love this knife. First experience with a chuka-bocho and definitely not the last.

    Tonight's dinner, courtesy of the CCK, is 3-minute "Asian" salad!


  3. #3
    Senior Member UglyJoe's Avatar
    Join Date
    Mar 2011
    Posts
    427
    You could remove with acetone, but be careful with the Kurouchi finish. Acetone shouldn't take it off, but scrubbing could flake it off. Most of my carbon knives I have removed the lacquer on, but for whatever reason, I didn't with the CCK. Where it has worn off the blade has taken a dead black patina though, so that's pretty cool.

    I'd let it wear off naturally with this one, but that's just me...

  4. #4
    Senior Member
    Chef Niloc's Avatar
    Join Date
    Feb 2011
    Location
    Long island NY
    Posts
    1,082
    Quote Originally Posted by UglyJoe View Post
    You could remove with acetone, but be careful with the Kurouchi finish. Acetone shouldn't take it off, but scrubbing could flake it off. Most of my carbon knives I have removed the lacquer on, but for whatever reason, I didn't with the CCK. Where it has worn off the blade has taken a dead black patina though, so that's pretty cool.

    I'd let it wear off naturally with this one, but that's just me...
    +1, I'd let it wear off. BTW nice board.

  5. #5
    Senior Member/ Internet Hooligan
    Join Date
    Mar 2011
    Posts
    1,090
    Thanks, that's the little Boardsmith I won which, single handedly, destroyed the joy I once felt in every other board I own.

  6. #6
    Senior Member
    Chef Niloc's Avatar
    Join Date
    Feb 2011
    Location
    Long island NY
    Posts
    1,082

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts