Quantcast
Material for strop backing
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Material for strop backing

  1. #1
    Senior Member
    Join Date
    Mar 2011
    Posts
    270

    Material for strop backing

    I've got some leather I'd like to try to make a few strops out of. I've had this stuff for ages, and I just figured I'd eventually run into a material of some sort I could glue it on, and presto, I've got a strop. This hasn't seemed to work out. My trouble is I'm worried about getting something that's suitably flat and that will not warp. This has made me rule out the wood in my hardware store. Strops I've bought in the past have come with a flexible rubber backing that seems to work ok, but I haven't been able to find any of it around either.

    Anyone have any ideas on a substance I could use, and better still where I could procure some?

  2. #2
    Senior Member
    Join Date
    Feb 2011
    Posts
    1,246
    1/2" acrylic 3x12" will be perfect.
    Also thick wood will not warp

  3. #3
    Senior Member

    SpikeC's Avatar
    Join Date
    Feb 2011
    Location
    PDX
    Posts
    3,773
    Medium density fiberboard will work well and is easily obtained at the Borg (Home Despot).
    Spike C
    "The Buddha resides as comfortably in the circuits of a digital computer or the gears of a cycle transmission as he does at the top of a mountain."
    Pirsig

  4. #4
    Senior Member spaceconvoy's Avatar
    Join Date
    Mar 2011
    Posts
    166
    I ordered a few sheets of nylon from two sources - Amazon and a surplus-materials-dude on ebay. None of the sheets were actually flat, and it was a PITA to sand down the nylon. But it's great stuff, and you can get away with a really thin backing that won't warp, down to 1/4" even.

  5. #5

    Join Date
    Feb 2011
    Location
    Salt Lake City, UT
    Posts
    2,327
    How about a magnet, like Ken's, available at craft stores for dirt cheap. I have been using them on balsa attached with gorilla glue.

  6. #6
    Senior Member
    Join Date
    Mar 2011
    Posts
    270
    All good suggestions, thanks.

    I'm intrigued by this magnet suggestion. Is there a pic or something somewhere of Ken's magnet?

    Otherwise I'll probably go with whichever of the other options I can find quickest. Or maybe I'll try them all and make a few, see which works best.

  7. #7

    Join Date
    Feb 2011
    Location
    Salt Lake City, UT
    Posts
    2,327
    Sorry, I meant keith from Hand America. You can check out his stropping supplies at chef knives to go, although most are sold out. I don't have any of his leather, but the magnet on his felt pad works great.

  8. #8
    Senior Member Cadillac J's Avatar
    Join Date
    Mar 2011
    Location
    Detroit
    Posts
    621
    Pretty sure Dave's wood bases have magnets for quick interchangability.

    http://www.japaneseknifesharpeningst...t-p/lhone1.htm

  9. #9
    Senior Member
    Join Date
    Mar 2011
    Posts
    270
    Thanks again.

  10. #10
    Senior Member
    Chef Niloc's Avatar
    Join Date
    Feb 2011
    Location
    Long island NY
    Posts
    1,088
    contact cement to thick glass would make for the most flat & level. Note: not all leather makes for good Strops. Leather needs to not only be veg tanned but it must be flat & of & it has to be flat & of uniform thickness & consistency, most leather is not. Other things go into making a good strop, like compressing then exposing the cells of the leather.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts