I'd like to hear more about the tip as well.
I'd like to hear more about the tip as well.
I've never had trouble with tips. The only time they've given me a hard time is when I am trying to maintain the bevel on someone's knife and it has a really wide(re: acute) tip bevel. I'm not sure what causes this phenomenon, but I've seen many knives from cheapo kitchen knives to a Buck Vantage pro that, after the belly, they just go haywire and the edge gets either very acute or very obtuse.
I have two methods. One is that I sharpen standing up most of the time, and when I am doing the tip, I pick up my right hip some. This might sound odd, but I sort of sharpen with my whole body--if I just move my arms my bevels will not stay flat.
The second(probably less crazy sounding) is that I do all of my sharpening by ear; that is, I know when I am hitting the edge or not, by the sound the steel makes on the stone. Perhaps there are stones that provide poor aural feedback, but none I've used do. Especially on Japanese soakers when you get a slurry going--they are very noisy, and I found it very helpful when I was new. Essentially I just maintain the same sound throughout.
I just realized that we might be talking about something entirely different. I sure hope not.
I also have never had problems with sharpening the tips, as I've just always pretended the knife was laying on an invisible plane that held the angle, so I would have to lift the handle up and twist my wrist a bit to keep it consistent.
Most of my problems that I've had were in the first 6 months of sharpening, but were usually related to burr removal, pressure allocation, inconsistent angles and lack of intuitiveness in sound/feel that is only learned through experience.
I remember having my frustrations back then and thought about getting an EP at the time, but decided to continue to keep at freehanding...and then everything just kind of 'clicking' one day. From there on out, the edges I could produce were better than anything I've ever seen and my results were consistently good, and continued to get even better each time. Now everything is just so natural and I can't remember the last time I had any type of real issues while sharpening.
I've never thought tips were a problem, but a lot of people ask about them, and it makes me wonder whether I'm actually doing it right. I don't sharpen very often so it might be a year or two before I see a bird beak develop - I guess time will tell.
Learning to sharpen on your own, is a challenge. How does all that information on the internet and videos, translate into action? What feedback is important to pay attention to, and what can be ignored?
In my bumbling stumbling style of sharpening, I try as best as I can to identify an issue and then try to find an answer.
Watching a Curtis video, he mentioned that he counts down the number of strokes he does on each side the blade. I tried that, and found that I wasn't using my stones to their best advantage. Now I sharpen on a stone, until I can't tell if there is any improvement on the edge, before I move to the next stone.
Sharpening has been a series of baby steps. I'm either trying to solve a problem or try out an idea from the internet. Failure causes me to think of a new idea. Success means moving on to the next issue. To me an experienced sharpener is one who has solved all sorts of issues and tried a number of ideas.
Broke out a 1/4 inch chunk on the blade. Can't post a picture. Any special care required to regrind the blade?
Welcome Kim! Someone will be along with help shortly...you have stones? What type knife?
one man gathers what another man spills...
Where on the edge is it broken? Almost always if you chip off the tip you actually bring to top of the knife (non-cutting edge) down to the cutting edge, rather than sharpen the whole thing up
Don't bother answering this last question. The member asked to be removed from the list so he won't be here to follow up.
Although "I've been sharpening for years" (more like 4), but I still feel like a beginner (especially compared to people here). Although I have many questions, first I'd like to ask everyone about something I've been curious about.
When I sharpened knives in the past, I would do a series of edge leading strokes on the stones that would do the entire edge in a single stroke. And save the edge trailing strokes when finishing/stropping. But I've also seen people do edge-leading and trailing strokes both the whole edge and sections at a time (like one inch or so at a time, working their way across the edge).
I recently picked up a yanagi and I'm not sure which style to use to sharpen it. I've looked at the single bevel sharpening thread by Dave and he doesn't give these specifics. So now my questions. Why do people do the different styles? I feel like using single strokes for a whole edge helps me make a more even edge, but what are other people's preferences?