Quantcast
Petty questions(with pics)
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Petty questions(with pics)

  1. #1
    Mike Davis's Avatar
    Join Date
    May 2011
    Location
    Jackson, MI.
    Posts
    1,526

    Petty questions(with pics)

    I decided to test out some15n20 for a petty. It is 150mm tip to heel, 34mm high at spine, and .075 to start. It has been HT and is in the oven tempering at 375 for 4 hours. Is this in spec to a normal ish petty? Also, full flat or partial height? would a 135mm handle work or should i stretch it to 140? Here is a pic of the profile.


    Also....stumped on which handle material to use...what ever i choose will get a ebony bolster


    Input please
    Thanks fellas
    Mike

  2. #2
    Senior Member
    Join Date
    Sep 2011
    Posts
    440
    Can't tell you much about designe but I likening material the blade is resting on for a handle.

  3. #3

    Join Date
    Mar 2011
    Location
    Rockport, TX
    Posts
    4,892
    At least at this point in my life, I'd never suggest a FFG on a kitchen knife.

    Its a little taller than normal, but petties are kind of free form compared to chefs knives. I like the look of it.

    I vote for the block on the left

  4. #4
    Senior Member

    Join Date
    Feb 2011
    Location
    San Diego, CA
    Posts
    4,221
    Like Eamon said, height is slightly on the large side and flat grinds are generally not the greatest. On block material, I also thought the one it was resting on looked good, if I had to go light-colored.

  5. #5
    The alleles created by mutation may be beneficial

    Join Date
    Apr 2011
    Location
    Hampton Roads, VA
    Posts
    1,872
    To me it looks more like what EE calls a petite gyuto than a petty, but that isn't necessarily a bad thing.

    I like the wood on the far right.

  6. #6
    Mike Davis's Avatar
    Join Date
    May 2011
    Location
    Jackson, MI.
    Posts
    1,526
    Maybe I will drop the height to about 30mm. I also have a block of ebony that would work on this. Maybe I will try that. Do petties have the flat heel area associated with the gyuto? This one does not....questions questions...this is a nice break from all the damn pins on the suji lol.
    Last edited by Mike Davis; 10-26-2011 at 02:22 PM. Reason: phone spelling errors

  7. #7
    Senior Member Salty dog's Avatar
    Join Date
    Mar 2011
    Location
    Caledonia
    Posts
    1,829
    IMO, depending on the knife I tend to like my length divided by 5.3 and round up to the nearest half. So I say 28.5 for height.

  8. #8
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    3,971
    Quote Originally Posted by Mike Davis View Post
    I decided to test out some15n20 for a petty. It is 150mm tip to heel, 34mm high at spine, and .075 to start. It has been HT and is in the oven tempering at 375 for 4 hours. Is this in spec to a normal ish petty? Also, full flat or partial height? would a 135mm handle work or should i stretch it to 140? Here is a pic of the profile.


    Also....stumped on which handle material to use...what ever i choose will get a ebony bolster


    Input please
    Thanks fellas
    Mike
    34mm sounds like a good height for me. As for handle length, I would go with 135mm.

    Now a question to you. Why is your tempering time so long? Are you doing 1x4Hr temper instead of 2x2Hr?

    M


    An expert is a man who has made all the mistakes which can be made, in a narrow field.
    -Niels Bohr

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  9. #9
    Mike Davis's Avatar
    Join Date
    May 2011
    Location
    Jackson, MI.
    Posts
    1,526
    I do 2this sessions of 2 hours each. I will get another profiled out tonight and see how the differences are. My personal one is a 135nice and I love it....

  10. #10

    Join Date
    Mar 2011
    Posts
    548
    i say since tyhe black bolster go with the spaltedmiddle block as that will make the black lines really pop on the handle

    so far as blade shape im no help as evey one will tell you they liek jsut a bit different (not saing that you cant go wrong but its kind of hard to )

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts