Quantcast
Bandsaw Help
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Bandsaw Help

  1. #1

    Join Date
    Mar 2011
    Location
    Houston TX
    Posts
    1,365

    Bandsaw Help

    I recently bought a really cheap bandsaw from Home Depot, and wow is it a piece of crap. It will not cut straight. I have been trying to set it up to cut straight for weeks. I give up, you get what you pay for.

    So I am looking for something better I dont have a bunch of room so would prefer a benchtop model. What would you guys suggest? Under $500.00

    Thanks, Mike

  2. #2
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    3,973
    Standalone ShopSmith, but you have to find one locally with a stand. Great quality, US made equipment. Better than Delta. You might want to put a larger pulley to slow it down a bit if you cut tropical hardwoods, but that's a minor adjustment. Another things is to replace the blade guides (blocks) to Carter guides (bearings, cost $100). Those will allow you to resaw wood very cleanly up to 4.5".


    An expert is a man who has made all the mistakes which can be made, in a narrow field.
    -Niels Bohr

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  3. #3
    Pabloz's Avatar
    Join Date
    Sep 2011
    Location
    Albuquerque, New Mexico
    Posts
    353
    The two that I use are 1) an old Delta Homecraft that I inherited from my father, this one is phenominal for wood, and 2) is a portable bandsaw used for metal that I built a vertical stand for. The Delta came out in the late '40s and is a cast iron work horse. Parts are still available and the only thing that has been replaced on this one in 50 years of use (between my father & I) is the rubber tires. The metal one is a HF and uses the standard 44 7/8" blades. This one has been great for the small metal cutting I need and also for some quick work outside. I made the stand out of a piece of 1/4" plate for the base and some 1/8" x 2" angle for the upright so that the saw is held vertical by to quick release clamps.

  4. #4
    Weird Wood Pusher Burl Source's Avatar
    Join Date
    Jun 2011
    Location
    Kerby, OR
    Posts
    3,249
    If you could spend a little more I would suggest a 14" Jet bandsaw.
    Here is a link to one on Amazon.



    I have 2 of these that I use here.
    One is just like the one in the link.
    The other has the 6 inch riser block, roller guides and re-sawing fence.

    They cut great, easy adjustments and simple to change blades.
    Mark Farley / It's a Burl
    Phone 541-592-5071, Email burlsource@burlsales.com
    Visit our web store

  5. #5

    HHH Knives's Avatar
    Join Date
    Apr 2011
    Location
    Michigan
    Posts
    3,635
    I would second Mark on the 14" saw. Jet or Ridged

    I have a Ridged. and its been running strong for 6 years and counting.

    Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth, Guided by the spirit.. Randy Haas

    240mm Stainless Gyuto!!

  6. #6

    Join Date
    Mar 2011
    Location
    Rockport, TX
    Posts
    4,892
    Amazing timing! I'll be watching this thread.

  7. #7
    Pabloz's Avatar
    Join Date
    Sep 2011
    Location
    Albuquerque, New Mexico
    Posts
    353
    Both of the ones I spoke about before are bench top and the two together would easily be under your $500.00 limit. Please allow me a second try at this with pics.

    Delta HomecraftClick image for larger version

Name:	PICT0001.jpg
Views:	36
Size:	63.7 KB
ID:	2666


    HF Portable w/ home make standClick image for larger version

Name:	PICT0003.jpg
Views:	41
Size:	69.7 KB
ID:	2667

  8. #8

    HHH Knives's Avatar
    Join Date
    Apr 2011
    Location
    Michigan
    Posts
    3,635
    I have a benchtop band saw (never could get it to cut straight on anything thicker then 1/2 inch) and a deep cut porta band (awesome tool for cutting metal) Yet I still recommend a 14" band saw or larger for resaw work, cross cutting etc. Especially for some of the woods we like as knife handles. Rosewoods and Iron woods and many others including stabilized block are very hard and dense.

    Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth, Guided by the spirit.. Randy Haas

    240mm Stainless Gyuto!!

  9. #9
    Senior Member

    SpikeC's Avatar
    Join Date
    Feb 2011
    Location
    PDX
    Posts
    3,773
    Here is another vote for the Shopsmith bandsaw, although mine is powered by the Mark 5 unit. I'm also using the 6X48 belt sander on the mark 5 to do all my blade grinding, and horizontal boring capacity to make handles.
    Spike C
    "The Buddha resides as comfortably in the circuits of a digital computer or the gears of a cycle transmission as he does at the top of a mountain."
    Pirsig

  10. #10

    Join Date
    Mar 2011
    Posts
    548
    i have a craftmen 12 inch and a roll n saw 14 inch
    let the saw do the work and get good blades
    making sure that you have proper tension on the blade will also help keep the cut on tracck

    that is the blade kerf and tooth TPI how wide is the blade all are things that can hell keep a cut straight

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts