Results 1 to 10 of 10

Thread: 1k natural stones

  1. #1

    1k natural stones

    Hey all. Well I've been wanting to increase my very small natural collection which consist of a aoto blue and a 7-8k small natural. I've been thinking about adding a lower grit natural anyone know of a good place to pick up one? So far the only one I've found is a amakusa white natural sold by hida tools (which is the same place I got my aoto from) the price $33 and the size is 225mm x 70 x 58. So not sure if anyone else has used something close to it or can offer up another. Thanks again all.

  2. #2
    I've used the amakusa and can't recommend it. The one i got had significant inclusions and cuts extremely slow. 40 plus passes to raise a burr

  3. #3
    you can try the red amakusa it is faster than White and a bit coarser.
    So far the only lower grit natural I have tried that is not slow on knives is Aizu.

  4. #4
    Senior Member BertMor's Avatar
    Join Date
    Mar 2011
    Boca Raton, FL
    I thought that it was pretty well established by most Japanese sharpeners/polishers that lower grit JNats are just not cost effective. Up to about 1k-1.2k they get better results with synthetics, then move on to JNats to finish.

    I'm just saying.....
    Bert M.

    Why?! Because footballs don't have wheels!

  5. #5
    i use my monzento directly after my 500 grit stone with great results... it takes me up to about the 4-5k range when i'm done... awesome at bridging gaps.

    If you get a good aoto or aoto-like stone, you should be able to go directly from a coarse stone

    When i do naturals, i can do it in a 3-stone setup... 500 grit "diamond stone of awesomeness" (yeah... thats right... i named it "stone of awesomeness" :P ), monzento, and suita... DONE

  6. #6

    Am I correct in assuming that you don't sell these stones? I didn't find them on your web page, unless I missed them. Are you planning on carrying them? Do you know who does? (O.K., I'll head over to JNS right now, but perhpas I'll leave the question up to see if there are other options in case Maxim doesn't have them)

  7. #7
    They are stones in my personal collection and i am not selling them right now. I would say maybe Maxim is the guy to talk to.

  8. #8
    Sell them, Jon. Sell them.

  9. #9

  10. #10
    Senior Member rulesnut's Avatar
    Join Date
    Feb 2011
    45.3765, -75.6540
    You could use the excellent sharpener on the back of your electric can opener.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts