Quantcast
Nip And Tuck...
+ Reply to Thread
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33

Thread: Nip And Tuck...

  1. #1
    Senior Member

    Join Date
    Feb 2011
    Location
    San Diego, CA
    Posts
    4,227

    Nip And Tuck...

    A friend of mine sent me his father's old carbon Sab in the off chance I could give it a little face lift. This is the progression...


    Click image for larger version

Name:	Original (800x600).jpg
Views:	204
Size:	101.0 KB
ID:	1864Click image for larger version

Name:	Reprofile_1.0 (800x600).jpg
Views:	194
Size:	99.9 KB
ID:	1863
    Click image for larger version

Name:	Reprofile_1.1+bolster (800x600).jpg
Views:	194
Size:	100.8 KB
ID:	1866Click image for larger version

Name:	almost done.jpg
Views:	213
Size:	34.4 KB
ID:	1865

    You can probably see that some of the pitting is still there, some scuffs from coarse belts, etc and the f-ed up grind near the heel due to futzing around the the bloody bolster. Now that it's gone, I'll shave a little off that and fix the wavy grind. Other than that, you guys think I should make any other changes?

    If you're wondering, there is no edge on it, but it cuts like a freaking laser. Slightly convex 50:50 grind but I had to remove a lot of metal to get rid of most of the pitting.

  2. #2
    Senior Member EdipisReks's Avatar
    Join Date
    Mar 2011
    Location
    Cincinnati, Oh
    Posts
    3,479
    i wouldn't do much more to it. keep it as Sab as possible.

  3. #3
    Senior Member
    Join Date
    Aug 2011
    Location
    Canoga Park, CA
    Posts
    143
    I'm supremely impressed... and cuts like a freaking laser is good to know. Kind of the point of the (tragically abused) thing -- good to know it still has some fight in it!

  4. #4

    Join Date
    Sep 2011
    Posts
    314
    Looks good at this point. Unfortunately, you're giving me ideas I don't know if I can execute.

  5. #5
    Senior Member Benuser's Avatar
    Join Date
    May 2011
    Location
    Amstelveen, The Netherlands
    Posts
    2,053
    On some French knives you may find a flat part of about six centimeters from the heel, used for chopping, parallely to the board, with one hand near the tip and the other pinching lightly the upperside of the handle. Have you seen the remainings of such a flat part?

  6. #6
    Senior Member
    Join Date
    Mar 2011
    Posts
    346
    nice work mate, the only reason I would never buy a Sab is the damn bolster. I tried sharpening one once and the bolster pissed the hell out of me.

  7. #7
    Senior Member
    99Limited's Avatar
    Join Date
    Mar 2011
    Location
    LVW, Manchester, NJ
    Posts
    919
    What's the point of the bolster? Can you just grind it down?

  8. #8

    HHH Knives's Avatar
    Join Date
    Apr 2011
    Location
    Michigan
    Posts
    3,848
    That looks great. I wouldn't change it any more then you did. Looks like you fixed it up nice!

    Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth, Guided by the spirit.. Randy Haas

    Availible Knives

  9. #9

    Join Date
    Sep 2011
    Posts
    314
    Quote Originally Posted by Benuser View Post
    On some French knives you may find a flat part of about six centimeters from the heel, used for chopping, parallely to the board, with one hand near the tip and the other pinching lightly the upperside of the handle. Have you seen the remainings of such a flat part?
    I just got a new old stock Canadian Sabatier from the '50s, and it has that flat part. I thought it was mis-ground. Good to know.

  10. #10
    Senior Member

    Join Date
    Feb 2011
    Location
    San Diego, CA
    Posts
    4,227
    ER: I've never seen or owned a new Sab so I wouldn't really know what a Sab is "supposed" to be. This knife is basically a completely reground knife. The handle has been ground down in every dimension, the bolster has been mostly cut off and the rest ground down and smoothed for a comfortable right-handed pinch grip. The spine and choil have been rounded. The profile is the result of my attempt at saving as much steel as possible with no consideration for the original design.
    Benuser: I have no idea if this knife was once that way. When I received it, the edge profile was severely overground both in front of the heel and behind the tip. I have no problem putting such a flat area in, if you think it would be a good idea though.
    wsfarrell: Are you saying you want to do some similar modifications? If so, I'd be happy to tell you how I did this. I'm not sure it was the best way but I'm pretty happy with the result.
    99: You can grind it down but it's a PITA without some good grinding tools, unless you grind some every time you sharpen which is still annoying. Most of the used bolstered knives I've seen have a big bolster protruding out of the profile. Fixing that gets old fast.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts