Quantcast
240 Suji
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: 240 Suji

  1. #1

    240 Suji










    240mm Suji 52100(4.6mm stock) Marko HT & Temper

    3.4mm over the heel
    2.4mm middle
    .69mm tip

    The finish is not the best but it was hot as hell in my garage yesterday and I just wanted to knock it out.

  2. #2
    Quote Originally Posted by RRLOVER View Post









    240mm Suji 52100(4.6mm stock) Marko HT & Temper

    3.4mm over the heel
    2.4mm middle
    .69mm tip

    The finish is not the best but it was hot as hell in my garage yesterday and I just wanted to knock it out.
    Wow, looks MUCH better than the blank I sent you - that sheet should be used for yanagi, miroshi or razor, not gyuto or suji.

    BTW, the suji should be 62RC. You must have sweated a lot doing that hand finishing (there is a huge difference in finishing 60RC and 62RC, unless you can grind all the way to 600grit). Let me know what you think of the HT. I have improved a lot since.

    M


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  3. #3
    Senior Member

    Join Date
    Feb 2011
    Location
    San Diego, CA
    Posts
    4,227
    That looks really good from here, Mario! Are you gonna do anything else to it before you put a handle on it? What's the thickness?

  4. #4
    She's not thin.

  5. #5
    Senior Member Adagimp's Avatar
    Join Date
    May 2011
    Location
    Tempe, AZ
    Posts
    125
    Great looking profile. I dig.

  6. #6
    Das HandleMeister apicius9's Avatar
    Join Date
    Feb 2011
    Location
    Honolulu, HI
    Posts
    3,314
    Quote Originally Posted by RRLOVER View Post
    She's not thin.
    ... But nicely shaped.

    Stefan

  7. #7
    Great looking blade. Well done!

    DarkHOeK

  8. #8
    Quote Originally Posted by RRLOVER View Post
    She's not thin.
    You can always grind it down some more.


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  9. #9
    Quote Originally Posted by Marko Tsourkan View Post
    You can always grind it down some more.
    I think it will be just fine.I set it in a Ho wood handle for now,I can't wait to take it to the stones.

  10. #10
    Quote Originally Posted by RRLOVER View Post
    I think it will be just fine.I set it in a Ho wood handle for now,I can't wait to take it to the stones.
    Me too.


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •